As a mechanical and electrical integration product,
brushless DC motor has better controllability and wide speed range. According
to its characteristics, a brushless DC motor control system based on
STM32F103ZET6 MCU is designed and realized, and then the control system was
analyzed and discussed. Adopted GPIO module, PWM module, timer module, etc.,
coupled with efficient PID algorithm, three main functions of this system have
been implemented, such as start stop control, position detection and
closed-loop speed regulation. The experimental results show that this control
system works well with low cost and high price-performance ratio.
Cite this paper
Jin, H. and Sun, X. (2017). Design of the Brushless DC Motor Driving System Based on STM32. Open Access Library Journal, 4, e3703. doi: http://dx.doi.org/10.4236/oalib.1103703.
Zhou, W.,
Pu, Q. and
Shang, C.
(2009) Research on Position Detection of Brushless DC Motor Based on Back EMF
Integral Method. Industry and Mine Automation, 8, 63-65.
Li, S.,
Ma, H.,
Lu, G. and
Li, X.
(2008) Brushless DC Motor Control Based on Back EMF Integral Compensation
Method. Small and Special Electrical Machines, 6, 37- 39.
Zhou, B.,
Wei, J.,
Mu, X. and
Yan, Y.
(2000) Brushless DC Motor Position Sensorless Based on Back EMF Logic Level
Integral Comparison Method. Transactions
of China Electrotechnical Society, 15, 5-9.
Wei, K.,
Ren, J. and
Zhang, Z.
(2004) Research on Rotor Position of Brushless DC Motor Based on Three Harmonic
Detection. Proceeding of the Chinese
Society for Electrical Engineering, 24, 163-167.
Tian, Y.,
Chen, P.,
Nie, S. and
Lu, Q.
(2015) Design and Application of Power MOSFET Driver Protection Circuit. Power Electronic Technology, 39, 73-74.
Guo, Y.,
Su, X.,
Li, Z. and
Chen, L.
(2012) Design and Application of MOSFET Drive and Protection Circuit. International Electric Elements, 20, 169-171, 174.
