Changes in the mechanical properties of Acrylonitrile-Butadiene Rubber (NBR)/Poly (vinyl chloride) resin binary blend were investigated. Poly (vinyl chloride) resin additives were within range (0 - 70) wt.%, and the measured mechanical properties included tensile strength, elongation, and compression strength. The obtained results showed that the tensile and elongation value of NBR starts to decrease with the addition of PVC resin to reach the maximum decrease at 70%, where the tensile strength was reduced by 85.23% and elongation by 90.44%. On the other hand, the compression strength of NBR improved after PVC resin addition and the optimum improvement was 82.55% at 70% PVC resin.
Cite this paper
Al-Mosawi, A. I. , Al-Maamor, M. H. , Marossy, K. , Yasser, H. A. and Abdulsada, S. A. (2019). Mechanical Properties of Acrylonitrile-Butadiene Rubber (NBR)/Poly (Vinyl Chloride) Resin Binary Blend. Open Access Library Journal, 6, e5956. doi: http://dx.doi.org/10.4236/oalib.1105956.
Al-Mosawi, A.I., Hashim, A.A. and Al-Maamori, M.H. (2019) Production of High Performance Mountings by Using Rub-ber-Polymer Waste. Open Access Library Journal, 6, 1-6. https://doi.org/10.4236/oalib.1105368
Al-Maamori, M.H., Al-Mosawi, A.I. and Abdulsada, S.A. (2018) Effect of Novolac Nanoparticles Additions on Specific Gravity of NBR/CR Blends. MATEC Web of Conferences, 178, Article ID: 04001. https://doi.org/10.1051/matecconf/201817804001
Kargarzadeh, H., Ahmad, I. and Abdullah, I. (2017) Mechanical Properties of Epoxy/ Rubber Blends, In: Parameswaranpillai, J., Hameed, N., Pionteck, J. and Woo, E., Eds., Handbook of Epoxy Blends, Springer, Cham, 279-314. https://doi.org/10.1007/978-3-319-40043-3_11
Yasser, H., Al-Maamori, M.H. and Al-Mosawi, A. (2014) Effects of Polyvinyl Chloride Addition on Swelling Resistance of Nitril Rubber. Research Journal of Recent Sciences, 3, 209-211.
Al-Mosawi, A.I., Al-Maamori, M.H. and Marossy, K. (2019) Rheological Properties of NBR/CR Blends as a Function of Silicon Dioxide Grain Size Gradation. Journal of Silicate Based and Composite Materials, 71, 43-45. https://doi.org/10.14382/epitoanyag-jsbcm.2019.8
Al-Maamori, M.H. and Al-Mosawi, A.I. (2017) The Impact of Novolac Wt.% Nanoadditives on Rheological Properties of NBR/CR Blends. International Journal of Fracture and Damage Mechanics, 3, 19-23.
Al-Maamori, M.H., Al-Mosawi, A.I., Yasser, H.A. and Jabbar, Z. (2014) Mechanical Properties of Acrylonitrile-Butadiene Rubber Reinforced by Polyvinyl Chloride Particles. Proceedings of 1st National Conference for Engi-neering, Engineering College, University of Mustansiriyah, Iraq, 26-27 March 2014.
Bartczak, Z. and Galeski, A. (2014) Mechanical Properties of Polymer Blends. In: Utracki, L. and Wilkie, C., Eds., Polymer Blends Handbook, Springer, Dordrecht, 1203-1297. https://doi.org/10.1007/978-94-007-6064-6_13
Al-Maamori, M.H., Al-Mosawi, A.I. and Abdulsada, S.A. (2017) The Rheological Effect of SiO2 Nanoparticles Additives for NBR/CR Blends. Journal of Catalyst and Catalysis, 4, 1-4.
Al-Maamori, M.H., Al-Mosawi, A.I. and Abdulsada, S.A. (2016) Rheological Behavior of Rubber Blends. 2nd International Conference on Innovative Trends in Engineering, Science and Management (ICITESM-16), YMCA , Jai Singh Road, Delhi, India, 19 November 2016.
Liu, X.Q., Al-Mosawi, A.I. and Li, B. (2014) Materials Science and Advanced Technologies in Manufacturing II: Selected. The 4th International Conference on Materials Science and Engineering (ICMSE2014), Jiujiang, China, 27-28 December 2014.
Al-Mosawi, A.I., Ali, M.M. and Mohmmed, J.H. (2012) Experimental Approach to Mechanical Properties of Natural Rubber Mixing with Calcium Carbonate Powder. International Journal of Physical Sciences, 7, 6280-6282.
Al-Maamori, M.H., Al-Mosawi, A.I. and Saadon, L.M. (2013) Effect of Physical Additives of Shells Powder on Mechanical Properties of Natural Rubber. International Journal of Technical Research and Applications, 1, 31-33.
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J. and Deri, F. (2018) Polylactic Acid Blends: The Future of Green, Light and Tough. Progress in Polymer Science, 85, 83-127. https://doi.org/10.1016/j.progpolymsci.2018.07.001
Al-Mosawi, A.I. (2013) Effect of Shells Powder Filler Additives on Hardness and Tensile Strength Properties of Natural Rubber. Journal of Materials Physics and Chemistry, 1, 35-36. https://doi.org/10.12691/jmpc-1-3-2
Al-Maamori, M.H., Al-Mosawi, A.I. and Yasser, H.A. (2014) Mechanical Behavior of NBR-PVC Mixture after Immersion in Different Media. International Journal of Advanced Research in Engineering and Technology, 5, 34-39.
Shokri, A.A., Bakhshandeh, G. and Farahani, T.D. (2006) An Investigation of Mechanical and Rheological Properties of NBR/PVC Blends: Influence of Anhydride Additives, Mixing Procedure and NBR Form. Iranian Polymer Journal, 15, 227-237.
Ishiaku, U.S., Lim, F.S., Ishak, Z.A. and Senake Perera, M.C. (1999) Mechanical Properties and Thermooxidative Aging of a Ternary Blend, PVC/Enr/Nbr, Compared with the Binary Blends of Pvc. Polymer-Plastics Technology and Engineering, 38, 939-954. https://doi.org/10.1080/03602559909351623
Alalkawi, H.J.M., Hantoosh, Z.K. and Majid, R.H. (2010) The Tensile and Fatigue Properties of Vulcanized Natural Rubber under Ambient Temperatures. Diyala Journal of Engineering Sciences, 3, 16-24.
ASTM D1229-03 (2015) Standard Test Method for Rubber Property-Compression Set at Low Temperatures. ASTM International, West Conshohocken, PA. https://doi.org/10.1520/D1229-03R15
ASTM D412-16 (2016) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension. ASTM International, West Conshohocken, PA. https://doi.org/10.1520/D0412-16