Developing new absorbing and shielding materials with a large band of frequency and high performance to allow the coexistence of the electronic components without the damaging electromagnetic interference (EMI) is needed. For this reason, this work is focused on polycaprolactone (PCL) and rice husk particles (RHP) prepared at filler percentage of 0 to 60 wt% leading to the formation of PCL/RHP composites. The RHP was prepared by washing with water, acetone, sun-dried and grinded in a milling machine. The particles obtained were then sieved into sizes of 200, 400, 800 and 1000 μm. The PCL/RHP composites for each of the dimensions were prepared in a Thermo Haake blending machine. The paste obtained from the blend was then fabricated into pellets for different characterization purposes. Mechanical properties of the prepared composites were determined using different analysis tools, while the dielectric and shielding properties of the composites were investigated using the open ended coaxial probe via a vector network analyzer. The results from findings showed that tensile strength, impact strength, flexural strength, elongation at breakage and hardness and the dielectric constant of the samples were affected with inclusion of the RHP. However, the elongation at breakage was observed to decrease with increase in the weight (%) of the RHP. The particle size of RHP played a significant role in enhancing dielectric constant and shielding effectiveness (SE) of the composites, as analysis showed that PCL/RHP composites’ average dielectric constant was 3.6, 3.0, 2.7 and 2.4 while SE was ？12.4, ？10.6, ？7.9, ？6.0 dB for the 200, 400, 800 and 1000 μm, respectively. Based on the result obtained it is concluded that the manufactured composites can be tailored for shielding applications in the telecommunication industries.
Cite this paper
Yakubu, A. , Abbas, Z. and Abdullahi, S. (2020). Mechanical, Dielectric and Shielding Performance of Rice Husk/Polycaprolactone Composites Enhanced via Rice Husk Particles Inclusion. Open Access Library Journal, 7, e6514. doi: http://dx.doi.org/10.4236/oalib.1106514.
Ahmad, A.F., Abbas, Z., Ab Aziz, S., Obaiys, S.J. and Zainuddin, M.F. (2018) Synthesis and Characterisation of Nickel Oxide Reinforced with Polycaprolactone Composite for Dielectric Applications by Controlling Nickel Oxide as a Filler. Results in Physics, 11, 427-435. https://doi.org/10.1016/j.rinp.2018.08.041
Delviawan, A., Suzuki, S., Kojima, Y. and Kobori, H. (2019) The Influence of Filler Characteristics on the Physical and Mechanical Properties of Wood Plastic Composite (s). Reviews in Agricultural Science, 7, 1-9. https://doi.org/10.7831/ras.7.1
Yakubu, A., Abbas, Z., Esa, F. and Tohidi, P. (2015) The Effect of ZnO Nanoparticle Filler on the Attenuation of ZnO/PCL Nanocomposites Using Microstrip Line at Microwave Frequency. International Polymer Processing, 30, 227-232.
https://doi.org/10.3139/217.2993
Kim, H.S., Lee, B.H., Choi, S.W., Kim, S. and Kim, H.J. (2007) The Effect of Types of Maleic Anhydride-Grafted Polypropylene (MAPP) on the Interfacial Adhesion Properties of Bio-Flour-Filled Polypropylene Composites. Composites Part A: Applied Science and Manufacturing, 38, 1473-1482.
https://doi.org/10.1016/j.compositesa.2007.01.004
Abdalhadi, D.M., Abbas, Z., Ahmad, A.F. and Ibrahim, N.A. (2017) Determining the Complex Permittivity of Oil Palm Empty Fruit Bunch Fibre Material by Open-Ended Coaxial Probe Technique for Microwave Applications. BioResources, 12, 3976-3991. https://doi.org/10.15376/biores.12.2.3976-3991
Musinski, W.D. and McDowell, D.L. (2016) Simulating the Effect of Grain Boundaries on Microstructurally Small Fatigue Crack Growth from a Focused Ion Beam Notch through a Three-Dimensional Array of Grains. Acta Materialia, 112, 20-39.
https://doi.org/10.1016/j.actamat.2016.04.006
Peng, Y., Nair, S.S., Chen, H., Yan, N. and Cao, J. (2018) Effects of Lignin Content on Mechanical and Thermal Properties of Polypropylene Composites Reinforced with Micro Particles of Spray Dried Cellulose Nanofibrils. ACS Sustainable Chemistry & Engineering, 6, 11078-11086.
https://doi.org/10.1021/acssuschemeng.8b02544
Sanjay, M.R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S. and Pradeep, S. (2018) Characterization and Properties of Natural Fiber Polymer Composites: A Comprehensive Review. Journal of Cleaner Production, 172, 566-581.
https://doi.org/10.1016/j.jclepro.2017.10.101
