%0 Journal Article
%T Removal of arsenic(III) and arsenic(V) on chemically modified low-cost adsorbent: batch and column operations
%A Palas Roy
%A Naba Kumar Mondal
%A Shreya Bhattacharya
%A Biswajit Das
%A Kousik Das
%J Applied Water Science
%@ 2190-5495
%D 2013
%I Springer
%R 10.1007/s13201-013-0082-5
%X Batch and column operations were performed utilizing thioglycolated sugarcane carbon (TSCC), a low-cost adsorbent, to remove As(III) and As(V) from aqueous systems. Under optimized batch conditions, the TSCC could remove up to 92.7 and 91.4 % for As(III) and As(V), respectively. An artificial neural network model showed the validity of TSCC as a preferable adsorbent for arsenic [As(III) and As(V)] removal in batch studies. In column operations, removal efficiency increases with increase in influent arsenic concentration and adsorbent dose and decreases with increase in flow rate. At an adsorbent dose of 6.0 g, flow rate 3.0 mL min 1, and initial arsenic concentration 1,500 ¦Ìg L 1, the arsenic uptake capacity of TSCC for As(III) and As(V) was found to be 85.01 and 83.82 ¦Ìg g 1, respectively. The Thomas model was used to analyze the column experimental data. Results from the column operations indicated that the adsorption behavior of arsenic [As(III) and As(V)] fits exceptionally well with the Thomas model with high correlation coefficient and very low standard error. Examinations of scanning electron microscopy and FTIR spectroscopy reveal that high arsenic adsorption favors surface complexation on the adsorbent surface.
%K Arsenic
%K Removal
%K Low-cost adsorbent
%K Batch
%K Column
%U http://link.springer.com/article/10.1007/s13201-013-0082-5