%0 Journal Article
%T The Effect of Velocity and Load on the Tribological Behavior of the Plasma-nitrided Layer on 2Cr13 Steel under Grease-lubricated Conditions in Vacuum<br>速度和载荷对脂润滑2Cr13钢离子渗氮层摩擦学行为的影响
%A YANG Jian-qun
%A LIU Yong
%A LI Xing-ji
%A WANG Li-qin
%A YE Zhu-yu
%A YANG De-zhuang
%A HE Shi-yu
%A <br>杨剑群
%A 刘勇
%A 李兴冀
%A 王黎钦
%A 叶铸玉
%A 杨德庄
%A 何世禹
%J 摩擦学学报
%D 2013
%I 
%X The friction and wear tests of the plasma-nitrided layer on a 2Cr13 steel under perfluoropolyether (PFPE) type grease-lubricated condition in vacuum were conducted on a pin-on-disk tribometer. The morphologies of the worn surfaces were observed by using scanning electron microscopy. The chemical states of typical elements on the worn surfaces were examined by means of X-ray photoelectron spectroscopy. The chemical compositions of grease before and after friction tests were analyzed by using fourier transform infrared spectroscopy. Experimental results show that under grease-lubricated condition, a transition of wear mechanisms from a mild wear to a mixed mild wear with increasing the normal load and the sliding velocity was observed. Tribochemical reactions between the nitrided layer and PFPE grease during sliding in vacuum gave birth to the product of FeF3. FeF3 can be a catalyst to promote the degradation of PFPE grease to release acid fluorides. Increasing the normal load and the sliding velocity would accelerate the reactions between the nitrided layer and grease, and further promote the degradation of grease.
%K nitrided layer
%K PFPE grease
%K vacuum environment
%K wear mechanism<br>渗氮层
%K PFPE润滑脂
%K 真空环境
%K 磨损机制
%U http://www.alljournals.cn/get_abstract_url.aspx?pcid=6E709DC38FA1D09A4B578DD0906875B5B44D4D294832BB8E&cid=5D344E2AD54D14F8&jid=2F467A5C6371C830162AAA01D7DAD07A&aid=6F6A9C00E44852FBAA62DFA8992B4631&yid=FF7AA908D58E97FA&vid=27746BCEEE58E9DC&iid=CA4FD0336C81A37A&sid=09ABD5535D9B6D45&eid=E44E40A2398D4F2A&journal_id=1004-0595&journal_name=摩擦学学报&referenced_num=0&reference_num=19