%0 Journal Article
%T DISTRIBUTION OF TWO-PHASE FLOW IN A DISTRIBUTOR
%A AZRIDJAL AZIZ
%A AKIO MIYARA
%A FUMIAKI SUGINO
%J Journal of Engineering Science and Technology
%D 2012
%I Taylor's University
%X The flow configuration and distribution behavior of two-phase flow in a distributor made of acrylic resin have been investigated experimentally. In this study, air and water were used as two-phase flow working fluids. The distributor consists of one inlet and two outlets, which are set as upper and lower, respectively. The flow visualization at the distributor was made by using a high¨Cspeed camera. The flow rates of air and water flowing out from the upper and lower outlet branches were measured. Effects of inclination angle of the distributor were investigated. By changing the inclination angle from vertical to horizontal, uneven distributions were also observed. The distribution of two-phase flow through distributor tends even flow distribution on the vertical position and tends uneven distribution on inclined and horizontal positions. It is shown that even distribution could be achieved at high superficial velocities of both air and water.
%K Two-phase flow
%K Distributor
%K Distribution
%K Visualization
%K Angle
%U http://jestec.taylors.edu.my/Vol%207%20Issue%201%20February%2012/Vol_7_1_041_055_AZRIDJAL%20AZIZ.pdf