%0 Journal Article
%T Photocatalytic decolorization of basic dye by TiO2 nanoparticle in photoreactor
%A Jutaporn Chanathaworn1
%A Charun Bunyakan1
%A Wisitsree Wiyaratn2
%A Juntima Chungsiriporn1
%J Songklanakarin Journal of Science and Technology
%D 2012
%I Songkla University
%X Photocatalytic decolorization of rhodamine B (RB) and malachite green (MG) basic dyes in aqueous solution wasevaluated using TiO2 powder as a semiconductor photocatalyst under UV black light irradiation. A 0.5 L batch photoreactorcontaining dyeing solution was installed in a stainless steel chamber with air cooling under irradiation. The TiO2 powder wascharacterized by XRD observation and it was shown that the nanoparticles could be identified as 73 nm anatase crystals. Theeffects of operational parameters such as light intensity (0-114 W/m2), initial dye concentration (10-30 mg/L), and TiO2 powderloading (0.5-1.5 g/L) on the decolorization of dye samples were examined. The photocatalytic decolorization rate depended onthe pollutant¡¯s structure, such that the MG dye could be removed faster than the RB dye. Decolorization efficiency (%) of thephotocatalytic system increased with increasing TiO2 loading and light intensity; however, it decreased with increasing initialdye concentration. A loading of 1.5 g TiO2/L, initial dye concentration of 20 mg/L, and light intensity of 114 W/m2 were foundto yield the highest removal efficiency of dye solution based on time requirement. The kinetics are of first order and dependon the TiO2 powder loading and dye structure. The research had a perfect application foreground.
%K photocatalytic
%K titanium dioxide
%K decolorization
%K uv light irradiation
%K photoreactor
%U http://rdo.psu.ac.th/sjstweb/journal/34-2/0125-3395-volume-203-210.pdf