%0 Journal Article
%T Bivariate return period based on copulas for hydrologic dam design: comparison of theoretical and empirical approach
%A A. I. Requena
%A L. Mediero
%A L. Garrote
%J Hydrology and Earth System Sciences Discussions
%D 2013
%I Copernicus Publications
%R 10.5194/hessd-10-557-2013
%X Hydrologic frequency analyses are usually focused on flood peaks. Multivariate analyses on flood variables have not been so exhaustively studied despite the fact that they are required to represent the full hydrograph, which is essential for designing some structures like dams. In this work, a bivariate copula model was used to obtain the bivariate joint distribution of flood peak and volume. An empirical bivariate return period was defined in terms of acceptable risk to the dam through the maximum water elevation reached during the routing process, in order to perform a risk assessment of dam overtopping. A Monte Carlo procedure was developed to compare the probability of occurrence of a flood with the return period linked to the risk of dam overtopping. The procedure is applied to the case study of the Santillana reservoir in Spain. A set of synthetic peak-volume pairs was generated by the fitted copula and synthetic hydrographs were routed through the reservoir. Different reservoir volumes and spillway lengths were considered. Hydrographs with the same risk were represented by a curve in the peak-volume space. These curves were compared to those linked to the probability of occurrence of a flood event, in order to improve the estimation of the Design Flood Hydrograph.
%U http://www.hydrol-earth-syst-sci-discuss.net/10/557/2013/hessd-10-557-2013.pdf