%0 Journal Article
%T Diagnosis parameters of mold filling pattern for optimization of a casting system
%A Jun-Ho Hong
%A Young-Sim Choi
%A Ho-Young Hwang
%J China Foundry
%D 2012
%I Foundry Journal Agency
%X For optimal design of a gating system, the setting of diagnosis parameters is very important. In this study, the permanent mold casting process was selected because most of the other casting processes have more complicated factors that influence the mold filling pattern compared to the permanent mold casting process, such as the surface roughness of mold, gas generation from the mold wash and binder of sand mold, and the gas permeability through a sand mold, etc. Two diagnosis parameters (flow rate difference and arrival time difference) of molten metal flow pattern in the numerical simulation are suggested for design of an optimum casting system with a permanent mold. The results show that the arrival time difference can be used as one important diagnosis parameter of the complexity of the runner system and its usefulness has been verified via making aluminum parts using permanent mold casting (Fig. 9).
%K mold filling pattern
%K optimum casting system
%K diagnosis parameter
%K permanent mold casting process
%U http://www.foundryworld.com/uploadfile/2012121055147157.pdf