%0 Journal Article
%T Transient Stability Improvement of a Power System with Parametric Uncertainties Using a Robust Optimal H2 State Feedback Controller
%A Mehdi Mohseni Mirabadi
%A Navid Reza Abjadi
%A Said Hoghoughi-Isfahani
%A Shahrokh Shojaeian
%J Chinese Journal of Engineering
%D 2014
%R 10.1155/2014/131680
%X In recent years, improvement of dynamic behavior of power systems has interested many researchers and to achieve it, various control methods are proposed. In this paper, in order to improve transient stability of power system, a robust optimal H2 state feedback is employed. In order to appropriate formulation of the problem, linear matrix inequality (LMI) theory is used. To achieve the best answer, controller parameters are tuned using particle swarm algorithm. The obtained results of the proposed method are compared to conventional power system stabilizer. 1. Introduction With the development of power grids, low-frequency oscillations appeared in power system. Small and sudden disturbances cause such oscillations. In more cases, these oscillations are damped rapidly and the amplitude of the oscillation is below a definite value, but, depending on the operating point conditions and system parameters values, these oscillations may become continuing for a long time and, in the worst case, their amplitudes are increased. The transient stability of the power system is an important factor in development of power grids. In [1], a robust controller is proposed for SVC control to improve the damping of synchronous machine oscillations. The obtained results in this work are compared to the ones from a conventional power system stabilizer (PSS). In [2], the effect of injected reactive power of STATCOM on grid voltage and the damping of synchronous machine oscillations are investigated. In [3], using fuzzy logic laws, a controller is designed for STATCOM and the improvement of power system transient stability is studied. In [4], to improve the transient stability, a UPFC is employed and two control methods are proposed. In this work, the effect of UPFC capacitance value on transient stability is investigated. There are various PSS structures, but conventional PSS is still interesting because of its simple structure and good flexibility and feasibility. However, the performance of conventional PSS is sensitive to operating point of the system which is changed by load variation; thus the conventional PSS may be failed or may lose its capability [5]. Most of the controllers proposed for this purpose need a perfect model of power system with good precision. It is worthwhile to note that the power system is a nonlinear coupled system. Most of the models used in controller design are a linear approximation around the operating point. Usually the design of the controller is based on the worst operating point and simply the damping torque is increased. With a change in
%U http://www.hindawi.com/journals/cje/2014/131680/