%0 Journal Article
%T Electrochemical and Oxidation Behavior of Yttria Stabilized Zirconia Coating on Zircaloy-4 Synthesized via Sol-Gel Process
%A S. Rezaee
%A Gh. R. Rashed
%A M. A. Golozar
%J International Journal of Corrosion
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/453835
%X Sol-gel 8£¿wt.% Yttria Stabilized Zirconia (YSZ) thin films were prepared on zirconium (zircaloy-4£¿alloy) by dip-coating technique followed by heat treating at various temperatures (200¡ãC, 400¡ãC, and 700¡ãC) in order to improve both electrochemical corrosion and high temperature oxidation properties of the substrate. Differential thermal analysis and thermogravimetric analysis (DTA-TG) revealed the coating formation process. X-ray diffraction (XRD) was used to determine the crystalline phase structure transformation. The morphological characterization of the coatings was carried out using scanning electron microscopy (SEM). The electrochemical behavior of the coated and uncoated samples was investigated by means of open circuit potential, Tafel, and electrochemical impedance spectroscopy (EIS) in a 3.5£¿wt.% NaCl solution. The homogeneity and surface appearance of coatings produced was affected by the heat treatment temperature. According to the corrosion parameters, the YSZ coatings showed a considerable increase in the corrosion resistance, especially at higher heat treatment temperatures. The coating with the best quality, from the surface and corrosion point of view, was subjected to oxidation test in air at 800¡ãC. The coated sample presented a 25% reduction in oxidation rate in comparison with bare substrate. 1. Introduction Because of many excellent bulk properties like low thermal neutron capture cross section, favorable mechanical properties and good corrosion resistance even at high temperatures, zirconium and its alloys are widely used in nuclear reactors as fuel cladding and as reactor structural elements, chemical engineering, and lately in biomedical applications. For fuel cladding applications, the alloys of choice are zircaloy-2 (Zr-2) and zircaloy-4 (Zr-4). In fuel deep geological repository, used fuel bundles and the associated Zr cladding are encapsulated in durable containers and the containers are sealed in an engineered vault at a depth of hundreds of meters in a stable low permeability rock mass. Ground water composition especially in crystalline and sedimentary rock types contains NaCl. In a failed container, zirconium is in contact with NaCl solution [1¨C4]. So, they are somehow subject to corrosion and their specific surface properties (e.g., corrosion, oxidation, etc.) should be improved [2, 4]. Surface modification of materials permits independent optimization of bulk and surface properties. Among all surface modification techniques such as chemical vapor deposition [5, 6], physical vapor deposition [7], plasma [8], ion
%U http://www.hindawi.com/journals/ijc/2013/453835/