%0 Journal Article
%T The Effects of Laser Marking and Symbol Etching on the Fatigue Life of Medical Devices
%A P. J. Ogrodnik
%A C. I. Moorcroft
%A P. Wardle
%J Journal of Medical Engineering
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/570354
%X This paper examines the question;¡° does permanent laser marking affect the mechanical performance of a metallic medical component?¡± The literature review revealed the surprising fact that very little has been presented or studied even though intuition suggests that its effect could be detrimental to a component's fatigue life. A brief investigation of laser marking suggests that defects greater than 25£¿¦Ìm are possible. A theoretical investigation further suggests that this is unlikely to cause issues with relation to fast fracture but is highly likely to cause fatigue life issues. An experimental investigation confirmed that laser marking reduced the fatigue life of a component. This combination of lines of evidence suggests, strongly, that positioning of laser marking is highly critical and should not be left to chance. It is further suggested that medical device designers, especially those related to orthopaedic implants, should consider the position of laser marking in the design process. They should ensure that it is in an area of low stress amplitude. They should also ensure that they investigate worst-case scenarios when considering the stress environment; this, however, may not be straightforward. 1. Introduction It is compulsory to have medical devices permanently marked. Commonly, this information is the part number for the component, the manufacturer¡¯s trademark, and the CE symbol (in Europe) and a lot number; to ensure legibility, the size of the lettering is further governed. This means that the positioning of the marking can be arbitrary and may be positioned purely because of available free space away from holes, changes in profile, and so forth. For metallic components, this marking is commonly produced using laser techniques. Most commonly, the laser is used to etch the surface of the component producing a defect whose surface finish is different from the rest of the body, hence making a discernible area. Controlling the position of the laser using CNC techniques can produce letters and graphics. The power and duration of the laser dictate the depth of the etching. The technical details [1] for a specific laser marking device (designed to minimize fatigue issues in safety critical components) state the following: ¡°Laser etching markers work by focusing energy directly on the surface to be marked. The heat generated by the beam actually alters the surface of the part or vaporizes surface material¡­ in other metals (than steel), the surface is etched when material is removed by high temperature vaporization¡­ it modifies the metal alloying
%U http://www.hindawi.com/journals/jme/2013/570354/