%0 Journal Article
%T ANALYZE THE THERMAL PROPERTIES BY VARYING GEOMETRY, MATERIAL AND THICKNESS OF CYLINDER FINS
%A THAMMALA PRAVEEN
%A Dr.P.SAMPATH RAO
%J International Journal of Mechanical Engineering & Technology (IJMET)
%P 95-118
%@ 0976 - 6359
%D 2016
%X The Engine cylinder is one of the major automobile components, which is subjected to high temperature variations and thermal stresses. In order to cool the cylinder, fins are provided on the cylinder to increase the rate of heat transfer. By doing thermal analysis on the engine cylinder fins, it is helpful to know the heat dissipation inside the cylinder. The principle implemented in this project is to increase the heat dissipation rate The parametric model is created by varying the geometry, rectangular, circular and curved shaped fins and also by varying thickness of the fins. The main aim is to analysis thermal properties by varying geometry, material and thickness of cylinder fins. Transient thermal analysis determines temperatures Heat flux, Thermal gradient and other thermal quantities that vary over time. The variation of temperature distribution over time is of interest in many applications such as in cooling. In this project we have taken rectangular, circular and curved fins of 3mm thickness, initially and reduce the thickness into 2.5mm done analysis on the point กฐ How the heat transfer changes by the reducing the thickness of the fin. The accurate thermal simulation could permit critical design parameters to be identified for improved life. The 3D modeling software used is Pro/Engineer. The analysis is done using ANSYS. Presently Material used for manufacturing cylinder fin body is Aluminum Alloy 204 which has thermal conductivity of 110- 150W/mk
%K Combustion Chamber
%K Cylinder Walls Aluminum Alloy
%K Modeling With Design Parameters
%K And Analysis In ANSYS
%U http://www.iaeme.com/MasterAdmin/UploadFolder/ANALYZE%20THE%20THERMAL%20PROPERTIES%20BY%20VARYING%20GEOMETRY%20MATERIAL%20AND%20THICKNESS%20OF%20CYLINDER%20FINS/ANALYZE%20THE%20THERMAL%20PROPERTIES%20BY%20VARYING%20GEOMETRY%20MATERIAL%20AND%20THICKNESS%20OF%20CYLINDER%20FINS.pdf