%0 Journal Article
%T Ice-Templating for the Elaboration of Oxygen Permeation Asymmetric Tubular Membrane with Radial Oriented Porosity
%J Ceramics | An Open Access Journal from MDPI
%D 2019
%R https://doi.org/10.3390/ceramics2020020
%X An original asymmetric tubular membrane for oxygen production applications was manufactured in a two-step process. A 3 mol% Y2O3 stabilized ZrO2 (3YSZ) porous tubular support was manufactured by the freeze-casting technique, offering a hierarchical and radial-oriented porosity of about 15 ¦Ìm in width, separated by fully densified walls of about 2 ¦Ìm thick, suggesting low pressure drop and boosted gas transport. The external surface of the support was successively dip-coated to get a Ce0.8Gd0.2O2£¿¦Ä ¨C 5mol%Co (CGO-Co) interlayer of 80 ¦Ìm in thickness and an outer dense layer of La0.6Sr0.4Co0.2Fe0.8O3£¿¦Ä (LSCF) with a thickness of 30 ¦Ìm. The whole tubular membrane presents both uniform geometric characteristics and microstructure all along its length. Chemical reactivity between each layer was studied by coupling X-Ray Diffraction (XRD) analysis and Energy Dispersive X-Ray spectroscopy (EDX) mapping at each step of the manufacturing process. Cation interdiffusion between different phases was discarded, confirming the compatibility of this tri-layer asymmetric ceramic membrane for oxygen production purposes. For the first time, a freeze-cast tubular membrane has been evaluated for oxygen permeation, exhibiting a value of 0.31 mL¡¤min£¿1¡¤cm£¿2 at 1000 ¡ãC under air and argon as feed and sweep gases, respectively. Finally, under the same conditions and increasing the oxygen partial pressure to get pure oxygen as feed, the oxygen permeation reached 1.07 mL¡¤min£¿1¡¤cm£¿2. View Full-Tex
%U https://www.mdpi.com/2571-6131/2/2/20