%0 Journal Article
%T Influence of Plastic and Coconut Shell (Cocos <i>nucifera L.</i>) on the Physico-Mechanical Properties of the 8/6 Composite Rafter
%A Fofana Messorma Souleymane
%A Jolissaint Obre Sery Paul
%A Emeruwa Edjik¨¦m¨¦
%A Yomanfo Assoumou Joseph
%J Open Journal of Composite Materials
%P 57-68
%@ 2164-5655
%D 2023
%I Scientific Research Publishing
%R 10.4236/ojcm.2023.134005
%X In this paper, the authors aim to propose the use of waste plastics as a binder in a coconut shell reinforcement for the development of an 8/6 size composite rafter to replace the natural 8/6 size backbone in construction. Following a study into the choice of the best proportions, a total of 30 size 8/6 composite rafters with different proportions of 20%, 25%, 30%, 35%, 40% and 50% plastic content were developed. All the 8/6 composite rafters were subjected to mechanical (3-point bending strength and Monnin hardness) and physical (bulk density and water absorption) characterization analyses. The results show that flexural strength increases from 27.56 MPa to 33.30 MPa for proportions ranging from 20% to 35% plastic content. Above 35% plastic, the strength drops to 19.60 MPa for a 50% plastic content. Similarly, the Monnin hardness drops from 9 mm to 5 mm when the plastic content varies from 20 to 50%. As for the results of the physical characterisation, the values obtained for apparent density vary from 0.89 to 1 for proportions varying from 20% to 35% plastic content and drop to 0.94 for 50% plastic content. As for water absorption, values drop from 6.82% to 2.45% when the plastic content increases from 20% to 50%. These mechanical strengths stabilise at 35% plastic content. The development of an 8/6 chevron composite material based on plastic and coconut shell could therefore be a way of recovering waste and solving the problem of deforestation.
%K Plastic Waste
%K Coconut Shell
%K Recovery
%K Mechanical and Physical Properties
%K 8/6 Composite Chevron
%U http://www.scirp.org/journal/PaperInformation.aspx?PaperID=127262