%0 Journal Article
%T Study on the Attack of Molten Silicates on Plasma-Sprayed Thermal Barrier Coatings
%A Roberto Fernando Martins
%A Karl Friehe
%A Cec¨Ēlia Chaves Guedes e Silva
%A Dolores Ribeiro Ricci Lazar
%A Ant&#244
%A nio Augusto Couto
%A Carlos Roberto Camello Lima
%J Journal of Minerals and Materials Characterization and Engineering
%P 115-130
%@ 2327-4085
%D 2023
%I Scientific Research Publishing
%R 10.4236/jmmce.2023.115010
%X Thermal barrier coating (TBC) revolutionized the industry by allowing higher operating temperatures for equipment, such as gas turbines in the aeronautical industry. However, at high temperatures, the TBC is exposed to the attack of molten silicates, known as CMAS (Calcium-Magnesium-Alumino-Silicate), which are particles from the environment that infiltrate the TBC, causing delamination. In this study, samples coated with TBC by thermal spray and covered with CMAS were evaluated at temperatures of 1200<span style=\"white-space:nowrap;\">&amp;#730;</span>C and 1250<span style=\"white-space:nowrap;\">&amp;#730;</span>C. For each temperature, exposure times of 1 h and 5 h were used. Samples with longer exposure time had a considerable volume increase. The main contribution of this work was to demonstrate the non-wettability of the CMAS, even in the 5-h heat treatments, which prevented its infiltration in the deeper regions. The conditions to guarantee the formation of the silicate and its consequent wettability are also discussed.
%K Thermal Barrier Coatings
%K Molten Silicates
%K Thermal Spray
%U http://www.scirp.org/journal/PaperInformation.aspx?PaperID=127478