%0 Journal Article
%T 基于ANSYS的轴承座建模与仿真分析<br>Modeling and Simulation Analysis of Bearing Housing Based on ANSYS
%A 崔晓晴
%J Modeling and Simulation
%P 336-346
%@ 2324-870X
%D 2024
%I Hans Publishing
%R 10.12677/MOS.2024.131032
%X 轴承座是一种重要的机械元件，用于支撑和定位轴承，承受轴承载荷并传递给底座或机身结构。首先，本文利用SolidWorks建立轴承座的三维模型；然后，将模型导入ANSYS Workbench对其进行网格划分、载荷施加以及边界条件施加等，对轴承座进行有限元分析，主要包括静力分析、模态分析和谐响应分析。最后，分析研究轴承座的振动和位移特性，评估本轴承座的稳定性并进行结构优化。<br />
Bearing housing is an important mechanical element, which is used to support and locate the bear-ing, bear the bearing load and transfer it to the base or body structure. First of all, this paper uses SolidWorks to establish a three-dimensional model of the bearing housing; then, the model is im-ported into ANSYS Workbench for meshing, load application, and boundary condition application, etc., and finite element analysis is performed on the bearing housing, which includes static analysis, modal analysis, and harmonic response analysis. Finally, the vibration and displacement character-istics of the housing are analyzed and studied to evaluate the stability of the housing and optimize the structure.
%K 轴承座，有限元分析，ANSYS Workbench<br>Bearing Housing
%K Finite Element Analysis
%K ANSYS Workbench
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=79244