%0 Journal Article
%T X气田天然气处理厂注油融蜡工艺优化
Optimization of Oil Injection and Wax Melting Process in X Gas Field Natural Gas Treatment Plant
%A 易思静
%A 曹彧维
%A 赵菲菲
%A 代章涛
%A 李瀚翔
%J Mine Engineering
%P 60-70
%@ 2329-731X
%D 2024
%I Hans Publishing
%R 10.12677/ME.2024.121008
%X X气田天然气处理厂采用低温冷冻工艺处理天然气,含蜡组分的天然气在低温条件下极易析出蜡结晶,蜡结晶附着在低温分离器及J-T阀处造成堵塞,从而大大降低处理厂处理效率,增加处理成本。本文基于X气田天然气处理厂实际运行参数,用仿真模拟软件还原现场工艺流程,从凝析油油品、凝析油注入量、凝析油循环利用等方面开展融蜡效果研究,研究结果可为X气田天然气处理厂注油融蜡工艺参数优化提供决策参考。
Low temperature freezing process is used to treat natural gas in the natural gas treatment plant of X gas field. The natural gas containing wax components is easy to precipitate wax crystallization under low temperature conditions, and the wax crystallization adheres to the low temperature sep-arator and J-T valve to cause blockage, which greatly reduces the treatment efficiency of the treat-ment plant and increases the treatment cost. Based on the actual operating parameters of the nat-ural gas treatment plant in X gas field, this paper uses simulation software to restore the on-site process flow, and studies the wax melting effect from the aspects of condensate oil, condensate oil injection and condensate oil recycling. The research results can provide decision-making reference for the optimization of oil injection and wax melting process parameters in the natural gas treat-ment plant of X gas field.
%K 天然气处理厂,注油融蜡,参数优化
Natural Gas Treatment Plant
%K Oil Injection and Wax Melting
%K Parameter Optimization
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=79825