%0 Journal Article
%T Optimization and Characterization of Cellulose Extraction from <i>Grevillea</i> <i>robusta</i> (Silky Oak) Leaves by Soda-Anthraquinone Pulping Using Response Surface Methodology
%A Catherine N. Muya
%A John M. Onyari
%A Lydia W. Njenga
%A Joab O. Onyango
%A Wilson M. Gitari
%J Green and Sustainable Chemistry
%P 43-65
%@ 2160-696X
%D 2024
%I Scientific Research Publishing
%R 10.4236/gsc.2024.143004
%X Response surface methodology (RSM) using the central composite design (CCD) was applied to examine the impact of soda-anthraquinone pulping conditions on <i>Grevillea</i> <i>robusta</i> fall leaves. The pulping factors studied were: NaOH charge 5% to 20% w/v, pulping time 30 to 180 minutes, and the anthraquinone charge 0.1 to 0.5% w/w based on the oven-dried leaves. The responses evaluated were the pulp yield, cellulose content, and the degree of delignification. Various regression models were used to evaluate the effects of varying the pulping conditions. The optimum conditions attained were; NaOH charge of 14.63%, 0.1% anthraquinone, and a pulping period of 154 minutes, corresponding to 20.68% pulp yield, 80.56% cellulose content, and 70.34% lignin removal. Analysis of variance (ANOVA), was used to determine the most important variables that improve the extraction process of cellulose. The experiment outcomes matched those predicted by the model (Predicted R<sup>2</sup> = 0.9980, Adjusted R<sup>2</sup> = 0.9994), demonstrating the adequacy of the model used. FTIR analysis confirmed the elimination of the non-cellulosic fiber constituents. The lignin and hemicellulose-related bands (around 1514 cm<sup>&#8722;</sup><sup>1</sup>, 1604 cm<sup>&#8722;</sup><sup>1</sup>, 1239 cm<sup>&#8722;</sup><sup>1</sup>, and 1734 cm<sup>&#8722;</sup><sup>1</sup>) decreased with chemical treatment, indicating effective cellulose extraction by the soda-anthraquinone method. Similar results were obtained by XRD, SEM and thermogravimetric analysis of the extracted cellulose. Therefore, <i>Grevillea</i> <i>robusta</i> fall leaves are suitable renewable, cost-effective, and environmentally friendly non-wood biomass for cellulose extraction.
%K Cellulose Extraction
%K Response Surface Methodology
%K Central Composite Design
%K Delignification
%U http://www.scirp.org/journal/PaperInformation.aspx?PaperID=134345