全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

为什么选择我们？ >>
- 开源期刊
- 同行审议
- 快速出刊
- 终身存储
- 免费检索
- 免费推广
- 更多...
- 搜索引擎

Mechanical Engineering and Technology

ISSN Print: 2167-6631

ISSN Online: 2167-6623

主页: http://www.hanspub.org/journal/met

分享:




Go

基于特征工件的五轴数控机床动静态误差辨识与分离方法
Dynamic and Static Error Identification and Separation Method for Five-Axis CNC Machine Tools Based on Feature Workpiece

梁喆程, 刘超

面向皮带撕裂视觉检测的输送机皮带减振研究
Research on Vibration Reduction of Conveyor Belt for Visual Detection of Belt Tears

曾小信, 贾晓斌, 李旭东, 罗柏文, 廖婷婷

高精度封帽机的视觉识别对位方法
High-Precision Alignment Structure Design of the Fully Automated Cap Sealer

王鹏程, 刘峰, 马轶博, 陈振亚

FDM 3D打印工艺对轻质蜂巢结构机械性能的影响
The Influence of FDM 3D Printing Process on the Mechanical Properties of Lightweight Honeycomb Structure

韩定坤

基于分区布置的卷烟生产车间风力送丝管道系统设计
Wind Pipe for Wire Feeding in Cigarette Production Workshop Based on Zoning Arrangement System Design

方海郦, 张琴, 张明伟

基于单片机的智能定时开关设计与仿真研究
Origami-Based Single-Chip Microcomputer: Intelligent Timing Switch Design

周颖菲, 黄资瀚, 邹芝怡, 杨怡恒, 王廷军, 邹旭

一种获取重型矿用自卸车油气悬缸参数的试验方法
An Experiment Method to Obtain Parameters of Hydro-Pneumatic Suspension of a Heavy Mining Dumper

刘迪辉, 许逸驰, 徐子寰, 赵明成, 李立山, 穆岩岩

7系列高强度铝合金铆钉结构优化试验研究
Experimental Study on the Structure Optimization of 7 Series High Strength Aluminum Alloy Rivet

王洋, 刘娅婷, 刘召鑫, 李建冬, 刘双蕾, 张兆

自走式四轮植保机转向系统结构设计与研究
Structural Design and Research on Steering System of Self-Propelled Four-Wheel Plant Protection Machinery

张泉, 李国慧, 黄清, 李博

汽车座椅H点测量不确定度分析
Uncertainty Analysis of the Car Seat H-Point

易成亮, 郁呈祥, 甄凯, 廖聪, 成骅志

光照处理后织带抗拉强度影响的研究
The Research of the Webbing Tensile Strength Influence after Light Treatment

崔恩有, 易成亮, 甄凯, 廖聪, 成骅志

基于ROC分析及样本熵的轴承故障检测
Bearing Fault Detection Based on ROC Analysis and Sample Entropy

朱鸿斌, 徐维超, 吴海平

基于点云数据的干涉分析在仪器支架自动化装配中的应用
Application of Interference Analysis Based on Point Cloud Data in Automated Assembly of Instrument Supports

李耀阳, 于炳涛, 高亮, 吴昊月, 白建炜, 李志坚

基于ANSYS的直齿轮啮合有限元分析
Finite Element Analysis of Spur Gear Meshing Based on ANSYS

刘文君, 徐旭松, 耿浩然, 薛耀阳, 马家亮

基于制动软管新国标的膨胀量自动测试平台设计
Design of Automatic Expansion Test Platform Based on New National Standard of Brake Hose

李松, 李广宇, 邓德军, 李旭伟

可视化小角度微调技术研究
Research on Visual Small Angle Fine Adjustment Technology

初文朝, 张菊绒, 颉运佳

油路积碳清洗剂对小排量发动机经济性影响的试验研究
Experimental Study on the Influence of Oil Carbon Deposition Cleaning Agents on the Economy of Small Displacement Engines

龚击, 梁巍, 卢柳青, 范毅

垂直轴风力发电机力学性能研究综述
A Review of Research on the Mechanical Performance of Vertical Axis Wind Turbines

张涵, 唐清春, 黄健友

齿轮泵困油优化的研究进展
Research Progress on Optimization of Trapped Oil in Gear Pumps

李建华, 韦建军, 周知进, 冷晓峰, 余学书

汽车车轮检测技术发展概述
An Overview of the Evolution of Automobile Wheel Inspection Technologies

常茂林, 王晗

RP-3航空煤油裂解台架搭建及实验分析
RP-3 Aviation Kerosene Cracking Bench Construction and Experimental Analysis

钟涛, 郑东

基于正负压循环试验的汽车燃油箱结构强度分析
Structural Strength Analysis of Automobile Fuel Tanks Based on Positive and Negative Pressure Cycle Tests

郑忠辉, 刘晓东, 邓德军

生物滤波器的等效电路模型
Equivalent Circuit Model of Biofilter

赵玉平, 宋宏伟, 仇惠婷

软包锂离子电池热失控多维特征参数演变研究
Study on Multi-Dimensional Characteristic Parameters Evolution of the Pouch-Type Lithium-Ion Battery Thermal Runaway

吕敏, 黄燕

新型高速五轴联动加工中心立柱结构优化设计
Structure Optimization Design of New Five-Axis High Speed CNC Machine Column

杨凡

声学黑洞耦合动力吸振器复合梁振动特性研究
Vibration Properties Investigation of an Acoustic Black Hole Beam with Dynamic Vibration Absorber

邓风帆, 贾秀娴, 于野, 华春蓉, 解元伟

调距桨在800 kW拖船全回转导管桨上的应用研究
Research on the Application of Controllable-Pitch Propeller in 800 kW Tugboat’s Rudder Ducted Propeller

高用亮, 黄朝彬, 韩波

轴向柱塞泵可靠性测定试验回路设计与可靠性分析
Design and Reliability Analysis of Axial Piston Pump Reliability Test Loop

吕洪磊

基于QFD、TRIZ和FMEA的送夹料装置创新设计
Innovation Design of Feed Clamp Device by Integrating QFD, TRIZ, and FMEA

周建行, 王起, 方建军, 徐佳, 顾怡红

地铁车辆永磁直驱转向架悬挂参数优化及分析
Suspension Parameter Optimization and Analysis of Permanent Magnet Direct Drive Bogie for Metro Vehicle

付康, 韩正军, 王顺强

双入口旋风分离器速度流场及分离效率数值模拟研究
Numerical Simulation Study on Velocity Flow Field and Separation Efficiency of Double Inlet Cyclone Separator

马翎凯, 刘旭辉

基于ROS的双机械臂协同感知抓取系统设计与实现
Design and Realization of ROS-Based Dual Robotic Arm Cooperative Sensing and Grasping System

赵源麒, 王清珍

基于制造数据驱动的质量波动溯源分析研究
Research on Quality Fluctuation Traceability Analysis Based on Manufacturing Data Driven

崔惠桢, 姚迪, 许金国, 梁立鹏, 云飞扬

中药配方颗粒汇集装置数值模拟与试验研究
Numerical Simulation and Experimental Research on the Collection Device for Traditional Chinese Medicine Formula Particles

赵明, 芦金石, 冯怡然, 崔任栋, 吴昊天, 王硕

双主轴数控机床工作台动静强度分析
Dynamic and Static Strength Analysis of Double Spindle CNC Machine Tool Worktable

姜欣怡, 杨郡守, 林晓亮, 汪志能, 余良斌, 吴弘毅

柔性送料方式下的管件旋锻缩径工艺研究
Study on Rotary Forging and Diameter Shrinkage Process of Pipe Fittings under Flexible Feeding Mode

邬思军, 刘志卫, 王干

推土机整机噪声控制及应对措施
Noise Control and Countermeasures of Bulldozers

闫滕滕, 李楠国

140 MPa压裂管汇四通管道冲蚀模拟
Erosion Simulation of 140 MPa Fracturing Manifold Four-Way Pipeline

刘洋

旋流气浮装置流场分析及分离效率数值研究
Flow Field Analysis and Numerical Study on Separation Efficiency of Cyclone Air Flotation Device

何燚诚, 何燚锴, 王长建

防喷器拆卸装置的设计
Design of Disassembly Device for Spray Preventer

李灿霞, 王长建

基于北斗定位优化的太阳能发电和水循环储热系统设计
Design of Solar Power Generation and Water Cycle Heat Storage System Based on Beidou Positioning Optimization

曹建新, 向进, 叶鑫, 吴思慧, 王莹莹, 韩崇

含有初始弯曲柔性梁的四杆机构轨迹分析
Trajectory Analysis of a Four-Bar Mechanism with an Initially Curved Flexible Beam

李渊

基于改进U2-Net的指针式仪表读数方法
Reading Method of Pointer Instrument Based on Improved U2-Net

王奇, 李莉, 王震, 王树云

机械行业数字孪生技术发展趋势分析
Analysis of the Developing Trend of Digital Twin Technology in the Machinery Industry

张宁

软包电池高温自燃实验系统的设计搭建及实验分析
Design and Construction of a High-Temperature Combustion Experimental System for Flexible Pack Battery and Analysis

朱文慧, 钟成, 林童, 郑东

钢轨三维擦伤状态对波磨发展的影响研究
Investigation into the Effect of 3D Rail Squat on Rail Corruguation

吴彦龙, 崔大宾

舵机液压泵站失效分析与改进修理
Failure Analysis and Improvement Repair of Steering Gear Hydraulic Pump Station

高用亮, 韩波

电子机械制动器的建模仿真
Modeling and Simulation of Electronic Mechanical Brakes

芦杰, 孙奎洲

移动场景下隔振平台的设计与性能优化研究
Research on the Design and Performance Optimization of Vibration Isolation Platforms in Mobile Scenarios

许江涛, 袁良好, 余东耀, 罗嘉怡, 袁雨潇, 周子璇

梳齿式滤袋折叠机设计与参数优化试验
Design and Parameter Optimization Test of Comb-Type Filter Bag Folding Machine

向瞿烩, 刘星亮, 鲁灵捷, 迟德霞, 钟小烨, 杜沛松, 关甄宇

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705