全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

为什么选择我们？ >>
- 开源期刊
- 同行审议
- 快速出刊
- 终身存储
- 免费检索
- 免费推广
- 更多...
- 搜索引擎

Journal of Textile Science and Technology

ISSN Print: 2379-1543

ISSN Online: 2379-1551

主页: http://www.scirp.org/journal/JTST

分享:




Go

A Comparative Study of 3D Virtual Pattern and Traditional Pattern Making

Md. Ahshan Habib, Md. Shamsul Alam

Epiphanic Revival: Exploring Metallic Finishes on Batik Fabrics in Ghana

Sumaila Mohammed Sumaila, Kweku Safo-Ankama, Joshua Anim

The Use of Smart Textiles in the Healthcare Space: Towards an Improvement of the User-Patient Experience

Balkis Ellouze, Marwa Damak

Predicting the Stitch Density of Finished Fabrics Using Weft Blended Grey Knit Fabrics

Kazi Md. Elias, Mohammad Obaidur Rahman, H. M. Zakir Hossain

Evolution of Handicraft Industries in the Textile Sector in Saudi Arabia: A Comprehensive Analysis of Trends and Innovations

Mona A. Alfawaz

Influence of Solvent onto Chemical Extraction of America-Type Coconut (Coco nucifera L.) Fbers: Analysis of Physicochemical, Mechanical and Morphological Properties

Delphine Korgai Gandai, Zara Haman, Djoda Pagore Frederic, Memtine Ndong Augustin, Abdourhamane Nsangou, Niraka Blaise, Hambate Gomdje Valery

A Comprehensive Study on the Effects of Stone Enzyme Wash on Different Thickness Cotton Denim Pants

Md. Monirul Islam (Rajib), Abu Yousuf Al Sadiqzzaman Rafin, Farhana Yeasmin Marufa, Sakib Salim, Md. Arabin Pasha

Clothing Sales Forecast Considering Weather Information: An Empirical Study in Brick-and-Mortar Stores by Machine-Learning

Jieni Lv, Shuguang Han, Jueliang Hu

Comparative Study on the Acid-Base Indicator Properties of Natural Dye, Turmeric Rhizome (Curcuma longa) and Synthetic Dyes

Genevive Chinyere Onuegbu, Onyekachi Onyinyechi Nnorom, Gerald Okwuchi Onyedika

Effects Optimization of Bio-Polishing Industrial Process Parameters

Imed Ben Marzoug, Rim Cheriaa

Inspiration and Innovative Approach in Creating Textile Designs and Prints from Sekondi-Takoradi’s Masquerade Costume Designs

Kweku Safo-Ankama, Joshua Anim, Sumaila Mohammed Sumaila

The Influence of Fabric Structural Parameters on Dust Retention Using a Simple, Newly Constructed Device

Samia B. Hassan, Mohamed A. Saad

Minimization of Air Consumption and Potential Savings of Textile Denim Fabric Manufacturing Process

Md. Enamul Haque, Md. Bokthier Rahman, Waliul Kafi, Md. Suja Uddin Kaiser, Abhijit Dey

Achieve Intended Learning Outcomes and Improving Digital Literacy Skills for Practical-Based Subjects Using Online Teaching via Propagation of OER Materials

Ka Man Mok, Prabrisha Sarkar, Shui Wing Ng, Sumit Mandal, Qing Chen, Manas Kumar Sarkar

Inventory of the Thermo-Physiological Behavior of Fabrics—A Review

Nicole M？lders

Complete Garment Costing with Major Cost Breakdown

Md. Monirul Islam Rajib, Md. Mehedi Hasan Parvez, Md. Shofiul Islam, Tanveer Ahmed, Md. Rashedul Islam

Optimization of Finishing Process and Energy Savings in Denim Textile Facility

Md. Enamul Haque, Kaisul Kabir, Md. Asib Khan, Mohammad Abu Syed Nizami, Rajib Kabiraj, Mohammed Fakhruddin, Md. Golam Arif, Md. Abu Hanif

Preparation and Investigation of Mechanical and Physical Properties of Flax/Glass Fabric Reinforced Polymer Hybrid Composites

Sayed Hasan Mahmud, Md. Washim Akram, Md. Fuad Ahmed, Md. Atik Bin Habib

An Overview of 3D Thin Shell Textile Preforms

Mohammad Toufiqul Hoque

Study on Licker-In and Flat Speeds of Carding Machine and Its Effects on Quality of Cotton Spinning Process

Md. Mominul Motin, Ayub Nabi Khan, Md. Obaidur Rahman

Effects of O3 Treatment on Different Composition % (Cotton, Polyester, Elastane) of Denim Fabrication (GSM 295, 327, 340, 343, 357, 360, 413) after Random O3 Wash

Engr. Md. Eanamul Haque Nizam, Mazharul Islam, Md. Tariqur Rahman Bhuya Tanvir, Monir Hossain, Bahar Mia, Ashraful Islam

Studying the Effect of Polyester Fiber Blend Ratio and Pilling Cycle on Blended Knit Fabrics

Kazi Md. Elias, Mohammad Obaidur Rahman, H. M. Zakir Hossain

Manufacture of Single Cotton Fabric with New Composition, Specified Bend from Yarn Gathered from Local Raw Material Cotton Fiber

Dilshodbek Olimjonov Khasanboy Ugli, Mirxojayev Mirjamol Mirkarimovich

Micro Seasonal Fashion Impact in RMG Industry of Bangladesh

Mohammed Shamsul Alam, Md. Ahshan Habib, Nabinur Rahman, Adnan Arifin Himel, Md. Yeasin Ullah Resvy, Mohammad Mainul Hasan

Study on the Presence of Filament Yarn in Jamdani Saree in Bangladesh

Engr. Mohammed Rubaiyat Chowdhury, Engr. Ayub Nabi Khan, Rahat Hossain

Predicting Bursting Strength Behavior of Weft Knitted Fabrics Using Various Percentages of Cotton, Polyester, and Spandex Fibers

Kazi Md. Elias, Mohammad Obaidur Rahman, H. M. Zakir Hossain

Effect of Cellulose Enzymes on Some Properties of Fibre Clothes

Abeer Ebraheem El-Dsoky Mohmed Shalaby

Mitigating Risks in Inappropriate Handling of Chemicals by Small-Scale Textile Producers in Sekondi-Takoradi, Ghana

Eric Bruce-Amartey Jnr., Richard Acquaye

Impact of Stone Enzyme Wash and Acid Wash Based on Denim Garments

Tahmina Jahan, Jahid Khan

Investigation of Warp and Weft Knitted Fabric Acoustic Structures Derived from Garment Waste

Alhayat Getu Temesgen, Omprakash Sahu

Effect of Changing Front Top Roller Pressure of Drafting Zone of a Ring Frame on the Quality of Cotton-Flax Blended Yarn

Md. Masum Reza, Mohammad Nayemul Islam, Sharif Ahmed, Mohammad Naim Hassan

Study on Recycling Garments Wastage as an Alternative Sizing Material

Moin Uddin, Jabed Hossen Emon, Jonaetul Kibria Niloy

Techniques of the Smart Textile Utilization as Soilless Board in Vertical Cultivation

El-Sayed Sehsah, El Sayed El Nashar

Comparative Analysis of Technical Parameters of Different Knitted Structures (Jersey, Pique and Lacoste) with or without Lycra/Spandex

Faridul Islam Ovi, Rownak Jahan Shova

Dyeing Thermodynamics and Supramolecular Structure of Lac Red on Protein Fibers

Kewen Fu, Jian Li, Dongkai Qin, Luwei Shi, Xiangyu Ni, Kaikai Zhao, Dequan Xu, Ailin Yuan, Chunling Zheng

Harnessing Microalgae Biomass from Lake Taihu as a Natural Biocolorant Source for Sustainable Eco-Friendly Dyeing of Cotton with Ultrasonication

Jakpa Wizi, Lixiao Ni, Cunhao Du, Benjamin Kwablah Asinyo, Ebenezer Kofi Howard, Charles Frimpong

Technological Innovation: An Assessment of Operational Practices of Small and Medium Textile Enterprises in Ghana

Isaac Abraham, Ebenezer Kofi Howard, Richard Acquaye

Socio-Cultural Challenges of Small and Medium-Scale Batik and Tie-Dye Industry in Ghana

Kow Eduam Ghartey, Eric Bruce-Amartey Jnr., Richard Acquaye

Sustainable Denim Washing by Process Optimization

Md. Abu Bakar Siddiquee, A. T. M. Gulam Moula, Joy Krisna Saha, Md. Humayun Kabir Khan, Zihan Kaisar, Abhijit Roy

The Effect of Consumption on the Appearance of Closers Implemented by 3D Printer Technology (FDM)

Sanaa Abdullah Alsiyami, Shadia Salah Salem

Influence of Lycra Content and Stitch Length on the Dimensional and Physical Characteristics of Lycra Back Plaited Cotton (LBPC) Single Jersey Fabrics

Md. Razib Sheikh, Md. Kawsar Hossain, Mohammad Mahmudur Rahman Khan

Comparison between Tencel-Flax Blended Slub Yarn and Cotton-Flax Blended Slub Yarn

Mohammad Nayemul Islam, Lamia Latifun Rahman, Md. Imran Hosen, Jaglul Hoque Mridha, Md. Sakib-Uz-Zaman, Md. Shahin Hossen, Nazmus Sakib Khan

RETRACTED: Producing Spinnable Regenerated Cellulosic Fibers from Palm Fibers for Use in the Textile Industry

Shahad Ibrahim Omar Badr

Developing Denim Like Wash Effect on Corduroy Garments and Investigation of Different Physical Properties of Washed Corduroy Garments

Gazi Farhan Ishraque Toki, Akash Banik, Taosif Ahmed, Rony Mia, Rezaul Karim Khan Alave, Jarin Jahan, Md. Mostafizur Rahman Palash, Md. Salman Farsee

Novelties Filtration Theory of Liquid Chromatography-Mass Spectrometry in Volume Nanotube of Cotton Filament of Layers Woven Fabrics

ElSayed A. ElNashar

Analysis of Cotton Yarn Properties Spun on Aerodynamic Compact and Open-End Rotor Spinning

Md. Rafiqul Islam, Suza Ahmed, Md. Abubakar Siddik, Sadik M. Ashique

Redesign of Functional Kaba (Blouse) Apparel for Ghanaian Breastfeeding Mothers

Rowena Fatchu Kansanba, Vincentia Okpattah, Mercy Ampofowah Osei, Solomon Marfo Ayesu, Abraham Ekow Asmah

Impact of the Presence of the Loop at Different Location on Fabric Width and Areal Density of a Weft Knitted Structure

Zubair Bin Sayed, Nusrat Jahan, Shabrina Kabir

Impact of the Speed of Flat of a Typical Carding Machine on the Quality of Carded Sliver and 40 Ne Yarn

Zubair Bin Sayed, Naba Afrose, Shabrina Kabir

Preparation and Characterization of the Electrospun Alginate Nanofibers

Mohammad Forhad Hossain, Mustafijur Rahman

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705