全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用：99美元
投递稿件

为什么选择我们？ >>
- 开源期刊
- 同行审议
- 快速出刊
- 终身存储
- 免费检索
- 免费推广
- 更多...
- 搜索引擎

粉末冶金技术

ISSN Print: 1001-3784

ISSN Online:

主页: http://fmyj.cbpt.cnki.net/WKE/WebPublication/wkTextContent.aspx?colType=4&tp=gklb&mid=fmyj

分享:




Go

环缝气流冲击雾化制粉喷嘴流场特性的仿真研究 Simulation research on flow field characteristics of atomizing nozzle by circular seam air impact

马海英,张鹏,郭志军

CoO对菱镁矿制备镁砂性能的影响 Effect of CoO addition on the preparation of magnesia by magnesite

张汪年,王利,邓宁,袁志文,郑彬,王琪

超细金属粉末注射成形在聚变装置钨零部件中的应用 Application of ultrafine metal powder injection moulding on tungsten components in fusion devices

蒋香草

机械球磨技术在材料制备中的应用 Application of mechanical ball-milling technology in material preparation

张桂银,查五生,陈秀丽,严峻

锆-2合金粉末制备新工艺研究 Study on the new preparation technology of Zr-2 alloy powder

杜沛南,姚力夫,李传锋,尹昌耕

Fe–Mo–(Ni/Cu)–石墨粉末冶金复合材料的制备及组织性能研究 Research on microstructure and properties of Fe–Mo–(Ni/Cu)–graphite composite prepared by powder metallurgy technology

刘富,江晓婧,郑盼,商剑

铁基粉末流动温压工艺中热脱脂动力学分析 Analysis on thermal debinding kinetics of iron-based powders by warm flow compaction

杨义,倪东惠

溶胶–凝胶法制备核级ZrB_2粉体 Preparation of nuclear-grade ZrB_2 powders by sol–gel method

喻冲,杨静,张良,李圆圆,潘小强

镁基六铝酸镧喷涂粉末制备及其热处理工艺研究 Study on preparation and heat treatment process of LaMgAl_(11)O_(19) spray powder

何明涛,孟惠民,王宇超,任鹏伟

磁流变抛光液的研制、表征及使用 Development,characterization,and verification of magnetorheological polishing fluids

戴斌,姜平,周根荣,喻志刚,高海洋

有序排布金刚石锯片的制备与磨粒磨损形态研究 Preparation and abrasive wear characteristics of orderly arrayed diamond saw blades

王健,张凤林,牛亮,周玉梅

TiO_2柱撑石墨烯复合材料的制备及光催化性能 Synthesis and enhanced photocatalytic activity of TiO_2 pillared graphene nanocomposites

曾雄丰,王梦幻,路彦丽,张文丽,陈朗

石墨烯化学镀铜及其对石墨烯/铜基复合材料组织性能的影响 Study of electroless plating Cu by reduced graphene oxide and the effects on the microstructures and properties of RGO/Cu composites

魏邦争,陈闻超,朱曦,陈鹏起,程继贵

冷模压制Ti-6Al-4V粉末的修正Drucker-Prager Cap本构模型 Modified Drucker–Prager Cap model of Ti–6Al–4V powders for cold die compaction

孙世民,黄尚宇,周梦成,雷雨,王斌

金属粉末冲击压制过程中冲模质量及颗粒模型的优化分析 Optimization analysis of die mass and particle model in metal powder impact compaction

林立,刘军,周纯,胡海烽

生物医用Ti6Al4V合金粉末注射成形工艺研究 Research on powder injection molding of Ti6Al4V alloys for biomedical application

刘超,孔祥吉,吴胜文,况春江

铁锰无磁合金粉的水雾化法生产工艺研究 Research on production technology of nonmagnetic Fe-Mn alloy powders by water atomization

高莹,顾毅,吴艺辉,李辉,马春生,赵全,李丹

氧化石墨烯复合材料的制备及对铜离子吸附性能的研究 Preparation of graphene oxide composites and study on adsorption properties of copper ions

张建民,王晶,张继,李红玑

热变形对FGH96高温合金原始颗粒边界的影响 Effect of thermal deformation on prior particle boundary of FGH96 superalloy

傅豪,王梦雅,纪箴,田高峰,秦恬,贾成厂

合金元素铜对粉末冶金表面滚压致密化效果的影响 Effect of Cu alloy element on the performance of powder metallurgy surface rolling densification

丁霞,彭景光

铜基高通量换热管内多孔层的制备及性能研究 Preparation and properties of porous layer in copper based high flux heat transfer tube

赵洋,任淑彬,王凤林,曲选辉

镀钨碳纳米管增强镁基复合材料的摩擦磨损性能研究 Friction and wear properties of magnesium matrix composites reinforced by tungsten-coated carbon nanotubes

吴琼,贾成厂,聂俊辉

三种改性Hummers法对氧化石墨的结构和亚甲基蓝吸附性能影响 Influence on the structure and methylene blue adsorption of graphite oxide prepared by three modified Hummers methods

张建民,王阿宁,李红玑,王改平,段红星,武帅天

钛对铝基结合剂金刚石节块把持力的影响 Effect of Ti on the holding force of Al-based bonded diamond bits

肖长江,窦志强,栗正新

锌阳极的微观组织和腐蚀失效分析 Microstructures and corrosion failure analysis of zinc anode

王琰,郭淳,孔德成,赵振江,王力,董超芳

惰性熔融红外吸收/热导法测定TiCN原料粉末中氧和氮 Determination of oxygen and nitrogen in TiCN raw material powders by inert fusion infrared absorption/thermal conductivity method

蔺菲,王蓬,孙晓飞,李朝,左璇

钼及钼合金溅射靶材的研究现状与发展趋势 Research status and development trend of molybdenum and molybdenum alloy sputtering target materials

陈艳芳,谢敬佩,王爱琴,马窦琴,杨康,郭惠丹

烧结温度对30Cr粉末冶金低合金钢组织与性能的影响 Effect of sintering temperature on the microstructures and properties of 30Cr powder metallurgy low alloy steel

刘文胜,张壹金,马运柱,蔡青山,庞心宽,朱文谭,黄柱

高温复合相变蓄热材料压制工艺及性能研究 Study on compacting process and properties of high temperature composite phase change thermal storage material

华建社,袁超,杜金星

粉末冶金结合热轧制备高硼铝合金组织与性能研究 Study on microstructures and properties of high boron aluminum alloy prepared by powder metallurgy combined with hot rolling

元琳琳,韩鹏,陈晓宇,黄晓猛

铜基预合金粉末制备金刚石锯片的性能研究 Study on the properties of diamond saw blades prepared by Cu-based pre-alloyed powders

肖长江,窦志强,李娟,栗正新

刹车速度对铜基粉末冶金摩擦材料性能的影响 Effects of braking velocity on friction properties of Cu-based powder metallurgy friction material

刘联军,李利,吴其俊,车明超

铜基粉末冶金双锥同步器同步环的加工及优化 Processing and optimization of copper-based powder metallurgy synchronizing ring for double cone synchronizer

韦佳

退火工艺对CuPb10Sn10轴瓦材料金相的影响 Influence of annealing process on the metallography of CuPb10Sn10 bearing material

彭林,李佳

FCVD-SPS法制备高硅钢软磁复合铁芯及电磁性能研究 Preparation and electromagnetic properties of high silicon steel soft magnetic composite cores by FCVD-SPS

江志,梁鹏,吴朝阳,罗自贵,樊希安,李杰

钼-铼-镧合金微观组织及力学性能研究 Microstructures and mechanical properties of Mo-Re-La alloy

刘仁智,安耿,杨秦莉,庄飞,王引婷,崔玉清,王娜,曹维成

稀土元素Ce对Cu–Al_2O_3复合材料组织及性能的影响 Effect of rare earth Ce on the microstructure and properties of Cu–Al_2O_3 composites

刘贵民,杜林飞,闫涛,朱硕,惠阳

新型钕铁硼粉末配料设备的研制 Development of the novel batching equipment for Nd-Fe-B powders

杨志冬,寇德万,赵宏江,张卫园

烧结助剂中CaO质量分数及烧结温度对氧化铝基微波陶瓷性能的影响 Influence of CaO content by mass in sintering aid and sintering temperature on the properties of Al_2O_3-based microwave ceramic materials

亢静锐,董桂霞,韩伟丹,李雷,吕易楠,张茜

低温微正压碳热氮化法制备微纳米Mo(C,N)粉末 Preparation of micro-nano Mo(C,N) powders by low temperature carbothermal and micro-positive pressure of nitrogen

戴胜,邓莹,倪海涛,陈慧,胡凯

原料配比对放电等离子烧结钼碳化物的影响 Effects of raw material ratio on the properties of molybdenum carbide prepared by spark plasma sintering method

王大鹏,穆云超,成晓哲,张五奇

固化剂对磷酸盐胶黏剂气密性的影响 Influence of curing agent on airtightness of phosphate adhesive

周彩楼,周文魁,李计元,臧幼洁,孙佳琦

半固态烧结制备石墨烯/7075铝基复合材料与性能研究 Preparation and mechanical properties of graphene reinforced-Al7075 composite by semi-solid sintering

杨斌,杜更新,程福来,贾天琪,安家托,赵紫薇,肖亚姣,张再苗

粉末冶金齿毂模具裂纹分析与解决方法 Analysis and solution of cracks in gear hub die by powder metallurgy

孙立臣,谷文金

微波烧结温度对CNTs/Cu复合材料结构和性能的影响 Effect of microwave sintering temperature on microstructures and properties of CNTs/Cu composites

段柏华,周宇,王德志

TiC颗粒增强铜基复合材料的研究 Study of TiC particle-reinforced Cu matrix composites

李月英,倪慨宇,祝夫文

W–Ti合金互扩散及β结构稳定性研究 Study on the interdiffusion of W–Ti alloy and β phase stability

王庆相,王君龙

CuO对锆酸钙性能的影响 Effects of CuO addition on the properties of CaZrO_3

张汪年,邓宁,王利

气流粉碎/静电分散制备超微粉体失电规律研究 Investigation on the electric charge decay of micropowder prepared by jet milling/electrostatic dispersion

殷鹏飞,张蓉,邓玉,周林

SrCO_3添加量对钨合金电极材料组织和性能的影响 Effect of SrCO_3 content by mass on the microstructure and properties of tungsten alloy electrode materials

张保红,王玲,唐亮亮

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705