Hygroscopicity of wood from Eucalyptus grandis and Pinus taeda subjected to thermal treatment

this study aimed to investigate the effect of the thermal treatment technique under two conditions-autoclave combined with electric oven and electric oven only-on the hygroscopic properties of wood from pinus taeda l. and eucalyptus grandis w. hill ex maiden, comparing them with results obtained for untreated wood. three trees at age 25 years were sampled, with boards being removed at dbh level in order to make specimens 2.5 x 2.5 x 5.0 cm in size in the radial, tangential and axial direction respectively. in the combined treatment, specimens were subjected to thermal treatment in an autoclave set at 130°c/± 3°c and kgf/cm2 pressure for 3 hours, then to a conditioning period, followed by heat in an electric oven set at 160°c/±1°c for the same time. properties being evaluated included water absorption rate, volumetric swelling, water repellency effectiveness and anti-swelling efficiency. results revealed that the thermal treatments being adopted were effective in reducing hygroscopicity and in increasing the dimensional stability of both species, revealing also that the combined autoclave and electric oven treatment provides best results.