|
Effect of Reduction in Three-Drawn and Two-Drawn Single-Run Technology on Roughness of Inner Surface of TubesDOI: 10.2478/v10186-010-0008-0 Keywords: reduction, three-draw and two-draw single-run technology, roughness of surface Abstract: The paper deals with the production of could drawn precision seamless steel tubes with three-drawn and two-drawn single-run technology. The aim of experiment is to verify the possibility of drawing rolled tubes of size 70 × 6.3 mm (material E355) with three-draw single-run technology without intermediate recrystallising annealing on the final size 44 × 3 mm in the fixed reduction and two-draw single-run technology 70 × 6.3 mm without intermediate recrystallising annealing on the final size 50 × 3.75 mm in the fixed reduction and with size 70 × 6.3 mm without intermediate recrystallising annealing on the final size 45 × 3.75 mm in the fixed reduction. Advise the impact choice of the reduction on roughness of inner surface of tubes.
|