Experimental Research upon the Quality of the Sanded Surfaces of Some Decorative Composite Panels

The paper presents an experimental study uponthe quantitative assessment of the surface qualityafter sanding, in case of some lignocellulosecomposite panels with decorative structure, made oflamellas obtained from different wood species,randomly jointed and having as special characteristicthe surfaces with transversal structure. The analyzedpanels were built-up in two variants: poplar withspruce wood and cherry with walnut wood. Theconstituted lamellas were finger-jointed in length andedge-jointed in width. The sanding operation wasperformed using grit sizes of 50, 80, 120 and 150. Inorder to measure the roughness parameters Ra, Rz,Rk, Rpk and Rvk, a MicroProfFRT equipment (withlight beam) was used. The results revealed that thevalues of the roughness parameters had a generaldecreasing tendency with grit size increasing. Theresulted values lead to the conclusion that the finalsanding grinding system applied on longitudinalsection of wood is not valid for the transversalsection of wood which is present on the surfaces ofthe studied panels. In this special case, whensurfaces have a transversal structure, an additionalsanding with a higher grit size is needed, in order toobtain a similar roughness value as for the surfaceswith longitudinal structure.