|
KINETICS OF MOLYBDATE AND PHOSPHATE SORPTION BY SOME CHILEAN ANDISOLS Cinética de adsorción de molibdato y fosfato en algunos Andisoles chilenosKeywords: Oxido de Al y Fe , andisoles chilenos , modelo cinético , molibdato y fosfato , Al- and Fe-oxide , Chilean Andisols , kinetic model , molybdate and phosphate Abstract: The kinetics for the sorption of molybdate and phosphate by four Chilean Andisols have been determined. About 55%o of the molybdate and 61% of the phosphate was sorbed in the first 0.5 h, after which sorption slowly increased, reaching 90%o for molybdate and 97% for phosphate after 72 h. At the same time, OHˉ ions were released into the external solution, raising its pH by 0.85 units for molybdate and by 0.65 units in the case of phosphate. These observations indicated that both anions were sorpbed by a ligand exchange mechanims. Among the five kinetic models examined (),Table, 2 the Elovich equation gave the best fit of the experimental data (R2 = 0.93 to 0.97, standard error = 0.35 to 0.94). The sorption rate constant (α) for both anions was related to the organic matter (OM) content of the soils, especially the content of Al- and Fe-humus complexes. The α values for molybdate were 2.24x10(15) mmol kg-1 h-1 for the Vilcun soil (15% OM), 2.49 x10(12) mmol kg-1 h-1 for the Pemehue soil (16% OM), 8.76x10(10) mmol kg- h-1 for the Osorno soil (20% OM), and 3.11x10(7) mmol kg-1 h-1 for the Piedras Negras soil (24% OM). The corresponding values for phosphate were 3.89x10(7), 5.21x101 , 3.11 x10(12) and 1.08x10(16) mmol kg-1 h-1. The desorption rate constant (β) for the four soils (in the above order) ranged from 0.47 to 0.28 for molybdate, and 0.22 to 0.39 mmol kg-1 h-1 for phosphate. The results suggest that the mineralogical composition and organic matter content of the Andisols control the kinetics for the sorption of both molybdate and phosphate. Molybdate appeared to have a high affinity for Fe- and Al-oxides, while phosphate was largely sorbed to Fe-and Al-humus complexes. Se determinaron las cinéticas de adsorción de molibdato y fosfato en cuatro Andisoles Chilenos. Cerca del 55% del molibdato y 61% del fosfato fueron adsorbidos en las primeras 0,5 h; después la adsorción aumentó lentamente, donde se adsorbió aproximadamente el 90% del molibdato y el 97% del fosfato después de 72 h. Al mismo tiempo, aumentó la concentración de iones OHˉ en la solución de suelo, aumentando el pH en 0,85 unidades para molibdato y en 0,65 unidades en el caso de fosfato. Estas observaciones indican que ambos aniones son adsorbidos por el mecanismo de intercambio de ligandos. Entre los cinco modelos cinéticos examinados (Tabla 2), la ecuación de Elovich mostró los mejores ajustes de los datos experimentales (R2 = 0,93 a 0,97; SE = 0,35 a 0,94). La velocidad de adsorción (α), para ambos aniones, se relacionó con el contenido de materia orgánica (MO) de los suelos, especialme
|