Kelsey Centrifugal Jig was found to be promising for the beneficiation of fine iron particles. The present study was carried out to have a better understanding of the separation process of Kelsey Jig through detailed experimentation. Beneficiation of fine iron ore fines was studied in Kelsey Jig. A constant pulp density (25% solids) of the feed slurry was maintained in the study. The feed rate was also kept constant at 60 kg/hr (dry solids basis). Magnetite of size -0.853+0.6 mmwas used as ragging material to avoid the pegging of internal screen having an opening of 425 μm. The rotational speed was found to have significant effect on the depth of the ragging bed and its porosity. Pulsation was identified as the key factor in stratifying the iron bed and defining the misplacement as well as ragging bed porosity, influencing the mass yield and quality of product.
References
[1]
A. Bandopadhyay, “Multi-Gravity Separator—Equipment for Separation of Fines,” Processing of Fines, Vol. 2, 2000, pp. 81-92.
[2]
B. Sarkar, S. Chandra and A. Das, “Advanced Gravity Separators—A Review of State of the Art Technology,” Proceedings of National Seminar on Advanced Gravity Separator, Jamshedpur, 2007, pp. 57-74.
[3]
Pradip, “Processing of Alumina-Rich Indian Iron Ore Slimes,” International Journal of Mineral, Metals and Materials Engineering, Vol. 59, No. 5, 2006, pp. 551- 568.
[4]
B. A. Wills and T. Napier-Munn, “Mineral Processing Technology,” Elsevier Science & Technology Books, 2006.
[5]
S. Roy, A. Das and M. K. Mohanty, “Feasibility of Producing Pellet Grade Concentrate by Beneficiation of Iron Ore Slimes in India,” Separation Science & Technology, Vol. 42, No. 14, 2007, pp. 3271-3287.
doi:10.1080/01496390701514824
[6]
N. P. Nayak, A. Das and B. K. Pal, “Characterization Driven Processing of Indian Iron Ore Slime,” Accepted in International Journal of Research in Chemistry and Environment, 2013.
[7]
R. K. Singh and A. Das, “Study of Separation Features of Fine Coal Cleaning in Kelsey Centrifugal Jig,” 26th International Mineral Processing Congress, New Delhi, September 2012, pp. 5047-5056.
[8]
P. Tucker, “Modeling the Kelsey Centrifugal Jig,” Mineral Engineering, Vol. 8, No. 3, 1995, pp. 333-336.