This article reviews the literature reports base on agro waste plastic composites using different fiber as fillers and reinforcements. Various processing methods and conditions; compression molding process, injection molding, and extrusion method are used in the composites productions. Characterization challenges associated with the agro waste plastic composites productions were also examined. Thus, the findings of this research review can be use as a data base for further inquiring into the agro waste plastic composites in a view to enhance the development of the sector.
References
[1]
D. S. Bavan and G. C. M. Kumar, “Potential Use of Fibre Composite in India,” Journal of Reinforced Plastic and Composites, Vol. 29, No. 24, 2010, 3600. doi:10.1177/0731684410381151
[2]
M. S. Abubakar and D. Ahmad, “Pattern of Energy Consumption in Millet Production for Selected Farms in Jigawa, Nigeria,” Australia Journal of Applied Sciences, Vol. 4, No. 4, 2010, pp. 665-672.
[3]
M. Zurina, H. Ismail and A. A. Bakar, “Rice Husk Filled Powder Polystyrene/Styrene Butadiene Rubber Blends,” Journal of Applied Polymer Science, Vol. 81, No. 63, 2004, pp. 742-753.
[4]
D. ?. Ayfer, K. Hülya and M. Fatih, “Tea Mill Waste Fibers Filled Thermoplastic Composites: The Effects of Plastic Type and Fiber Loading,” Journal of Reinforced Plastics and Composites, Vol. 30, No. 10, 2011, p. 833. doi:10.1177/0731684411408752
[5]
M. N. Ortega-Leyva, “Composites from Plastic and Wood: What Do Have to Know?” Journal of Plastic Technology, Vol. 23, No. 20, 2008, pp. 23-28.
[6]
R. Steward, “Wood Fibre Composite: Fierce Competition Drives Advances in Equipment, Materials and Processes,” Journal of Plastic Engineering, Vol. 63, No. 46, 2007, pp. 21-28.
[7]
S. Ates, Y. Ni and A. Tozluoglu, “Characterization and Evaluation of Paulownia Elongata as a Raw Material for Paper Production,” African Journal of Biotechnology, Vol. 7, No. 22, 2008, pp. 4153-4158.
[8]
B. McGee, “Folder Corn/Grain Corn: Area and Production, Ontario by Country,” 2007. http:/www.omafra.gov.on.ca
[9]
M. R. Dominique, D. M. R. Georget, O. Abd Elmoneim, A. E. O. Elkhalifa and P. S. Beltom, “Structural Changes in Kafirin Extracted from a White Type II Tannin Sorghum,” Journal of Cereal Science, Vol. 57, No. 48, 2012, pp. 106-111.
[10]
S. Panthapulakkal, M. Sain and S. Law, “Enhancement of Processability of Rice Husk Filled High Density Polyethylene Composites Profiles,” Journal of Thermoplastic Composite Material, Vol. 18, No. 5, 2005, pp. 445-459. doi:10.1177/0892705705054398
[11]
C. Albano, A. Karam, N. Dominguez, Y. Sanchez, J. Gonzalez, O. Aguirre and L. Catano, “Thermal, Mechanical, Morphological, Thermogravimetric, Rheological and Toxicological Behavior of HDPE/Seaweed Residues Composites,” Journal of Composite Structures, Vol. 71, No. 3-4, 2005, pp. 282-288. doi:10.1016/j.compstruct.2005.09.036
[12]
A. Aminullah, M. S. J. Syed, N. Azlan, N. H. Moh’h, Z. A. I. Moh’h and H. D. Rozman, “Effect of Filler Composition and Incorporation of Additives on the Mechanical Properties of Polypropylene Composites with High Loading Lignocellulosic Materials,” Journal of Reinforced Plastic and Composite, Vol. 29, No. 20, 2010, p. 3115. doi:10.1177/0731684410367532
[13]
M. Sain and S. Panthapulakkal, “Green Composite: Polymer Composites and Environment,” Wood Publishing, Cambridge, 2003.
[14]
M. M. Sain, J. Balatinecz and S. Law, “Creep Fatigue in Engineered Wood Fibres and Plastic Composites,” Journal of Applied Polymer Science, Vol. 77, No. 23, 2000, pp. 260-268. doi:10.1002/(SICI)1097-4628(20000711)77:2<260::AID-APP3>3.0.CO;2-H
[15]
M. Sain, S. Law, F. Suhara and A. Boullinox, “Stiffness Correlation of Natural Fibre Filled Polypropylene Composites,” Proceeding of Wood Fibre Polymer Composites Symposium, 25-27 March 2003.
[16]
W. T. Tsai, C. Y. Chang and S. L. Lee, “A Low Cost Absorbent from Agricultural Wastes Corn Cob by Zinc Chloride Activation,” Journal of Biotechnology, Vol. 64, No. 34, 1998, pp. 211-217.
[17]
D. Wang and X. S. Sun, “Low Density Particle Board from Wheat Straw and Corn Pith,” Journal of Industrial Crops Product, Vol. 15, No. 1, 2002, pp. 43-50. doi:10.1016/S0926-6690(01)00094-2
[18]
H. S. Yang, H. J. Kim, H. J. Park, B. J. Lee and T. S. Hwang, “Water Absorption Behaviour and Mechanical Properties of Lignocellulosic Filler—Polyolefin Bio-Com-Posites,” Journal of Composite Structures, Vol. 72, No. 4, 2006, pp. 429-437. doi:10.1016/j.compstruct.2005.01.013
[19]
C. A. Rodriguez, V. A. Alvarez, J. Moran, S. Moreno, R. Petrucci, J. M. Kenny and A. Vazquez, “Mechanical Properties Evaluation of a Recycled Flax Fibre Reinforced Vinyl Ester,” Journal of Composites Materials, Vol. 40, No. 3, 2006, pp. 245-256. doi:10.1177/0021998305053447
[20]
H. S. Yang, H. G. Kim, J. Son, B. J. Lee and T. S. Twang, “Rice Husk Flour Filled with Polypropylene Composites, Mechanical and Morphological Studies,” Journal of Composite Structure, Vol. 63, No. 3-4, 2006, pp. 305-312. doi:10.1016/S0263-8223(03)00179-X
[21]
H. G. B. Premlal, H. Ismail and A. Baharin, “Comparison of Mechanical Properties of Rice Husk Filled Polypropylene Composites with Talc Polypropylene Composites,” Journal of Polymer Testing, Vol. 21, No. 7, 2002, pp. 833-839. doi:10.1016/S0142-9418(02)00018-1
[22]
W. A. W. A. Rahman, T. S. Lee, A. R. Rahmatt, N. M. Isa, M. S. N. Salleh and M. Mokhtar, “Comparison of Rice Husk Filled Polyethylene Composite and Natural Wood under Weathering Effects,” Journal of Composite Materials, Vol. 45, No. 13, 2011, p. 1403. doi:10.1177/0021998310381545
[23]
S. M. L. Rosa, S. M. B. Nachtigall and C. A. Ferreira, “Thermal and Dynamic Mechanical Characteristics of Rice Husk Filled with Polypropylene Composites,” Macromolecular Research, Vol. 17, No. 1, 2009, pp. 8-13. doi:10.1007/BF03218594
[24]
K. B. Adhikiry, S. Pang and M. P. Staiger, “Dimensional Stability and Mechanical Behaviour of Wood-Plastic Composite Based on Recycling and Virgin High-Density Polypropylene (HDPE),” Compos Part B—Engineering, Vol. 39, No. 5, 2008, pp. 807-815. doi:10.1016/j.compositesb.2007.10.005
[25]
F. P. La Mantia, M. Morreale and I. Z. A. Mohd, “Processing and Mechanical Properties of Organic Filled Poly- propylene Composites,” Journal of Applied Polymer Science, Vol. 96, No. 83, 2005, pp. 1906-1913. doi:10.1002/app.21623
[26]
T. Li and N. Yan, “Mechanical Properties of Wood Floor/ HDPE/Ionomer Composites,” Compos Part A—Journal of Applied Science, Vol. 38, No. 1, 2000, pp. 1-12. doi:10.1016/j.compositesa.2006.02.003
[27]
M. G. Salemane and A. S. Luyt, “Thermal and Mechani- cal Properties of Polypropylene-Wood Powder Composites,” Journal of Applied Polymer Science, Vol. 100, No. 67, 2006, pp. 4173-4180. doi:10.1002/app.23521
[28]
R. T. Woodhams, G. Thomas and D. K. Rodgers, “Wood Fibre as Reinforcing Fillers for Polyolefins,” Journal of Polymer Engineering and Science, Vol. 24, No. 15, 1984, pp. 1166-1171. doi:10.1002/pen.760241504
[29]
M. Simone, L. Rosa, F. S. Evelise, A. F. Carlos and M. B. N. Sonia, “Studies on the Properties of Rice Husk Filled Polypropylene Composites—Effect of Maleate Polypropylene,” Journal of Material Science, Vol. 12, No. 3, 2009, pp. 333-338.
[30]
T. Thiomothy, M. Ryan, C. Lisa, W. Christiana and B. Caroline, “Development and Characteristics of New Materials Base on Plastic Waste and Agro Fibre,” Business Media, Vol. 43, No. 26, 2008, pp. 4057-4068.
[31]
B. Treffler, “The Functionalizing of Natural Materials: The Alternative WPC Composite Conquers the Wood and Plastic World,” Revista de Plastic Moderns, Vol. 93, No. 68, 2007, pp. 100-102.
[32]
V. Alvarez, A. Iannoni, J. M. Kenny and A. Vazquez, “Influence of Twin-Screw Processing Conditions on the Mechanical Properties of Biocomposites,” Journal of Com- posite Materials, Vol. 39, No. 22, 2005, pp. 2023-2038. doi:10.1177/0021998305052025
[33]
S. P. Chandak, “Waste Biomass Workshop,” UNEP S. 2010. http:/www.cshd.dap.edu.ph/unep_biomass
[34]
A. E. O. Elkhalifa, D. M. R. Georget, S. A. Barker and P. S. Belton, “Study of the Physical Properties of Kafirin during the Fabrication of Tablet for Pharmaceutical Applications,” Journal of Cereal Science, Vol. 50, No. 23, 2009, pp. 159-165. doi:10.1016/j.jcs.2009.03.010
[35]
H. Ricardo, E. Gustavo, T. Martinez, C. E. Gonzalo, I. G. C. Pedro, M. B. Cesar, D. A. Santiago, G. M. Davier, V. C. M. Carlos and M. D. Osvaldo, “A Preliminary Study on the Preparation of Wood Plastic Composites from Urban Wastes Generated in Merida, Mexico with Potential Applications as Building Materials,” Journal of Waste Management and Research, Vol. 28, No. 9, 2010, pp. 838-847. doi:10.1177/0734242X09350059
[36]
M. Adreas and W. Harmut, “Injection Molding of Natural Fibre Reinforced Thermoplastics,” Kunstoffe Plast Europe, Vol. 91, No. 44, 2001, pp. 25-25.
[37]
R. H. Cruz-Estrada, E. G. Canche and F. Herrera, “Wood Plastic Composites Base on Recycled Urban Materials as an Alternative for Roofing,” Abstract Book of the International Symposium on Advance Biomass Science and Technology for Bio base Products, Beijing, 23-25 March 2007, p. 98.
[38]
B. G. Kenneth, “Engineering Material: Properties and Selection,” 8th Edition, Pearson Prentice Hall, Upper Saddle River, 2005.
[39]
K. Behzad, “Preparation and Characterization of Lignocellulosic Material Filled Polyethylene Composite Foams,” Journal of Thermoplastic Composite Materials, Vol. 25, No. 8, 2011, pp. 1-10.
[40]
S. Panthapulakkal, M. Sain and S. Law, “Effect of Coupling Agent on Rice Husk Filled with HDPE Extruded Profiles,” International Journal of Polymer, Vol. 54, No. 32, 2005, pp. 137-142. doi:10.1002/pi.1657
[41]
J. E. Crespo, L. Sánchez, D. García and J. López, “Study of the Mechanical and Morphological Properties of Plasticized PVC Composites Containing Rice Husk Fillers,” Journal of Reinforced Plastics and Composites, Vol. 27, No. 3, 2008, pp. 229-243. doi:10.1177/0731684407079479
[42]
UNCEP, “Governing Council Ministerial Environment Forum, during Its 25th Session in February,” 2009.
[43]
D. S. Chaudhery, M. C. Jokands and F. Cser, “Recycling Rice Husk Ash: Filler Material Polymeric Composites,” Journal of Advance in Polymer Technology, Vol. 23, No. 2, 2004, pp. 147-155. doi:10.1002/adv.20000
[44]
S. T. Georgopoulos, P. A. Tarantile, E. Avgerinos, A. G. Andreopoulos and E. G. Koukios, “Thermoplastic Reinforced with Fibrous Agricultural Residues,” Journal of Polymer Degradation and Stability, Vol. 90, No. 2, 2005, pp. 303-312. doi:10.1016/j.polymdegradstab.2005.02.020
[45]
K. B. Michael, “Engineering Material: Properties and Selection,” 8th Edition, Pearson Prentice Hall, Upper Saddle River, 2005.
[46]
S. Y. Lea, H. S. Yang, H. J. Kim, C. S. Jeong, B. S. Lim and J. N. Lee, “Creep Behaviour and Manufacturing Parameters of Wood Flour Filled with Polypropylene Composites,” Journal of Composite Structure, Vol. 65, No. 3-4, 2004, pp. 459-469. doi:10.1016/j.compstruct.2003.12.007
[47]
R. Zah, R. Hischier, A. L. Leao and I. Braun, “Curauá Fibers in the Automobile Industry—A Sustainability Assessment,” Journal of Clean Production, Vol. 15, No. 11- 12, 2007, pp. 1032-1040. doi:10.1016/j.jclepro.2006.05.036
[48]
N. Venkateshwaran, A. Elayaperumal, A. Alavudeen and M. Thiruchitrambalam, “Review of Artificial Neural Network and Taguchi Application in Polymer Matrix Composites,” Journal of Review Advance Material Science, Vol. 29, 2011, p. 100.
[49]
R. M. Rowell, A. R. Sanadi, D. F. Caufield and R. E. Jacobson, “Utilization of Natural Fibres in Plastic Composites: Problems and Opportunities,” In: A. L. Leao, F. X. Carvalho and E. Frollini, Eds., Lignocellulosic Plastic Composites, University of Rio de Janeiro, Wisconsin, 1997, pp. 23-51.
[50]
P. M. Stefani, D. Garcia, J. Lopez and A. Jimenes, “Thermogravimetric Analysis of Composites Obtained from Sintering of Rice Husk Scrap Tire Mixture,” Journal of Thermal Analysis and Calorimetry, Vol. 81, No. 2, 2005, pp. 315-320. doi:10.1007/s10973-005-0785-4
[51]
S. K. Mazumder, “Composites Manufacturing: Materials, Product and Process Engineering,” CRC Press, Boca Raton, 2001. doi:10.1201/9781420041989
[52]
C. Rauwendaal, “Polymer Extrusion,” 4th Edition, Hanser Gardner, 2001.
[53]
H. Gastrow, “Injection Molds: 130 Proven Designs,” Hanser Gardner, 2002.
[54]
G. U. Raju and S. Kumarappa, “Experimental Studies on Mechanical Properties of Ground Nut Shell Particle Reinforced Epoxy Composites,” Journal of Reinforced Plastic and Composites, Vol. 30, No. 12, 2011, pp. 1029- 1037. doi:10.1177/0731684411410761
[55]
F. Hussain, H. Mehdi, O. Masami and E. G. Russell, “Review Article: Polymer-Matrix Nano Composites, Processing, Manufacturing, and Application: An Overview,” Journal of Composite Materials, Vol. 40, No. 17, 2006, pp. 1511-1575. doi:10.1177/0021998306067321
[56]
“The Clean Sky: Joint Technology Iniative,” 2009. http://www.clean sky.eu
[57]
B. Treffler, “The Functionalizing of Natural Materials: The Alternative WPC Composite Conquers the Wood and Plastic World,” Revista de Plastic Moderns, Vol. 93, No. 63, 2007, pp. 100-102.
[58]
J. Senqupta, “Recycling of Agro Industrial Wastes for Manufacturing of Build Materials Components in India. An Overview,” Civil Engineering Construction, Vol. 15, No. 6, 2002, pp. 23-33.
[59]
S. Panthapulakkal and M. Sain, “Agro-Residue Reinforced HDPE Composites: Fibre Characterization and Ana- lysis of Composites Properties,” Composites Part A, Vol. 38, No. 6, 2007, pp. 1445-1454. doi:10.1016/j.compositesa.2007.01.015
[60]
A. Pramanick and M. Sain, “Nonlinear Viscoelastic Creep Prediction of HDPE Agro Fibre Composites,” Journal of Composites Materials, Vol. 40, No. 5, 2006, pp. 417-431. doi:10.1177/0021998305055197
[61]
M. Razavian, R. Halladj and S. Askari, “Recent Advances in Silicoaluminophosphate Nanocatalysts Synthesis Techniques and their Effects on Particle Size Distribution, Review Advance Material Science,” Review on Advance Material Science, Vol. 29, 2011, pp. 83-99.
[62]
H. Ismail, Z. Mohamad and A. A. Bakar, “Comparative Study on Processing, Mechanical Properties, Thermo-Oxidative Aging, Water Absorption, and Morphology of Rice Husk Powder and Silica Filler in Polystyrene/Styrene Butadiene Rubber Blends,” Journal of Polymer Plastics Technology and Engineering, Vol. 42, No. 1, 2003, pp. 81-103. doi:10.1081/PPT-120016337
[63]
N. Ahmad and Y. W. Park, “Green Economy Key to Overcoming Resource Constraints in Asia-Pacific,” UN, 2012. http://www.un.org/apps/news/story.asp
[64]
S. M. Ali and Z. Z. Romina, “The Effects of Polypropylene Fibres and Rubber Particles on Mechanical Properties of Cement Composites Containing Rice Husk Ash,” Procedia Engineering, Vol. 10, 2011, pp. 3608-3615.doi:10.1016/j.proeng.2011.04.594
[65]
S. Panthapulakkal, A. Zereshkian and M. Sain, “Preparation and Characterization of Wheat Straw Fibres for Reinforcing Applications Injection Molded Thermoplastic Composites,” Journal of Bioresource Technology, Vol. 97, No. 2, 2006, pp. 265-272. doi:10.1016/j.biortech.2005.02.043
[66]
S. Panthapulakkal, M. Sain and S. Law, “Effect of Coupling Agent on Rice Husk Filled with HDPE Extruded Profiles,” International Journal of Polymer, Vol. 54, No. 1, 2005, pp. 137-142. doi:10.1002/pi.1657
[67]
C. A. Baillie, “Engineer with a Local and Global Society,” Morgan and Claypool publishers, San Rafael, 2006.
[68]
G. Dijon, “Mechanical Properties of Fiber Composites,” Ph.D. Thesis, Department of Materials and Department of Biology, University of London, London, 2002.
[69]
P. E. Kenmore and D. Ford, “Food Security,” 2009.http://www.fao.org
[70]
K. Van Rijswijk, W. D. Brouwer and A. Beukers, “Application of Natural Fibre Composites in the Development of Rural Societies,” Food and Agricultural Organization of United Nation, Rome, 2003.
[71]
J. George, M. S. Sreekala and S. Thomas, “A Review on Interface Modification and Characterization of Natural Fibre Reinforced Plastic Composites,” Journal of Polymer Engineering and Science, Vol. 41, No. 9, 2001, pp. 1471-1485.
[72]
B. McGee, “Folder Corn/Grain Corn: Area and Production, Ontario by country,” 2006. http:/www.omafra.gov.on.ca
[73]
N. W. Choi, I. Mori and Y. Ohama, “Development of Rice Husks Plastic Composite for Building Materials,” Journal of Waste Management, Vol. 26, No. 2, 2006, pp. 189-194. doi:10.1016/j.wasman.2005.05.008
[74]
M. Maniruzzaman, M. A. Rahman, A. M. Gafur, H. Fabritius and D. Raabe, “Modification of Pineapple Leaf Fibres and Graft Copolymerization of Acrylonitrile onto Modified Fibres,” Journal of Composite Materials, Vol. 46, No. 1, 2012, pp. 79-90. doi:10.1177/0021998311410486
[75]
S. Azim, “Hemp Fibres and Its Composites—A Review,” Journal of Composite Materials, Vol. 46, No. 8, 2012, pp. 973-986. doi:10.1177/0021998311413623
[76]
S. H. Aziz and M. P. Ansell, “Optimizing the Properties of Green Composites,” In: C. A. Baillie, Ed., Journal of Green Composite, Woodhead Publisher Limited, Cambridge, 2004, pp. 154-180.
[77]
L. Y. Mwaikambo and M. P. Ansell, “Hemp Fibre Reinforced Cashew Nut Shell Liquid Composite,” Journal of Composite Science Technology, Vol. 63, No. 9, 2003, pp. 1297-1305. doi:10.1016/S0266-3538(03)00101-5
[78]
M. R. Ismail, M. A. M. Ali and A. H. Zahra, “Study on Sugar Cane Bagasse Fibre Thermoplastics,” Journal of Elastomers and Plastics, Vol. 41, No. 3, 2009, pp. 245-262. doi:10.1177/0095244308095014
[79]
B. Ndazi, J. V. Tesha and E. T. N. Bisanda, “Some Op- portunities and Challenges of Producing Biocomposites from Non-Wood Residue,” Journal of Material Science, Vol. 41, No. 21, 2006, pp. 6984-6990. doi:10.1007/s10853-006-0216-3
[80]
A. Iftekhar and A. M. Prakash, “Mechanical Properties of Fly Ash Filled High Density Polyethylene,” Journal of Minerals & Minerals Characterization & Engineering, Vol. 9, No. 3, 2010, pp. 183-198.