Predictability of Hardness of the Heat Affect Zone in Aluminum Weldments Cooled in Palm Oil Based on Hardness of Similarly Cooled Mild Steel and Cast Iron Weldments
The predictability of hardness of the heat affected zone (HAZ) in aluminum weldments cooled in palm oil, based on hardness of similarly cooled mild steel and cast iron weldments has been ascertained. The general model: α = 1.2769indicates that HAZ hardness of aluminium weldment is dependant on the ratio of product to sum of HAZ hardness of mild steel and cast iron weldments cooled in palm oil under the same conditions. The maximum deviations of the model-predicted HAZ hardness values α, μ and β from the corresponding experimental values αexp, μexp and βexp were less than 0.04% indicating the reliability and validity of the model.
References
[1]
M. Prager and C. S. Shira, “Welding of Precipitation Hardening Nickel-Base Alloys,” Weld Research Council Bulletin, Vol. 6, 1968, pp. 128-155.
[2]
M. H. Haasken and G. H. Matthey, “New Approach to Weldability of Nickel-Base As-Cast and Powder Metallurgy Superalloys,” Weld Journal, Vol. 61, 1982, pp. 25-30.
[3]
W. A. Owczarski, D. S. Duvall and C. P. Sullivan, “Model for Heat Affected Zone Cracking in Nicke-Base Superalloy,” Weld Journal, Vol. 45, 1966, pp. 145-155.
[4]
A. Thakur, N. L. Richards and M. C. Chaturvedi, “On Crack-Free Welding of Cast Inconel 738,” International Journal of Joining Materials, Vol. 15, 2003, pp. 21-25.
[5]
E. E. Nnuka, F. A. Ovat and M. I. Oseni, “Effect of Electrode Types on the Mechanical Properties and Structure of Welded Steel Joints,” Journal of Metallurgical and Materials Engineering, Vol. 3, No. 1, 2008, pp. 7-13.
[6]
C. I. Nwoye, “Quadratic Model for Predicting the Hardness of Heat Affected Zone in Water Cooled Cast Iron Weldment in Relation to Similarly Cooled Aluminum and Mild Steel Weldments,” Journal of Minerals & Materials Characterization & Engineering, Vol. 8, No. 10, 2009, pp. 765-773.
[7]
C. I. Nwoye, “Quadratic and Linear Models for Predicting the Hardness of Heat Affected Zone in Air Cooled Cast Iron Weldment in Relation to the HAZ Hardness of Aluminum and Mild Steel Weldments Cooled in Same Media,” Researcher, Vol. 1, No. 4, 2009, pp. 1-6.
[8]
C. I. Nwoye, C. N. Anyakwo, E. Obidiegwu and N. E. Nwankwo, “Models for Assessment and Computational Analysis of Hardness of the Heat Affected Zone in Water Cooled Aluminum Weldment,” Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No. 8, 2011, pp. 707-715.
[9]
C. I. Nwoye, “Comparative Studies of the Cooling Ability of Hydrocarbon Based Media and their Effects on the Hardness of the Heat Affected Zone (HAZ) in Weldments,” Journal of Metallurgical and Materials Engineering, Vol. 3, No. 1, 2008, pp. 35-37.
[10]
S. B. Hassan, J. B. Agboola. V. S. Aigbodion and E. J. Williams, “Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant,” Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No. 2, 2011, pp. 161-172.
![\"\"](\"Edit_852f1529-2673-4e83-b18b-5e3b61703410.jpg\")
