H. J. McQueen, “Historical aspects of thermomechanical processing for steels,” Materials Science Forum, vol. 539–543, no. 5, pp. 4397–4404, 2007.
[2]
H. J. McQueen, “Successful transition from wrought iron to steel in hot work processing with mechanism differences,” Materials Science Forum, vol. 638-642, pp. 3380–3387, 2010.
[3]
C. M. Sellars, “Hot working and forming processes,” C. M. Sellars and G. J. Davies, Eds., pp. 3–15, Metals Society, London, UK, 1980.
[4]
H. J. McQueen, “Behavior of pearlite in thermomechanical processing and service-historical perspective,” Materials Science Forum, vol. 706-709, pp. 2776–2781, 2012.
[5]
C. M. Sellars, “Al alloys, physical mechanical properties,” in Proceedings of the International Conference on Aluminium Alloys (ICAA3 '92), L. Arnberg, et al., Ed., vol. 3, pp. 89–105, NTH/SINTEFF, Trondheim, Norway, 1992.
[6]
H. J. McQueen and J. J. Jonas, “Therrnomechanical processing (TMP) of aluminum alloys,” in Proceedings of the Aluminium, C. Q. Chen, Ed., pp. 727–747, Academic Pub, Beijing, China, 1990.
[7]
H. J. McQueen, Materials Science Forum, vol. 519-523, ICAA10, pp. 1493–1498, 2006.
[8]
H. J. McQueen and O. C. Celliers, “Application of hot workability studies to extrusion processing—part II. Microstructural development and extrusion of Al, Al-Mg, and Al-Mg-Mn alloys,” Canadian Metallurgical Quarterly, vol. 35, no. 4, pp. 305–319, 1996.
[9]
H. J. McQueen and O. C. Celliers, “Application of hot workability studies to extrusion processing—part III: physical and mechanical metallurgy of Al-Mg-Si and Al-Zn-Mg alloys,” Canadian Metallurgical Quarterly, vol. 36, no. 2, pp. 73–86, 1997.
[10]
H. J. McQueen and E. Evangelista, “Hot working defines thermomechanical processing (TMP) for aluminum alloys and composites,” Materials Science Forum, vol. 706–709, pp. 89–96, 2012.
[11]
H. J. McQueen, S. Spigarelli, M. E. Kassner, and E. Evangelista, Hot Deformation and Processing of Aluminum Alloys, CRC Press (Tailor and Francis Group), Boca Raton, Fla, USA, 2011.
[12]
H. J. McQueen, “Substructural influence in the hot rolling of Al alloys,” Journal of the Minerals, Metals and Materials Society, vol. 50, no. 6, pp. 28–33, 1998.
[13]
I. Poschmann and H. J. McQueen, “Static restoration of aluminium during multi-stage hot rolling simulation,” Materials Research and Advanced Techniques, vol. 87, no. 5, pp. 349–356, 1996.
[14]
I. Poschmann and H. J. McQueen, “Multi-step hot working of Al-5 wt.% Mg,” Materials Research and Advanced Techniques, vol. 88, no. 1, pp. 14–22, 1997.
[15]
J. Hirsch, in Proceedings of the International Conference on Thermomechanical Processing of Steels and Other Materials (Thermec '97), T. Chandra and T. Sakai, Eds., pp. 1083–1094, TMS, Warrendale, Pa, USA, 1998.
[16]
H. J. McQueen and M. E. Kassner, Light Weight Alloys for Aerospace Applications, Edited by K. Jata, TMS-AIME, Warrendale, Pa, USA, 2001.
[17]
H. J. McQueen and E. Evangelista, Materials in the Automotive Industry, The Metallurgical Society of CIM, Montreal, Canada, 2001.
[18]
C. M. Sellars, From Trial and Error to Computer Modeling of TMP, Bessemer Lecture, Institute of Metals, Materials, Minerals, London, UK, 2010.
[19]
J. G. Morris, Ed., Thermomechanical Processing of Al Alloys, Metallurgical Society of AIME, 1979.
[20]
E. H. Chia and H. J. McQueen, Eds., Microstructural Control in Al Alloys, Metallurgical Society of AIME, Warrendale, Pa, USA, 1986.
[21]
D. J. Lloyd, Advances in Industrial Materials, Edited by D. S. Wilkinson, The Metallurgical Society of CIM, Montreal, Canada, 1998.
[22]
H. J. McQueen, Hot Deformation of Aluminum Alloys, TMS-AIME, Warrendale, Pa, USA, 1991.
[23]
H. J. McQueen and W. Blum, Aluminium, vol. 80, pp. 1151–1159, 2004.
[24]
H. J. McQueen, “Aerospace materials and manufacturing IV: advances in processing/repair,” in Proceedings of the 47th Conference of Metallurgists, M. Jahazi, P. C. Patnaik, and M. Elboudjaini, Eds., pp. 111–123, MetSociety of CIM, Montreal, Canada, 2008.
[25]
H. J. McQueen, “Magnesium in the Global Age,” M. O. Pekguleryuz and L. W. MacKenzie, Eds., pp. 399–420, MetSociety of CIM, Montreal, Canada, 2006.
[26]
B. M. Watts, M. J. Stowell, B. L. Baikie, and D. G. E. Owen, “Superplasticity in Al-Cu-Zr alloys—1. Material preparation and properties,” Metal Science, vol. 10, no. 6, pp. 189–197, 1976.
[27]
D. L. Bourell and H. J. McQueen, “Thermomechanical processing of iron, titanium, and zirconium alloys in the bcc structure,” Journal of Materials Shaping Technology, vol. 5, pp. 53–73, 1987.
[28]
H. J. McQueen and D. L. Bourell, “Hot workability of metals and alloys,” Journal of Metals, vol. 39, no. 9, pp. 28–35, 1987.
[29]
J. J. Jonas and C. M. Sellars, in Proceedings of the Sir Robert Honeycombe Commemmorative Symppsium, pp. 147–177, Institute of Materials Royal Society, London, UK, 1992.
[30]
H. J. McQueen, N. D. Ryan, and E. V. Konopleva, in Proceedings of the Guthrie Symposium onMetallurgy, M. Isac, Ed., pp. 205–211, McGill Metals Processing Center, Montreal, Canada, 2011.
[31]
V. M. Khlestov, E. V. Konopleva, and H. J. McQueen, “Effect of deformation in controlled rolling on ferrite nucleation,” Canadian Metallurgical Quarterly, vol. 40, no. 2, pp. 221–234, 2001.
[32]
E. Evangelista, H. J. McQueen, M. Niewczas, and M. Cabibbo, “Hot workability of 2304 and 2205 duplex stainless steels,” Canadian Metallurgical Quarterly, vol. 43, no. 3, pp. 339–354, 2004.
[33]
H. J. McQueen, S. Yue, N. D. Ryan, and E. Fry, “Advanced materials and technologies,” L. A. Dobrzanski, Ed., pp. 295–332, Silesian Technical University, Gliwice, Poland, 1995.
[34]
H. J. McQueen and E. Evangelista, “Super-high strength steels,” A. J. Deardo, et al., Ed., Electronic Plenary, p. 22, Associazione Italiana di Metallurgia, Milan, Italy, 2010.
