This paper presents a microfluidic system for the active and precise control of microdroplet division in a micro device. Using two horizontal pneumatic valves formed at downstream of bifurcating microchannel, flow resistances of downstream channels were variably controlled. With the resistance control, volumetric ratio of downstream flows was changed and water-in-oil microdroplets were divided into two daughter droplets of different volume corresponding to the ratio. The microfluidic channels and pneumatic valves were fabricated by single-step soft lithography process of PDMS (polydimethylsiloxane) using SU-8 mold. A wide range control of the daughter droplets’ volume ratio was achieved by the simple channel structure. Volumetric ratio between large and small daughter droplets are ranged from 1 to 70, and the smallest droplet volume of 14 pL was obtained. The proposed microfluidic device is applicable for precise and high throughput droplet based digital synthesis.
Mazutis, L.; Griffiths, A.D. Selective droplet coalescence using microfluidic systems. Lab Chip 2012, 12, 1800–1806, doi:10.1039/c2lc40121e.
[7]
Mazutis, L.; Baret, J.C.; Griffiths, A.D. A fast and efficient microfluidic system for highly selective one-to-one droplet fusion. Lab Chip 2009, 9, 2665–2672.
[8]
Ji, J.; Zhao, Y.; Guo, L.; Liu, B.; Ji, C.; Yang, P. Interfacial organic synthesis in a simple droplet-based microfluidic system. Lab Chip 2012, 12, 1373–1377.
[9]
Baroud, C.N.; Callaire, F.; Dangla, R. Dynamics of microfluidic droplets. Lab Chip 2010, 10, 2032–2045, doi:10.1039/c001191f.
Gu, H.; Duits, M.H.G.; Mugele, F. Droplets formation and merging in two-phase flow microfluidics. Int. J. Mol. Sci. 2011, 12, 2572–2597.
[12]
Churski, K.; Korczyk, P.; Garstecki, P. High-throughput automated droplet microfluidic system for screening of reaction conditions. Lab Chip 2010, 10, 816–818.
[13]
Fidalgo, L.M.; Whyte, G.; Bratton, D.; Kaminski, C.F.; Abell, C.; Huck, W.T.S. From microdroplets to microfluidics: Selective emulsion separation in microfluidic devices. Angew. Chem. Int. Ed. 2008, 47, 2042–2045.
[14]
Link, D.R.; Anna, S.L.; Weitz, D.A.; Stone, H.A. Geometrically mediated breakup of droplets in microfluidic devices. Phys. Rev. Lett. 2004, 92, 054503.
[15]
Menetrier-Deremble, L.; Tabeling, P. Droplet breakup in microfluidic junctions of arbitrary angles. Phys. Rev. E 2006, 74, 035303.
[16]
Moritani, T.; Yamada, M.; Seki, M. Generation of uniform-size droplets by multistep hydrodynamic droplet division in microfluidic circuits. Microfluid Nanofluid 2011, 11, 601–610, doi:10.1007/s10404-011-0826-1.
[17]
Fujii, M.; Kawai, K.; Yoon, D.H.; Shoji, S. Volume controlled high throughput picoliter droplet generation system using cascade multi-stage separation channel. In Proceedings of the IEEE 24th International Conference on Micro Electro Mechanical Systems, Cancun, Mexico, 23–27 January 2011.
[18]
Fujii, M.; Kawai, K.; Yoon, D.H.; Shoji, S. High speed generation of uniform femtoliter volume droplets using cascade multi-stage separation microfluidic device. In Proceedings of 23th International Microprocesses and Nanotechnology Conference, Fukuoka, Japan, 9–12 November 2010.
[19]
Yamada, M.; Doi, S.; Maenaka, H.; Yasuda, M.; Seki, M. Hydrodynamic control of droplet division in bifurcating microchannel and its application to particles synthesis. J. Colloid Interface Sci. 2008, 321, 401–407, doi:10.1016/j.jcis.2008.01.036.
[20]
Yoon, D.H.; Wakui, D.; Sekiguchi, T.; Shoji, S. Selective droplet sampling flow system using minimum number of horizontal pneumatic valves formed by single step pdms molding. In Proceedings of the 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Groningen, The Netherlands, 3–7 October 2010.
