Solid polymer electrolytes (SPEs) of polyacrylamide-co-acrylic acid (PAA) as the polymer host and zinc acetate (ZnA) as an ionic dopant were prepared using a single solvent by the solution casting technique. The amorphous and crystalline structures of film were investigated by X-ray diffraction (XRD). The surface morphology of samples was examined by scanning electron microscopy (SEM). The composition and complex formation of films were characterized by Fourier transform infrared (FTIR) spectroscopy. The conductivity of the PAA-ZnA films was determined by electrochemical impedance spectroscopy. According to the XRD and FTIR analyses, all electrolyte films were in amorphous state and the existence of interaction between Zn2+ cations and the PAA structure confirms that the film was successfully prepared. The SEM observations reveal that the electrolyte films appeared to be rough and flat with irregularly shaped surfaces. The highest ionic conductivity (σ) of 1.82 × 10-5 Scm-1 was achieved at room temperature (303 K) for the sample containing 10 wt % ZnA.
References
[1]
Wright, P.V. (1975) Electrical Conductivity in Ionic Complexes of Poly(ethylene oxide). British Polymer Journal, 7, 319-324. http://dx.doi.org/10.1002/pi.4980070505
[2]
Dillip, K.P., Choudhary, R.N.P. and Samantaray, B.K. (2008) Studies of Dielectric Relaxation and AC Conductivity Behavior of Plasticized Polymer Nanocomposite Electrolytes. International Journal of Electrochemical Science, 3, 597-608.
[3]
Wieczorek, W. and Stevens, J.R. (1997) Impedance Spectroscopy and Phase Structure of Polyether-Poly(methylme- thacrylate)-LiCF3SO3 Blend-Based Electrolytes. The Journal of Physical Chemistry B, 101, 1529-1534.
http://dx.doi.org/10.1021/jp962517w
[4]
Przyluski, J. and Wieczorek, W. (1989) Increasing the Conductivity of Polymer Solid Electrolytes: A Review. Solid State Ionics, 36, 165-169. http://dx.doi.org/10.1016/0167-2738(89)90163-X
[5]
Cherng, J.Y., Munshi, M.Z.A., Owens, B.B. and Smyrl, W.H. (1988) Applications of Multivalent Ionic Conductors to Polymeric Electrolyte Batteries. Solid State Ionics, 28, 857-861. http://dx.doi.org/10.1016/S0167-2738(88)80159-0
[6]
Hassan, M.F. and Arof, A.K. (2005) Ionic Conductivity in PEO-KOH Polymer Electrolytes and Electrochemical Cell Performance. Physica Statue Solidi-A, 222, 2494-2500. http://dx.doi.org/10.1002/pssa.200521188
[7]
Wieczorekk, W., Such, K., Florjanczyk, Z. and Stevens, J.R. (1995) Polyacrylamide Based Composite Polymeric Electrolytes. Electrochimica Acta, 40, 2417-2420. http://dx.doi.org/10.1016/0013-4686(95)00206-T
[8]
Lan, Z., Wu, J., Lin, J., Huang, M., Yin, S. and Sato, T. (2007) Influence of Molecular Weight of PEG on the Property of Polymer Gel Electrolyte and Performance of Quasi-Solid-State Dye-Sensitized Solar Cells. Electrochimica Acta, 52, 6673-6678. http://dx.doi.org/10.1016/j.electacta.2007.04.076
[9]
Stamenkovic, J.V., Premovic, P.I. and Mentus, S.V. (1997) Electrical Conductivity of Poly(acrylic acid) Gels. Journal of the Serbian Chemical Society, 62, 945-950.
[10]
Huh, P., Yan, F., Li, L., Kim, M., Mosurkal, R., Samuelson, L.A. and Kumar, J. (2008) Simple Fabrication of Zinc Oxide Nanostructures. Journal of Materials Chemistry, 18, 637-639. http://dx.doi.org/10.1039/b715334a
[11]
Liu, J.J., Yu, M.H. and Zhou, W.L. (2005) Well-Aligned Mn-Doped ZnO Nanowires Synthesized by a Chemical Vapor Deposition Method. Applied Physics Letters, 87, 172505. http://dx.doi.org/10.1063/1.2084321
[12]
Brostow, W., Casta?o, V.M., Huanosta, A., Icaza, M.D., Nicho, M.E. and Saniger, J.M. (1999) Poly(acrylic acid) + Zinc Diacetate Composites: High Temperature Service and Electric Conductivity. Materials Research Innovations, 3, 85-91. http://dx.doi.org/10.1007/s100190050130
[13]
Uslu, I., Baser, B., Yayli, A. and Aksu, M.L. (2007) Preparation and Characterization of PVA/Zinc Acetate/Boron Composite Fibers. e-Polymers, 145, 1-6.
[14]
Kangwansupamonkon, W., Jitbunpot, W. and Kiatkamjornwong, S. (2010) Photocatalytic Efficiency of TiO2/Po- ly[acrylamide-co-(acrylic acid)] Composite for Textile Dye Degradation. Polymer Degradation and Stability, 95, 1894-1902. http://dx.doi.org/10.1016/j.polymdegradstab.2010.04.019
[15]
Nava, R., Halachev, T., Rodriguez, R. and Castano, V.M. (2002) Synthesis, Characterization and Catalytic Behavior of a Zinc Acetate Complex Immobilized on Silica-Gel. Applied Catalysis A: General, 231, 131-149.
http://dx.doi.org/10.1016/S0926-860X(02)00072-8
[16]
Zendehdel, M., Barati, A. and Alikhani, H. (2011) Removal of Heavy Metals From Aqueous Solution by Poly(acry- lamide-co-acrylic acid) Modified with Porous Materials. Polymer Bulletin, 67, 343-360.
http://dx.doi.org/10.1007/s00289-011-0464-5
[17]
Sequeira, C.A.C., Plancha, M.J.C. and Araujo, L.P.S. (1994) Conductivity Studies on Solid Polymer Electrolytes. Journal de Physique IV France, 4, C1-17-C1-35.
[18]
Khiar, A.S.A. and Arof, A.K. (2010) Conductivity Studies of Starch-Based Polymer Electrolytes. Ionics, 16, 123-129.
http://dx.doi.org/10.1007/s11581-009-0356-y
[19]
Bindu, G., Lonappan, A., Thomas, V., Aanandan, C.K. and Mathew, K.T. (2006) Dielectric Studies of Polyvinyl-Ace- tate-Based Phantom for Applications in Microwave Medical Imaging. Journal of Materials Science, 41, 7419-7424.
http://dx.doi.org/10.1007/s10853-006-0793-1
[20]
Khiar, A.S.A., Puteh, R. and Arof, A.K. (2006) Characterizations of Chitosan-Ammonium Triflate (NH4CF3SO3) Com- plexes by FTIR and Impedance Spectroscopy. Physica Statue Solidi-A, 203, 534-543.
http://dx.doi.org/10.1002/pssa.200521016
[21]
Ramesh, S. and Arof, A.K. (2001) Ionic Conductivity Studies of Plasticized Poly(vinyl chloride) Polymer Electrolytes. Materials Science and Engineering: R: Reports, 85, 11-15. http://dx.doi.org/10.1016/S0921-5107(01)00555-4
[22]
Choudhary, S. and Sengwa, R.J. (2011) Dielectric Relaxation Spectroscopy and Ion Conduction in Poly(ethylene oxide)-Blend Salts-Montmorillonite Nanocomposite Electrolytes. Indian Journal of Pure & Applied Physics, 49, 204- 213.
[23]
Deen, L.M.S.E. and Elkholy, M.M. (2002) The Dielectric Polarizability of Amorphous Cu2O-Bi2O3 Glasses. Complexity, 9, 1-17.
