基于偏置抛物面天线结构设计方法的研究
Study on Structural Design Method of Offset Parabolic Reflector Antennas

DOI: 10.12677/JA.2014.34005, PP. 31-38

Keywords: 偏置抛物面天线，有效面积，坐标系变换
Offset Reflector Antennas, Effective Area, Coordinate Transformation

Full-Text   Cite this paper   Add to My Lib

Abstract:

偏置抛物面天线避免了馈源的遮挡损耗，使得天线效率提高，同时也具有结构简单的优点，在现代卫星通信地面固定站中广泛使用。本文提出一种偏置抛物面天线结构设计的方法，与传统的设计方法相比较，在限定的物理尺寸下，能够保证天线具有最大的有效面积。本文还将对截取的抛物面进行坐标系变换的推导求解。
The offset reflector antennas avoid blocking the feed of cover loss, improving the efficiency of the antenna with simple structure, and are applied widely in fixed ground station of modern satellite communications. This paper presents a way of designing an offset reflector antenna. Comparing with classical method, the antenna designed in this paper can make sure that it has the maximum effective area under limited physical size. The coordinate transformation of the intercepted ref-lector is also carried out in this paper.

References

[1]	徐曙斌, 陈庚超 (2013) 抛物面天线结构的优化设计. 电子机械工程, 1, 23-26.
[2]	朱本志 (2014) 圆口径正馈抛物面天线的分析与优化. 南京理工大学, 南京.
[3]	米宏伟, 常立新 (2012) 机载0.45 m卫星通信天线结构设计. 电讯技术, 7, 1143.
[4]	汪泉弟, 罗宏伟 (2013) 旋转抛物面天线馈源相位中心的仿真分析. 重庆大学学报, 4, 45-50.
[5]	林昌禄 (2002) 天线工程手册. 电子工业出版社, 北京, 5-24.
[6]	[美] Niku, S.B., 著 (2004) 机器人学导论——分析、系统及应用. 孙福春, 朱纪洪, 刘国栋, 等, 译, 电子工业出版社, 北京, 36-154.

Full-Text