高晓敏,张协平,王晓明. 离合器摩擦片非稳态温度场的计算[J]. 传动技术,1994(3):18-26.Gao Xiao-min,Zhang Xie-ping,Wang Xiao-ming. Numerical investigation determination transient temperature field in friction of clutch[J]. Drive System Technology,1994(3):18-26.
[2]
林腾蛟, 李润方, 杨成云,等. 湿式摩擦离合器瞬态热传导过程数值仿真[J]. 机械科学与技术,2003,22(1):39-41.Lin Teng-jiao,Li Run-fang,Yang Cheng-yun,et al. Numerical simulation of transient heat transfer process of wet friction clutch[J]. Mechanical Science and Technology,2003,22(1):39-41.
[3]
赵家昕,马彪,李和言,等.车辆离合器局部高温区成因及影响因素理论研究[J]. 北京:北京理工大学学报,2013,33(12):1234-1238.Zhao Jia-xin,Ma Biao,Li He-yan,et al. Research on the hot spots and thermodelastic instablility of automotive clutches[J]. Transactions of Beijing Institute of Technology,2013,33(12):1234-1238.
[4]
马彪,赵家昕,陈漫,等. 摩擦材料特性对离合器热弹性不稳定性的影响[J]. 机械工程学报,2014,50(8):111-118.Ma Biao,Zhao Jia-xin,Chen Man,et al.Effect of friction material properties on thermoelastic instablilyty of clutches[J]. Journal of Mechanical Engineering,2014,50(8):111-118.
[5]
Anderson A E,Knapp R A. Hot spotting in automotive friction systems[C]∥International Conference on Wear of Materials,1989:673-680.
[6]
Barber J R. Thermoelastic instabilities in the sliding of conforming solids[J]. Proc Roy Soc,1969,A312:381-394.
[7]
Lee K J,Barber J R. Frictionally-excited thermoelastic instability in automotive disk brakes[J]. ASME J Tribol,1993,115:607-614.
[8]
Hartsock D L,Fash J W. Effect of pad/caliper stiffness, pad thickness, and pad length on thermoelastic instability in disk brakes[J]. ASME J Tribol,2000,122:511-518.
[9]
Yi Y B,Barber J R,Zagrodzki P. Eigenvalue solution of thermoelastic instability problems using Fourier reduction[J]. Proc Roy Soc,2000,A456:2799-2821.
[10]
Zhao J,Ma B,Li H,et al.The effect of lubrication film thickness on thermoelastic instability under fluid lubricating condition[J]. Wear,2013,303(1):146-153.
[11]
Jang J Y,Khonsari M M. Thermoelastic instability with consideration of surface roughness and hydrodynamic lubrication[J]. ASME J Tribol,2000,122:725-732.
[12]
曲在纲,黄月初. 粉末冶金摩擦材料[M]. 北京:冶金工业出版社,2005.
[13]
Patir N,Cheng H S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J]. ASME J Lubr Technol,1979,101:220-230.
[14]
Greenwood J A,Williamson J B P. Contact of nominally flat surfaces[J]. Proc Roy Soc,1966,295:300-319.
