全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
电子学报  2015 

不确定退化测量数据下的剩余寿命估计

DOI: 10.3969/j.issn.0372-2112.2015.01.006, PP. 30-35

Keywords: 剩余寿命估计,退化模型,不确定测量,Kalman滤波

Full-Text   Cite this paper   Add to My Lib

Abstract:

剩余寿命估计是工程系统预测与健康管理的关键.目前,基于观测的系统退化数据进行剩余寿命估计得到了很大的关注.由于系统随机退化过程和测量误差的影响,测量数据中不可避免包含退化随机性和测量不确定性.然而,现有基于观测数据的剩余寿命估计研究中,没有将退化随机性和测量不确定性对估计的剩余寿命分布的影响同时考虑.鉴于此,提出了一种基于Wiener过程且同时考虑随机退化和不确定测量的退化建模方法,利用Kalman滤波技术,实现了潜在退化状态的实时估计.在退化状态估计的基础上,得到了同时考虑退化状态不确定性和测量不确定性的解析剩余寿命分布.此外,提出了一种基于极大似然方法的退化模型参数估计方法.最后,通过陀螺仪的退化测量数据验证了本文提出的方法优于不考虑测量不确定性的方法,可以提高剩余寿命估计的准确性.

References

[1]  Meeker W Q,Escobar L A.Statistical Methods for Reliability Data[M].New York:John Wiley & Sons,1998.
[2]  陈亮,胡昌华.基于退化建模的可靠性分析研究现状 [J].控制与决策,2009,24(9):1281-1287. Chen Liang,Hu Changhua.Review of reliability analysis methods based on degradation modelling[J].Control and Decision,2009,24(9):1281-1287.(in Chinese)
[3]  Si X S,Wang W,Hu C H,et al.Remaining useful life estimation based on a nonlinear diffusion degradation process[J].IEEE Transactions on Reliability,2012,61(1):50-67.
[4]  Si X S,Wang W,Hu C H,et al.Remaining useful life estimation-A review on the statistical data driven approaches[J].European Journal of Operational Research,2011,213(1):1-14.
[5]  Gebraeel N,Lawley M A,Li R,et al.Residual-life distributions from component degradation signals:A Bayesian approach[J].IIE Transaction,2005,37(3):543-557.
[6]  Si X S,Wang W,Chen M Y,et al.A Wiener-process-based degradation model with a recursive filter algorithm for remaining useful life estimation[J].Mechanical Systems and Signal Processing,2013,35(1-2):219-237.
[7]  Si X S,Wang W,Chen M Y,et al.A degradation path-dependent approach for remaining useful life estimation with an exact and closed-form solution[J].European Journal of Operational Research,2013,226(1):53-66.
[8]  Whitmore G A.Estimating degradation by a Wiener diffusion process subject to measurement error[J].Lifetime Data Analysis,1995,1:307-319.
[9]  Peng C Y,Tseng S T.Mis-specification analysis of linear degradation models[J].IEEE Transactions on Reliability,2009,58(3):444-455.
[10]  司小胜,胡昌华,周东华.带测量误差的非线性退化过程建模与剩余寿命估计 [J].自动化学报,2013,39(5):530-541. Si Xiaosheng,Hu Changhua,Zhou Donghua.Nonlinear degradation process modeling and remaining useful life estimation subject to measurement error[J].Acta Automatica Sinica,2013,39(5):530-541.(in Chinese)
[11]  彭宝华,周经伦,冯静,刘学敏.金属化膜脉冲电容器剩余寿命预测方法研究 [J].电子学报,2011,39(11):2674-2679. Peng Baohua,Zhou Jinglun,Feng Jing,Liu Xuemin.Residual lifetime prediction of metallized film pulse capacitors[J].Acta Electronica Sinica,2011,39(11):2674-2679.(in Chinese)
[12]  王小林,郭波,程志君.融合多源信息的维纳过程性能退化产品的可靠性评估 [J].电子学报,2012,40(5):977-982. Wang Xiaolin,Guo Bo,Cheng Zhijun.Reliability assessment of products with Wiener process degradation by fusing multiple information[J].Acta Electronica Sinica,2012,40(5):977-982.(in Chinese)

Full-Text

comments powered by Disqus

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133

WeChat 1538708413