The thermal properties of Light Emitting Diode (LED) products have a significant impact on their longevity and overall performance. Products which are unable to adequately dissipate heat degrade, shortening the projected lifespan. A testing apparatus has been constructed to characterize the thermal behavior of MR-16 LED products. This paper documents the testing setup and measurement results for 9 separate products, and identifies product characteristics which demonstrate higher success at heat dissipation. The thermal performance was quantified using experimental data and heat transfer models. Calculations to quantify the magnitude of heat transferred through radiation and convection in each LED product were performed. Results indicate some of the products are better optimized to enhance convection heat transfer.
References
[1]
Navigant Consulting Inc. (2010) Energy Savings Potential of Solid-State Lighting in General Illumination Applications 2010 to 2030. Technical Report February, US Department of Energy.
[2]
Pacific Northwest National Laboratory (2009) Thermal Management of White LEDs. Technical Report, US Department of Energy.
[3]
Chi, W.-H. and Chiang, K.-N. (2010) Light Degradation Prediction of High-Power Light-Emitting Diode Lighting Modules. 11th International Thermal, Mechanical & Multi-Phys-ics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE), Bordeaux, April 2010, 1-6.
[4]
Storey, T.J., Rackerby, R.E., Dillon, H.E. and Gingerich, L. (2016) Thermal Performance of Domestic Replacement A19 LED Lighting Products. American Society of Mechanical Engineers International Mechanical Engineering Conference, Phoenix, 11-17 November 2016, IMECE2016-67974.
[5]
Scholand, M.J. and Dillon, H.E. (2012) Life-Cycle Assessment of Energy and Environmental Impacts of LED Lighting Products. Part 2: LED Manufacturing and Performance. Technical Report, US DOE.
[6]
Tähkämö, L. and Dillon, H.E. (2014) Handbook of Advanced Lighting Technology. Springer International Publishing, Cham.
[7]
Cheng, T., Luo, X.B., Huang, S.Y. and Liu, S. (2010) Thermal Analysis and Optimization of Multiple LED Packaging Based on a General Analytical Solution. International Journal of Thermal Sciences, 49, 196-201. http://dx.doi.org/10.1016/j.ijthermalsci.2009.07.010
[8]
Luo, X. and Liu, S. (2007) A Microjet Array Cooling System for Thermal Management of High-Brightness LEDs. IEEE Transactions on Advanced Packaging, 30, 475-484. http://dx.doi.org/10.1109/TADVP.2007.898522
[9]
Chi, W.-H., Chou, T.-L., Han, C.-N., Yang, S.-Y. and Chiang, K.-N. (2010) Analysis of Thermal and Luminous Performance of MR-16 LED Lighting Module. IEEE Transactions on Components and Packaging Technologies, 33, 713-721. http://dx.doi.org/10.1109/TCAPT.2010.2073469
[10]
Bender, V.C., Iaronka, O. and Marchesan, T.B. (2013) Study on the Thermal Performance of LED Luminaire Using Finite Element Method. IECON 2013: 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, November 2013, 6099-6104.
[11]
Maaspuro, M. and Tuominen, A. (2013) Thermal Analysis of LED Spot Lighting Device Operating in External Natural or Forced Heat Convection. Microelectronics Reliability, 53, 428-434. http://dx.doi.org/10.1016/j.microrel.2012.10.004
[12]
Lee, Y. and Korpela, S.A. (1983) Multicellular Natural Convection in a Vertical Slot. Journal of Fluid Mechanics, 126, 91-121. http://dx.doi.org/10.1017/S0022112083000063
[13]
Chenoweth, D.R. and Paolucci, S. (1996) Natural Convection in an Enclosed Vertical Air Layer with Large Horizontal Temperature Differences. Journal of Fluid Mechanics, 169, 173-210. http://dx.doi.org/10.1017/S0022112086000587
[14]
Dillon, H.E., Emery, A.F. and Mescher, A.M. (2013) Analysis of Chaotic Natural Convection in a Tall Rectangular Cavity with Non-Isothermal Walls. Frontiers in Heat and Mass Transfer (FHMT), 4, 1-9.
[15]
Dillon, H.E., Emery, A.F. and Mescher, A.M. (2009) Benchmark Comparison of Natural Convection in a Tall Cavity. COMSOL User Conference, Boston, 8-10 October 2016, 1-10.
