The Huron River consists of alternating bedrock reaches and alluvial reaches. Analysis of historical aerial photography from 1950-2015 reveals six major channel avulsion events in the 8-km study area. These avulsions occurred in the alluvial reaches but were strongly influenced by the properties of the upstream bedrock reach (“inherited characteristics”). The bedrock reaches aligned with the azimuth of joint sets in the underlying bedrock. One inherited characteristic in the alluvial reach downstream is that the avulsion channels diverged only slightly from the orientation of the upstream bedrock channel (range 2° - 38°, mean and standard deviation 12.1° ± 13.7°). A second inherited characteristic is that avulsion channels were initiated from short distances downstream after exiting the upstream bedrock channel reach (range 62 - 266 m, mean and standard deviation 143.7 ± 71.0 m), which is a fraction of the meander wavelength (1.2 km). Field evidence shows that some avulsion channel sites were re-occupied episodically. In addition, two properties were necessary for channel avulsions: 1) avulsion events were triggered by channel-forming hydrologic events (5-year recurrence interval flows), but not every channel-forming hydrologic event resulted in an avulsion, and 2) channel sinuosity (P) increased to 1.72 - 1.77 prior to an avulsion then decreased to 1.65 - 1.70 following an avulsion, suggesting that P ≥ 1.72 is the “critical sinuosity” or triggering value for avulsions on the Huron River. In summary, for this river consisting of alternating bedrock and alluvial reaches, the bedrock reaches impose certain parameters on downstream alluvial reaches (including sediment supply, channel direction and avulsion channel position downstream after exiting a bedrock reach) while adjustments in sinuosity and sediment storage occur in the alluvial reaches.
References
[1]
Tinker, K. and Wohl, E.E. (1998) A Primer on Bedrock Channels. In: Tinker, K. and Wohl, E.E., Eds., Rivers over Rock: Fluvial Processes in Bedrock Channels, American Geophysical Union, Washington DC, 1-18.
[2]
Whipple, K.X. (2004) Bedrock Rivers and the Geomorphology of Active Orogens. Annual Reviews of Earth and Planetary Sciences, 32, 151-185. https://doi.org/10.1146/annurev.earth.32.101802.120356
[3]
O’Connor, J.E., Mangano, J.F., Anderson, S.W., Wallick, J.R., Jones, K.L. and Keith, M.K. (2014) Geologic and Physiographic Controls on Bed-Material Yield, Transport, and Channel Morphology for Alluvial and Bedrock Rivers, Western Oregon. Geological Society of America Bulletin, 126, 377-397. https://doi.org/10.1130/B30831.1
[4]
Baker, V.R. (1984) Flood Sedimentation in Bedrock Fluvial Systems. In: Koster, E.H. and Steel, R.J., Eds., Sedimentology of Gravels and Conglomerates, Canadian Society of Petroleum Geologists, Memoir 10, 87-98.
[5]
Cenderelli, D.A. and Cluer, B.L. (1998) Depositional Processes and Sediment Supply in Resistant-Boundary Channels: Examples from Two Case Studies. In: Tinker, K. and Wohl, E.E., Eds., Rivers over Rock: Fluvial Processes in Bedrock Channels, American Geophysical Union, Washington DC, 105-131. https://doi.org/10.1029/GM107p0105
[6]
Tinker, K.J. and Parrish, J. (1998) Recent Adjustments to the Long Profile of Cooksville Creek, an Urbanized Bedrock Channel in Mississauga, Ontario. In: Tinker, K. and Wohl, E.E., Eds., Rivers over Rock: Fluvial Processes in Bedrock Channels, American Geophysical Union, Washington DC, 167-187. https://doi.org/10.1029/GM107p0167
[7]
Whipple, K.X., Hancock, G.S. and Anderson, R.S. (2000) River Incision into Bedrock: Mechanics and Relative Efficiency of Plucking, Abrasion, and Cavitation. Geological Society of America Bulletin, 112, 490-503. https://doi.org/10.1130/0016-7606(2000)112<490:RIIBMA>2.0.CO;2
[8]
Jansen, J.D. and Brierley, G.J. (2004) Pool-Fills: A Window to Palaeoflood History and Response in Bedrock-Confined Rivers. Sedimentology, 51, 901-925. https://doi.org/10.1111/j.1365-3091.2004.00643.x
[9]
Wohl, E.E. (1992) Bedrock Benches and Boulder Bars: Floods in the Burdekin Gorge of Australia. Geological Society of America Bulletin, 104, 770-778. https://doi.org/10.1130/0016-7606(1992)104<0770:BBABBF>2.3.CO;2
[10]
Sklar, L.S. and Dietrich, W.E. (2001) Sediment and Rock Strength Controls on River Incision into Bedrock. Geology, 29, 1087-1090. https://doi.org/10.1130/0091-7613(2001)029<1087:SARSCO>2.0.CO;2
[11]
Baker, V.R. and Pickup, G. (1987) Flood Geomorphology of the Katherine Gorge, Northern Territory, Australia. Geological Society of America Bulletin, 98, 635-646. https://doi.org/10.1130/0016-7606(1987)98<635:FGOTKG>2.0.CO;2
[12]
Ouimet, W.B., Whipple, K.X., Royden, L.H., Sun, Z. and Chen, Z. (2007) The Influence of Large Landslides on River Incision in a Transient Landscape: Eastern Margin of the Tibetan Plateau (Sichuan, China). Geological Society of America Bulletin, 119, 1462-1476. https://doi.org/10.1130/B26136.1
[13]
Montgomery, D.R., Abbe, T.B., Buffington, J.M., Peterson, N.P., Schmidt, K.M. and Stock, J.D. (1996) Distribution of Bedrock Alluvial Channels in Forested Mountain Drainage Basins. Nature, 381, 587-589. https://doi.org/10.1038/381587a0
[14]
Collins, B.D., Montgomery, D.R., Schanz, S.A. and Larsen, I.J. (2016) Rates and Mechanisms of Bedrock Incision and Strath Terrace Formation in a Forested Catchment, Cascade Range, Washington. Geological Society of America Bulletin, 128, Article ID: B31340. https://doi.org/10.1130/B31340.1
[15]
Schumm, S.A. (1977) The Fluvial System. John Wiley and Sons, New York, 338 p.
[16]
Tooth, S., Rodnight, H., Duller, G.A.T., McCarthy, T.S., Marren, P.M. and Brandt, D. (2007) Chronology and Controls of Avulsion along a Mixed Bedrock-Alluvial River. Geological Society of America Bulletin, 119, 452-461. https://doi.org/10.1130/B26032.1
[17]
Smith, N.D., Cross, T.A., Dufficy, J.P. and Clough, S.R. (1989) Anatomy of an Avulsion. Sedimentology, 36, 1-23. https://doi.org/10.1111/j.1365-3091.1989.tb00817.x
[18]
Jones, L.S. and Harper, J.T. (1998) Channel Avulsions and Related Processes, and Large-Scale Sedimentation Patterns Since 1875, Rio Grande, San Luis Valley, Colorado. Geological Society of America Bulletin, 110, 411-421. https://doi.org/10.1130/0016-7606(1998)110<0411:CAARPA>2.3.CO;2
[19]
Jones, L.S. and Schumm, S.A. (1999) Causes of Avulsion: An Overview. In: Smith, N.D. and Rogers, J., Eds., Fluvial Sedimentology VI, International Association of Sedimentologists, Special Publication 28, 179-278. https://doi.org/10.1002/9781444304213.ch13
[20]
Slingerland, R. and Smith, N.D. (2004) River Avulsions and Their Deposits. Annual Review of Earth and Planetary Sciences, 32, 257-285. https://doi.org/10.1146/annurev.earth.32.101802.120201
[21]
Ohio Environmental Protection Agency (2005) Total Maximum Daily Loads for the Huron River Watershed. Ohio Environmental Protection Agency, Huron River TMDL Program, Columbus, 97 p.
[22]
U.S. Geological Survey—National Water Information System (2016) Data for Gage 04199000. https://waterdata.usgs.gov/nwis/uv?site_no=04199000
[23]
Potucek, M.J. (2017) Channel Change Processes and Rates in a Mixed Alluvial-Bedrock River, Huron River, North-Central Ohio (U.S.A.). M.S. Thesis, Bowling Green State University, Bowling Green, 190 p.
[24]
Schwietering, F. (1979) Devonian Shales of Ohio and Their Eastern and Southern Equivalents. U.S. Department of Energy, Report METC/CR-79/2, Washington DC, 73 p.
[25]
Coogan, A.H. (1996) Ohio’s Surface Rocks and Fossils. In: Feldman, R.M. and Hackathon, M., Eds., Fossils of Ohio, Ohio Department of Natural Resources, Division of Geological Survey, Bulletin 70, Columbus, 31-50.
[26]
Evans, J.E., Huxley, J.M. and Vincent, R.K. (2007) Upstream Channel Changes Following Dam Construction and Removal Using a GIS/Remote Sensing Approach. Journal of the American Water Resources Association, 43, 1-15. https://doi.org/10.1111/j.1752-1688.2007.00055.x
[27]
Neill, C.R. (1973) Hydraulic and Morphologic Characteristics of the Athabasca River near Fort Assiniboine. Alberta Research Council, Edmonton, Highway and River Engineering Division Report REH/73/3, 23.
[28]
Church, M. (1983) Pattern Instability in a Wandering Gravel Bed Channel. In: Collinson, J.D. and Lewin, J., Eds., Modern and Ancient Fluvial Systems, International Association of Sedimentologists, Special Publication 6, Oxford, 169-180. https://doi.org/10.1002/9781444303773.ch13
[29]
ASTM (2017) E11-17 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves. ASTM International, West Conshohocken. http://www.astm.org
[30]
Folk, R.L. (1968) Petrology of Sedimentary Rocks. Hemphill’s, Austin Texas, 194 p.
[31]
Miall, A.D. (1977) A Review of the Braided River Environment. Earth Science Reviews, 13, 1-62. https://doi.org/10.1016/0012-8252(77)90055-1
[32]
Nemec, W. (1988) The Shape of the Rose. Sedimentary Geology, 59, 149-152. https://doi.org/10.1016/0037-0738(88)90105-4
[33]
Krause, R.G.F. and Geijer, T.A.M. (1987) An Improved Method for Calculating the Standard Deviation and Variance of Paleocurrent Data. Journal of Sedimentary Petrology, 57, 779-780. https://doi.org/10.1306/212F8C3D-2B24-11D7-8648000102C1865D
[34]
Curray, J.R. (1956) The Analysis of Two-Dimensional Orientation Data. Journal of Geology, 64, 117-131. https://doi.org/10.1086/626329
[35]
Hooke, J.M. (2004) Cut-Offs Galore! Occurrence and Causes of Multiple Cutoffs on a Meandering River. Geomorphology, 61, 225-238. https://doi.org/10.1016/j.geomorph.2003.12.006
