The main objective of this study is to contribute to the optimization of the formulation of sand concretes and its valorisation according to natural sands from different quarries or extraction sites. Physical characteristics of natural sands have been determined and improved by the addition of crushing sand, taking into account the too fine elements of the sand. Four types of sand were used (Congo River, Djiri, Mfilou, crushed sand). The concrete formulations proposed from improved sands (30% crushed sand and 70% natural sand) reveal an increase in mechanical strength. Thus, it appeared that this improvement of the natural fine sands by the crushing sand has brought a clear increase in the maneuverability of the concretes and the physico-mechanical characteristics of nearly 50%, although this crushing sand has a sand equivalent value of less than 70%. These results augur well for the durability of structures in the construction industry in Congo.
References
[1]
Keinde, D., Sene, N.A., Mamadou, D. and Gueye, P.M. (2017) Study of Sand Concrete from Senegal. Revue du CAMES-Sciences Appliquées et de l’Ingénieur, 2, 29-36.
[2]
Dupain, R., Lanchon, R. and Saint-Arron, J.C. (2004) Granulats, sols, ciment et bétons. Caractérisation des matériaux de génie civil par les essais de laboratoire, Nouvelle édition conforme aux normes européennes, BAC, BTS, DUT, Collection A. Capliez-Edition CASTEILLA. École Française du béton, 236 p.
[3]
Dreux, G. and Festa, J. (1998) Nouveau guide du béton et de ses constituants, Huitième édition, Troisième tirage 2007, EYROLLES Ed., Paris.
[4]
Poinot, T. (2013) Influence des hydroxypropylguars sur les propriétés des mortiers de ciment à l’état frais. Autre. école Nationale Supérieure des Mines de Saint-Etienne.
[5]
Selma, L. (2015) Université Mohamed Khider-Biskra Faculté des Sciences et de la technologie Département: De génie civil et hydraulique: Effets desadjuvants fluidifiants sur les Caractéristiques physico-mécaniques et Rhéologiques des mortiers a base des sables des Carrières.
[6]
Cimbéton (2005) Les constituants des bétons et des mortiers. chapitre 2. Paris. Septembre.
[7]
Nicot Pierre, M. (2008) Interactions mortier-support: éléments déterminants des performances et de l’adhérence d’un mortier, thèse de doctorat, université de Toulouse.
[8]
Benabed, B., Azzouz, L., El-hadj, K., Eddine, A.S. and Belaidi, H.S. (2012) Propriétés physico-mécaniques et durabilité des mortiers à base du sable de dunes, université d’Amar Telidji de Laghouat, Algérie.
[9]
Pettang, C., Vermande, P. and Zimmermann, M. (1995) Impact du secteur informel dans la production de l’habitat au Cameroun. 21 p.
[10]
Turcy, P. and Loukili, A. (2003) Différentes approches pour la formulation des bétons autoplaçants. Revue Française de Génie Civil, 7, 425-450.
https://doi.org/10.1080/12795119.2003.9692503
http://hal.Archives-ouerts.fr/hal-01006744
[11]
Benaissa, A., Morlier, P. and Tram, V. (n.d.) Le béton de sable un matériau non fissurant. Matériaux. http://www.entp.edu.dz
[12]
Guendouz, M., Debielo, F. and Kadri, E.H. (2015) Formulation et caractérisation d’un béton de sable à base de déchets plastiques. 33èmes rencontres de l’AUGC, ISABTP/UPPA, Anglet, 27 au 29 Mai 2015.
[13]
Guettala, A., Mezghiche, B. and Chebili, R. (1999) Strengh Comparisons between Polled sand Concrete and Dune Sand Concrete. Courrier du savoir, No. 2, 85-89.
[14]
Bedenina, M., Mouldi Mouldi, K., Dheilly, R.M. and Quemendec, M. (2005) Rense of Local Sand: Effect of Limestone Filler Proportion on the Rheological and Mechanical. Cement and Concrete Research, 35, 1172-1179.
https://doi.org/10.1016/j.cemconres.2004.07.006
[15]
El Euch Khay, S., Neji, J. and Loulizi, A. (2010) Compacted Sand Concrete in Pavement Construction: An Economical and Environment Solution. International Concrete Abstracts Portal, 107, 195-202. https://doi.org/10.14359/51663583
[16]
Béton de sable-caractéristiques et pratiques d’utilisation (1996) Projet national de recherche et de développement SABOCRETE. Presses de l’ENPC.
[17]
El Euch Khay, S., Neji, J. and Loulizi, A. (2010) Shrinkage Properties of Compacted Sand Concrete Used in Pavements. Construction and Building Materials, 24, 1790-1795. https://doi.org/10.1016/j.conbuildmat.2010.02.008
[18]
Jaballah Slaoui, A. and El Euch Khay, S. (2014) Valorisation du béton de sable dans le secteur du batiment.
https://www.researchgate.net/publication/318760988-valorisation
[19]
Abdeljalil, Z. and Abriak, N.E. (2009) étude de formulation d’un béton de sable à base de sable de dragage.
[20]
Hasdemir, S., Tuguil, A. and Yilmaz, M. (2016) The Effect of Natural Sand Composition on Concrete Strength. Construction and Building Materials, 112, 940-948.
https://doi.org/10.1016/j.conbuildmat.2016.02.188
[21]
Sankh, A.C., Biradar, P.M., Naghathan, S. and Ishmargol, M.B. (2014) Recent Trends in Replacement of Natural Sand with Different Alternatives. IOSR Journal of Mechanical and Civil Engineering, 59-66.
[22]
Hamid Mir, A. (2015) Improved Concrete Properties Using Quarry Dust as Replacement for Natural Sand. International Journal of Engineering Research and Development, 11, 46-52.
[23]
Natarayan, S. and Murugesan, P. (2019) Synergistic Effect of Marble Powder and Green Sand of the Mechanical Properties of Metakaolin-Cement Concrete. Materials, 12, 476. https://doi.org/10.3390/ma12030476
[24]
Opara, H.E., Eziefula, U.G. and Eziefula, B.I. (2018) Comparison of Physical and Material Properties of River Sand Concrete with Quarry Dust Concrete. Journal of Civil Engineering, 13, 127-134. https://doi.org/10.1515/sspjce-2018-0012
[25]
Joel, M. (2010) Use of Crushed Granite Fine as Replacement to River Sand in Concrete Production. Leonardo Electronic Journal of Practices and Technologies, 9, 85-96.
[26]
Mandra, S., Sindhi, P.R., Chandwami, V., Nagar, R. and Agrawal, V. (2016) Crushed Rock Sand—An Economical and Ecological Alternative to Natural Sand to Optimize Concrete Mix. Perspectives in Science, 8, 345-347.
