This
work addresses the tensile properties of glass fiber reinforced polymers (GFRP)
and investigates the different ways of estimating them without the cost
associated with experimentation. This attempt is achieved through comparison
between experimental results, derived in accordance with the ASTM standards,
and results obtained using the mechanics of composite materials. The
experimental results are also compared to results derived from work by other
researchers in order to corroborate the findings regarding the correlation of
tensile properties of the GFRP material and the fiber volume fraction.
References
[1]
Polyzois, D., Raftoyiannis, I.G. and Philopoulos, D. (2007) An Experimental Survey of the Static and Dynamic Behavior of Jointed Composite GFRP Tapered Poles. Mechanics of Advanced Materials and Structures, 14, 203-212.
https://doi.org/10.1080/15376490600734849
[2]
Gay, D., Hoa, S.V. and Tsai, S.W. (2003) Composite Materials Design and Application. CRC Press LLC, London. https://doi.org/10.1201/9781420031683
[3]
Polyzois, D.J., Raftoyiannis, I.G. and Ungkurapinan, N. (2009) Static and Dynamic Characteristics of Multi-Cell Jointed GFRP wind Turbine Towers. Composite Structures, 90, 34-42. https://doi.org/10.1016/j.compstruct.2009.01.005
[4]
Raftoyiannis, I.G. and Polyzois, D.J. (2007) The Effect of Semi-Rigid Connections on the Dynamic Behavior of Tapered Composite GFRP Poles. Composite Structures, 81, 70-79. https://doi.org/10.1016/j.compstruct.2006.07.015
[5]
ASCE FRP Task Committee (2016) Pre-Standard for Utility Line Poles Made of FRP, Chapter Combined Edited.
[6]
ASTM D3039/D3039M-00 (2000) Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. ASTM International, West Conshohocken, PA.
[7]
ASTM D3518/D3518M-94 (2001) Standard Test Method for in-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate. ASTM International, West Conshohocken, PA.
[8]
Horlle de Oliveira, F., Helfer, A.L. and Amico, S.C. (2012) Mechanical Behavior of Unidirectional Curaua Fiber and Glass Fiber Composites. Macromolecular Symposia, 319, 83-92. https://doi.org/10.1002/masy.201100202
[9]
Gupta, G., Gupta, A., Dhanola, A. and Raturi, A. (2016) Mechanical Behavior of Glass Fiber Polyester Hybrid Composite Filled with Natural Fillers. IOP Conference Series: Materials Science and Engineering, 149, Article ID: 012091.
https://doi.org/10.1088/1757-899X/149/1/012091
[10]
Smith, K.J. (2005) Compression Creep of a Pultrudede-Glass/Polyestercomposite at Elevated Service Temperatures. Master of Science Thesis, Georgia Institute of Technology, Atlanta, GA.
[11]
Bramante, G., Bertucelli, L., Benvenuti, A. and Meyer, K.J. (2014) Polyurethane Composites: A Versatile Thermo-Set Polymer Matrix for Abroad Range of Applications. Polyurethanes 2014, Polyurethanes Technical Conference, Dallas, TX, 22-24 September 2014, 507-522.
[12]
Kollar, L.P. and Springer, G.S. (2003) Mechanics of Composite Structures. Cambridge University Press, Cambridge.