|
|
- 2019
氧化石墨烯/聚酰亚胺复合薄膜的制备及阻水性能
|
Abstract:
以石墨粉为原料，采用改进的Hummers法制备氧化石墨烯（GO），采用原位聚合法制备GO/聚酰亚胺酸（PAA）前驱体，GO/PAA前驱体经高温固化处理后得到GO/聚酰亚胺（PI）复合薄膜；采用XRD、Raman、FTIR、AFM等表征手段对GO的结构进行表征；此外，研究了不同固化温度下PI薄膜的结构；最后测试了GO/PI复合薄膜的透湿率和力学性能。结果表明：GO为单层结构，厚度为1.26 nm。GO/PI复合薄膜表现出良好的阻水性能，当GO/PI复合薄膜中GO的添加量为0.025wt%、薄膜厚度为50 μm时，GO/PI复合薄膜的透湿率低至56.7 g（m2·d）-1。此外，0.025wt% GO/PI复合薄膜拉伸强度和断裂伸长率分别为150.8 MPa和13.5%，与PI薄膜（分别为126.9 MPa和8.1%）相比，分别增加了18.8%和66.7%。 Graphene oxide (GO) was prepared by the modified Hummers method with graphite powder as the raw material. The GO/polyamic acid (PAA) precursor was synthesized by in-situ polymerization, and further imidized into GO/polyimide(PI) film by heating. The GO was characterized by XRD, Raman, FTIR and AFM, and the structure of PI films at different curing temperatures was studied. Then, the water vapor transmission rate and mechanical properties of GO/PI film were tested. The results reveal that the GO has a single layer structure with its thickness of 1.26 nm. The GO/PI composite film exhibites good water resistance performance. The water vapor transmission rate of the GO/PI composite film (thickness of the film is 50 μm) containing 0.025wt% GO is as low as 56.7 g(m2·d)-1. The mechanical properties measurements suggest that the tensile strength and the elongation at break of the 0.025wt%GO/PI composite film are 150.8 MPa and 13.5%, respectively, increasing by 18.8% and 66.7% as compared to that of PI film (126.9 MPa and 8.1%). 国家自然科学基金（51673160）；西南科技大学研究生创新基金（17ycx015
| [1] | 黄伟九, 叶峰, 赵远, 等. 空心微珠-碳纤维共混改性聚酰亚胺复合材料的摩擦学性能[J]. 复合材料学报, 2013, 30(4):59-65. HUANG W J, YE F, ZHAO Y, et al. Tribological properties of cenosphere and carbon fiber reinforced polyimide composites[J]. Acta Materiae Compositae Sinica, 2013, 30(4):59-65(in Chinese). |
| [2] | PEI X, ZHAI W, ZHENG W. Preparation and characterization of highly cross-linked polyimide aerogels based on polyimide containing trimethoxysilane side groups[J]. Langmuir, 2014, 30(44):13375-13383. |
| [3] | CHOI M C, KIM Y, HA C S. Polymers for flexible displays:From material selection to device applications[J]. Progress in Polymer Science, 2008, 33(6):581-630. |
| [4] | JIA L, SUM X, JIANG Y, et al. A novel MoSe2-reduced graphene oxide/polyimide composite film for applications in electrocatalysis and photoelectrocatalysis hydrogen evolution[J]. Advanced Functional Materials, 2015, 25(12):1814-1820. |
| [5] | HUANG T, LU R, SU C, et al. Chemically modified graphene/polyimide composite films based on utilization of covalent bonding and oriented distribution[J]. ACS Applied Materials & Interfaces, 2012, 4(5):2699-2708. |
| [6] | SCHRIVER M, REGAN W, GANNETT W J, et al. Graphene as a long-term metal oxidation barrier:Worse than nothing[J]. ACS Nano, 2013, 7(7):5763-5768. |
| [7] | LERF A, HE H, FORSTER M, et al. Structure of graphite oxide revisited[J]. The Journal of Physical Chemistry B, 1998, 102(23):4477-4482. |
| [8] | 国家技术监督局. 包装材料试验方法透湿率:GB/T 16928-1997[S]. 北京:中国标准出版社, 1998. State Bureau of Technological Supervision. Test method for vapor transmission rate of packaging materials:GB/T 16928-1997[S]. Beijing:China Standards Press, 1998(in Chinese). |
| [9] | 中国国家标准化管理委员会. 塑料拉伸性能的测定第3部分:薄膜和薄片的试验条件:GB/T 1040.3-2006[S]. 北京:中国标准出版社, 2007. Standardization Administration of the People's Republic of China. Plastics:Determination of tensile properties Part 3:Test conditions for films and sheets:GB/T 1040.3-2006[S]. Beijing:China Standards Press, 2007(in Chinese). |
| [10] | KIM H, MIURA Y, MACOSKO C W. Graphene/polyurethane nanocomposites for improved gas barrier and electrical conductivity[J]. Chemistry of Materials, 2010, 22(11):3441-3450. |
| [11] | GUO Y, BAO C, SONG L, et al. In situ polymerization of graphene, graphite oxide, and functionalized graphite oxide into epoxy resin and comparison study of on-the-flame behavior[J]. Industrial & Engineering Chemistry Research, 2011, 50(13):7772-7783. |
| [12] | TSENG I H, LIAO Y F, CHIANG J C, et al. Transparent polyimide/graphene oxide nanocomposite with improved moisture barrier property[J]. Materials Chemistry and Physics, 2012, 136(1):247-253. |
| [13] | UNSAL E, CAKMAK M. Real-time characterization of physical changes in polyimide film formation:From casting to imidization[J]. Macromolecules, 2013, 46(21):8616-8627. |
| [14] | YANG Y H, BOLLING L, PRIOLO M A, et al. Super gas barrier and selectivity of graphene oxide-polymer multilayer thin films[J]. Advanced Materials, 2013, 25(4):503-508. |
| [15] | 郝继璨, 鲁云华, 肖国勇, 等. 原位氨基化氧化石墨烯/聚酰亚胺复合材料的制备及性能[J]. 复合材料学报, 2018, 35(6):1377-1385. HAO J C, LU Y H, XIAO G Y, et al. Preparation and pro-perties of in-situ aminated graphene oxide/polyimide com-posites[J]. Acta Materiae Compositae Sinica, 2018, 35(6):1377-1385(in Chinese). |
| [16] | 杨婷婷, 周竹欣, 张艺, 等. 光致发光聚酰亚胺研究进展[J]. 高分子学报, 2017(3):411-428. YANG T T, ZHOU Z X, ZHANG Y, et al. Recent advances of photoluminescence polyimides[J]. Acta Polymerical Sinica, 2017(3):411-428(in Chinese). |
| [17] | FUKUKAWA K I, OKAZAKI M, SAKATA Y, et al. Rational approach for improving optical and mechanical pro-perties of transparent polyimide for FPC substrate[J]. Journal of Photopolymer Science & Technology, 2011, 24(3):255-258. |
| [18] | WANG T, CHENG C, WU L, et al. Fabrication of polyimide membrane incorporated with functional graphene oxide for CO2 separation:The effects of GO surface modification on membrane performance[J]. Environmental Science & Technology, 2017, 51(11):6202-6210. |
| [19] | 任芳, 朱光明, 任鹏刚. 纳米石墨烯复合材料的制备及应用研究进展[J]. 复合材料学报, 2014, 31(2):263-272. REN F, ZHU G M, REN P G. The lates advances in preparation and application of nano graphene composites[J]. Acta Materiae Compositae Sinica, 2014, 31(2):263-272(in Chinese). |
| [20] | 吴娟霞, 徐华, 张锦. 拉曼光谱在石墨烯结构表征中的应用[J]. 化学学报, 2014, 72(3):301-318. WU J X, XU H, ZHANG J. Raman spectroscopy of graphene[J]. Acta Chimica Sinica, 2014, 72(3):301-318(in Chinese). |
| [21] | SI Y, SAMULSKI E T. Synthesis of water soluble graphene[J]. Nano Letters, 2008, 8(6):1679-1682. |
| [22] | ABBASIA F, KARIMI-SABETB J, GHOTBIA C, et al. The effect of pH on lateral size and surface chemistry of graphene oxide[J]. Scientia Iranica, 2017, 24(6):3554-3559. |
| [23] | MARCANO D C, KOSYNKIN D V, BERLIN J M, et al. Improved synthesis of graphene oxide[J]. ACS Nano, 2010, 4(8):4806-4814. |
| [24] | 寇玉洁. 聚酰亚胺/石墨烯复合薄膜的制备及其碳化研究[D]. 哈尔滨:哈尔滨工业大学, 2015. KOU Y J. Preparation and carbonization of graphene/poliyimide composite[D]. Harbin:Harbin Institute of Technology, 2015(in Chinese). |
| [25] | ZHU J, LIM J, LEE C H, et al. Multifunctional polyimide/graphene oxide composites via in situ polymerization[J]. Journal of Applied Polymer Science, 2014, 131(9):40177. |
| [26] | COMPTON O C, KIM S, PIERRE C, et al. Crumpled graphene nanosheets as highly effective barrier property enhancers[J]. Advanced Materials, 2010, 22(42):4759-4763. |
| [27] | KIM H M, LEE J K, LEE H S. Transparent and high gas barrier films based on poly(vinyl alcohol)/graphene oxide composites[J]. Thin Solid Films, 2011, 519(22):7766-7771. |
| [28] | MIN C, NIE P, SONG H J, et al. Study of tribological pro-perties of polyimide/graphene oxide nanocomposite films under seawater-lubricated condition[J]. Tribology International, 2014, 80:131-140. |
| [29] | ZAMAN I, PHAN T T, KUAN H C, et al. Epoxy/graphene platelets nanocomposites with two levels of interface strength[J]. Polymer, 2011, 52(7):1603-1611. |
