|
|
在动静载荷作用下S型波纹管膜片非线性稳定性分析
|
Abstract:
研究了S型波纹管膜片的非线性稳定性问题，运用拟壳法将S型波纹管膜片当作有初挠度的圆环薄板的复合结构，利用薄壳的非线性弯曲理论，得到S型波纹管膜片在动静载荷作用下的非线性动力学方程组。在边界条件、连续条件下用Galerkin得到膜片非线性系统的受迫振动方程。用Floquet指数判断了该系统发生分叉的条件，讨论了系统在平衡点领域的稳定性问题。
he S-shaped bellows diaphragm is regarded as the combined structure of the circular plate with initial deflection by method of simulated shell. Using the nonlinear bending theory of thin shell, the nonlinear dynamic equations of the S-shaped bellows diaphragm under static-dynamic load are obtained. According to the boundary condition and continuous condition, the forced vibration equation of diaphragm nonlinear system is obtained by Galerkin. The conditions for bifurcation of the system were determined by using Floquet index, and the stability at the equilibrium point of the system was discussed.
| [1] | 张静, 丁雪兴, 黄义仿, 等. 干气密封焊接金属波纹管的结构动态分析[J]. 化工机械, 2010, 37(2): 183-185. |
| [2] | 刘静, 黄卫良, 李霄, 等. 单双层U形不锈钢波纹管液压胀形变形特征对比研究[J]. 锻压技术, 2016, 41(5): 24-28. |
| [3] | 高洪彪. 横向载荷下弯曲波纹管的变形与吸能特性[D]: [硕士学位论文]. 太原: 太原理工大学, 2016. |
| [4] | 阿斯耶姆？肖开提, 刘焕海. 焊接金属波纹管机械密封温度场及热变形有限元分析研究[J]. 科技视界, 2016(4): 25-26. |
| [5] | Faraji, G., Besharati, M.K., Mosavi, M., et al. (2008) Experimental and Finite Element Analysis of Parameters in Manufacturing of Metal Bellows. The International Journal of Advanced Manufacturing Technology, 38, 641-648.
https://doi.org/10.1007/s00170-007-1122-9 |
| [6] | Kumar Krovvidi, S.C.S.P., Padmakumar, G. and Bhaduri, A.K. (2016) Design and Analysis of Bellows for High Temperature Application as Per RCC-MR. Transactions of the Indian Institute of Metals, 69, 531-535.
https://doi.org/10.1007/s12666-015-0813-4 |
| [7] | Liang, H. (1993) On Problems of U-Shaped Bellows with Non-linear Deformation of Large Axisymmetrical Deflection (II)—Counting Variation of Thickness Distribution. Applied Mathematics and Mechanics, 14, 559-564.
https://doi.org/10.1007/BF02451365 |
| [8] | Chand, S. and Garg, S.B.L. (1981) Design Formulas for Expansion Bellows. Journal of Mechanical Design, 103, 881-891. https://doi.org/10.1115/1.3255001 |
| [9] | 李树勋, 张丽芳, 吕兴, 等. 二级波纹管截止阀用波纹管结构强度及疲劳可靠性研究[J]. 流体机械, 2018, 46(11): 39-44. |
| [10] | 宋林红, 黄乃宁, 等. 金属波纹管疲劳寿命的有限元分析[J]. 管道技术与设备, 2008(11): 16-18. |
| [11] | 王占彬, 周浩洋, 石朝锋, 等. 一种U型波纹管强度及稳定性分析方法研究[J]. 强度与环境, 2012, 39(4): 21-26. |
| [12] | 韩明君, 王伟兵, 李鸿瑞, 等. 单圆弧波纹管膜片的非线性大变形分析[J]. 工程力学, 2020, 37(1): 26-33. |
| [13] | Dinesh Babu, P., Keerthi Prasath, S., Barani Dharan, M., Venkat Raman, C., Narayanan, R. and Ganesh, K.C. (2014) Analysis of Static Mechanical Behaviour of Metal Bellows Using Finite Element Modeling. Applied Mechanics and Materials, 592-594, 996-1000. https://doi.org/10.4028/www.scientific.net/AMM.592-594.996 |
| [14] | Belyaev, A.K., Zinovieva, T.V. and Smirnov, K.K. (2017) Theoretical and Experimental Studies of the Stress-Strain State of Expansion Bellows as Elastic Shells. St. Petersburg Polytechnical University Journal: Physics and Mathematics, 3, 7-14. https://doi.org/10.1016/j.spjpm.2017.03.003 |
