Computer grids are infrastructures in which heterogeneous and distributed resources offer very high computing or storage performance. If they offer extreme computing performance, they are also subject to the appearance of many failures related to this type of architecture. While performing tasks, if the response time of a node in the system incomprehensibly exceeds the requirements of the specifications, the node experiences an omission failure. The task running in the failed node will be unavailable until the node resumes normal activity. Waiting not being a possible solution, many fault tolerance methods have been proposed. Despite this large number of fault tolerance methods on offer, computer grids are still prone to many failures by omission. In this work, a numerical study of the failures by omission which occur in the calculation grids during the execution of the tasks was carried out and a model allowing anticipating its failures was proposed with the formalism PDEVS (Parallel Discret EVent system Specification).
References
[1]
Kalfadj, F., Belabbas, Y. and Meddeber, M. (2009) Conception d’un Simulateur de Grilles Orienté Gestion d’ É quilibrage. Proceedings of the 2nd Conférence Internationale sur l’Informatique et ses Applications, Saida, 3-4 May 2009, 1-11.
[2]
Barchet-Estefanel, L.A. (2005) LaPIe: Communications Collectives adaptées aux Grilles de Calcul. Institut National Polytechnique De Grenoble, Grenoble.
[3]
Taïani, F., Killijian, M.O. and Fabre, C.J. (2006) Intergiciels pour la tolérance aux fautes. RSTI-TSI, 25, 599-630. https://doi.org/10.3166/tsi.25.599-630
[4]
Monnet, S. (2006) Gestion des données dans les grilles de calcul: Support pour la tolérance aux fautes et la cohérence des données. Université Rennes 1, Rennes.
[5]
Rebbah, M. (2015) Tolérance aux fautes dans les grilles de calcul. Université des Sciences et de la Technologie d’Oran, Oran.
[6]
Ndiaye, N.M. (2013) Techniques de gestion des défaillances dans les grilles informatiques tolérantes aux fautes. Université Pierre et Marie Curie, Paris.
[7]
Akoka, J. and Comyn-Wattiau, I. (2006) Encyclopédie de l’informatique et des systèmes d’information. Vuibert, Paris.
[8]
Krakoviak, S. (2004) Tolerences aux fautes, Université Joseph Fourier.
[9]
Ramat, É., Duboz, R. and Quesnel, G. (2012) Theorie de la modélisation et de la simulation, fondements formels et operationnels de record/VLE, INRA-Cirad- ULCO/LISIC.
[10]
Zeigler, B.P., Kim, T.G. and Praehofer, H. (2000) Theory of Modeling and Simulation. Academic Press, Orlando.
[11]
Foster, I. and Kesselman, C. (2003) The Grid: Blueprint for a New Computing Infrastructure. Morgan Kaufmann, Burlington.
[12]
Avizienis, A., Laprie, J.-C. and Randell, B. (2001) Fundamental Concepts of Dependability. Newcastle University, Newcastle.
[13]
Zeigler, B., Gon Kim, T. and Praehofer, H. (2000) Theory of Modeling and Simulation. 2nd Edition, Academic Press, New York.
[14]
Perez, J. (2009) Apprentissage Artiâciel pour l’ordonnancement des taches dans les grilles de calcul. Université Paris-Sud, Paris.
[15]
Zeigler, B.P. (2005) Introduction to DEVS Modeling and Simulation with JAVA: Developing Component-Based Simulation Models. Arizona Center for Integrative Modeling and Simulation, Tucson.
[16]
Kadri, W. (2012) Placement dynamique des taches dépendantes dans une grille de calcul. Université d’oran, Oran.
[17]
Villinger, S. (2021) Comment surveiller la température de votre processeur. https://www.avast.com/fr-fr/c-how-to-check-cpu-temperature
[18]
Ouedraogo, D., Wendsida Igo, S., Sawadogo, G.L., Compaore, A., Zeghmati, B. and Chesneau, X. (2020) Modeling and Numerical Simulation of Heat Transfers in a Metallic Pressure Cooker Isolated with Kapok Wool. Modeling and Numerical Simulation of Material Science, 10, 15-30. https://doi.org/10.4236/mnsms.2020.102002
[19]
Guessoum, Z., Briot, J.P., Faci, N. and Marin, O. (2004) Un mécanisme de réplication adaptative pour des SMA tolérants aux pannes. JFSMA.
[20]
Zeigler, B. (1976) Theory of Modeling and Simulation. Academic Press, London.
