The
presence of bearing faults reduces the efficiency of rotating machines and thus
increases energy consumption or even the total stoppage of the machine. It becomes essential to correctly diagnose the
fault caused by the bearing. Hence the importance of determining an
effective features extraction method that best describes the fault. The vision
of this paper is to merge the features selection methods in order to define the
most relevant featuresin the texture of the
vibration signal images. In this study, the Gray Level Co-occurrence Matrix
(GLCM) in texture analysis is applied on the vibration signal represented in
images. Featuresselection based on the merge of PCA (Principal component Analysis) method
and SFE (Sequential Features Extraction) method is done to obtain the most relevant features. The multiclass-Na?ve
Bayesclassifier is used to test the proposed approach. The success rate
of this classification is 98.27%. The relevant features obtained give promising
results and are more efficient than the methods observed in the literature.
References
[1]
Ye, Z.M. and Wu, B. (2000) A Review on Induction Motor Online Fault Diagnosis. Proceedings of the IPEMC Third International Power Electronics and Motion Control Conference (IEEE Cat. No.00EX435), Beijing, 15-18 August 2000, 1353-1358. https://doi.org/10.1109/IPEMC.2000.883050
[2]
Kaplan, K., Kaya, Y., Kuncan, M., Mïnaz, M. R. and Metin Ertunç, H. (2020) An Improved Feature Extraction Method Using Texture Analysis with LBP for Bearing Fault Diagnosis. Applied Soft Computing, 87, Article ID: 106019. https://doi.org/10.1016/j.asoc.2019.106019
[3]
Ertunc, H. M., Ocak, H. and Aliustaoglu, C. (2013). ANN- and ANFIS-Based Multi-Staged Decision Algorithm for the Detection and Diagnosis of Bearing Faults. Neural Computing and Applications, 22, 435-446. https://doi.org/10.1007/s00521-012-0912-7
[4]
Shen, C., Wang, D., Liu, Y., Kong, F. and Tse, P.W. (2014) Recognition of Rolling Bearing Fault Patterns and Sizes Based on Two-Layer Support Vector Regression Machines. Smart Structures and Systems, 13, 453-471. https://doi.org/10.12989/sss.2014.13.3.453
[5]
Cai, J.H. (2014) Fault Diagnosis of Rolling Bearing Based on Empirical Mode Decomposition and Higher Order Statistics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229, 1630-1638. https://doi.org/10.1177/0954406214545820
[6]
Berredjem, T. and Benidir, M. (2018) Bearing Faults Diagnosis Using Fuzzy Expert System Relying on an Improved Range Overlaps and Similarity Method. Expert Systems with Applications, 108, 134-142. https://doi.org/10.1016/j.eswa.2018.04.025
[7]
Zhang, S., Zhang, S., Wang, B. and Habetler, T.G. (2019) Deep Learning Algorithms for Bearing Fault Diagnostics—A Review. 2019 IEEE 12th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Toulouse, 27-30 August 2019, 257-263. https://doi.org/10.1109/DEMPED.2019.8864915
[8]
Kuncan, M., Kaplan, K., Mïnaz, M.R., Kaya, Y. and Metin Ertunç, H. (2020) A Novel Feature Extraction Method for Bearing Fault Classification with One Dimensional Ternary Patterns. ISA Transactions, 100, 346-357. https://doi.org/10.1016/j.isatra.2019.11.006
[9]
Cempel, C. and Tabaszewski, M. (2007) Multidimensional Condition Monitoring of Machines in Non-Stationary Operation. Mechanical Systems and Signal Processing, 21, 1233-1241. https://doi.org/10.1016/j.ymssp.2006.04.001
[10]
Li, W., Zhu, Z., Jiang, F., Zhou, G. and Chen, G. (2015) Fault Diagnosis of Rotating Machinery with a Novel Statistical Feature Extraction and Evaluation Method. Mechanical Systems and Signal Processing, 50-51, 414-426. https://doi.org/10.1016/j.ymssp.2014.05.034
[11]
Yu, Y., Yu, D. and Cheng, J. (2006) A Roller Bearing Fault Diagnosis Method Based on EMD Energy Entropy and ANN. Journal of Sound and Vibration, 294, 269-277. https://doi.org/10.1016/j.jsv.2005.11.002
[12]
Wang, Y., Ban, X., Chen, J., Hu, B. and Yang, X. (2015) License Plate Recognition Based on SIFT Feature. Optik, 126, 2895-2901. https://doi.org/10.1016/j.ijleo.2015.07.040
[13]
Cho, H. and Park, H. (2017) Classification of Low-Grade and High-Grade Glioma Using Multi-Modal Image Radiomics Features. 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Jeju, 11-15 July 2017, 3081-3084. https://doi.org/10.1109/EMBC.2017.8037508
[14]
Zhang, X.D. (2020) A Matrix Algebra Approach to Artificial Intelligence. Springer, Singapore. https://doi.org/10.1007/978-981-15-2770-8
[15]
Kuncan, M. (2020) An Intelligent Approach for Bearing Fault Diagnosis: Combination of 1D-LBP and GRA. IEEE Access, 8, 137517-137529. https://doi.org/10.1109/ACCESS.2020.3011980
[16]
Haralick, R.M., Shanmugam, K. and Dinstein, I. (1973) Textural Features for Image Classification. IEEE Transactions on Systems, Man, and Cybernetics, 3, 610-621. https://doi.org/10.1109/TSMC.1973.4309314
[17]
Gong, S., Liu, C., Ji, Y., Zhong, B., Li, Y. and Dong, H. (2019) Advanced Image and Video Processing Using MATLAB. Vol. 12, Springer International Publishing, Heidelberg.
[18]
Soh, L.-K. and Tsatsoulis, C. (1999) Texture Analysis of SAR Sea Ice Imagery Using Gray Level Co-Occurrence Matrices. IEEE Transactions on Geoscience and Remote Sensing, 37, 780-795. https://doi.org/10.1109/36.752194
[19]
Clausi, D. (2002) An Analysis of Co-Occurrence Texture Statistics as a Function of Grey Level Quantization. Canadian Journal of Remote Sensing, 28, 45-62. https://doi.org/10.5589/m02-004
[20]
Uddin, J., Kang, M., Nguyen, D.V. and Kim, J.-M. (2014) Reliable Fault Classification of Induction Motors Using Texture Feature Extraction and a Multiclass Support Vector Machine. Mathematical Problems in Engineering, 2014, Article ID: 814593. https://doi.org/10.1155/2014/814593
[21]
Ruckstieß, T., Osendorfer, C. and van der Smagt, P. (2011) Sequential Feature Selection for Classification. Australasian Joint Conference on Artificial Intelligence, Perth, 5-8 December 2011, 132-141. https://doi.org/10.1007/978-3-642-25832-9_14
[22]
Muntasa, A. (2015) Pengenalan Pola. GrahaIlmu, Yogyakarta.
[23]
Ali Khan, S. and Kim, J.-M. (2016) Automated Bearing Fault Diagnosis Using 2D Analysis of Vibration Acceleration Signals under Variable Speed Conditions. Shock and Vibration, 2016, Article ID: 8729572. https://doi.org/10.1155/2016/8729572
[24]
Case Western Reserve University Bearing Data Center Website (n.d.). http://csegroups.case.edu/bearingdatacenter/home
[25]
Zhang, J.Q., Sun, Y., Guo, L., Gao, H., Hong, X. and Song, H.L. (2019) A New Bearing Fault Diagnosis Method Based on Modified Convolutional Neural Networks. Chinese Journal of Aeronautics, 33, 439-447. https://doi.org/10.1016/j.cja.2019.07.011
