Wettability Control between Oleophobic/Superhydrophilic and Superoleophilic/Superhydrophobic Characteristics on the Modified Surface Treated with Fluoroalkyl End-Capped Oligomers/Micro-Sized Polystyrene Particle Composites
Fluoroalkyl end-capped
vinyltrimethoxysilane-N,N-dimethylacrylamide
cooligomer [RF-(CH2-CHSi(OMe)3)x-(CH2-CHC(=O)NMe2)y-RF;
RF = CF(CF3)OC3F7: RF-(VM)x-(DMAA)y-RF]
was synthesized by reaction of fluoroalkanoyl peroxide [RF-C(=O)O-O(O=)C-RF]
with vinyltrimethoxysilane (VM) and N,
References
[1]
Parida, S.K., Dash, S., Patel, S. and Mishra, B.K. (2006) Adsorption of Organic Molecules on Silica Surface. Advances in Colloid and Interface Science, 121, 77-110. https://doi.org/10.1016/j.cis.2006.05.028
[2]
He, H., Gan, Q. and Feng, C. (2017) Preparation and Application of Ni(ii) Ion-Imprinted Silica Gel Polymer for Selective Separation of Ni(ii) from Aqueous Solution. RSC Advances, 7, 15102-15111. https://doi.org/10.1039/C7RA00101K
[3]
Tokman, N., Akaman, S. and Ozean, M. (2003) Solid-Phase Extraction of Bismuth, Lead and Nickel from Seawater Using Silica Gel Modified with 3-Aminopropyltriethoxysilane Filled in a Syringe Prior to Their Determination by Graphite Furnace Atomic Absorption Spectrometry. Talanta, 59, 201-205. https://doi.org/10.1016/S0039-9140(02)00479-4
[4]
Sui, H., Liu, H., An, P., He, L., Li, X. and Cong, S.J. (2017) Application of Silica Gel in Removing High Concentrations Toluene Vapor by Adsorption and Desorption Process. Journal of the Taiwan Institute of Chemical Engineers, 74, 218-224. https://doi.org/10.1016/j.jtice.2017.02.019
[5]
Vardini, M.T. and Mardani, L. (2018) Surface Imprinting of Silica Gel by Methyldopa and Its Application in the Solid Phase Extraction Produce. Journal of the Brazilian Chemical Society, 29, 310-319.
[6]
Guibal, E., Lorenzelli, R., Vincent, T. and Cloirec, P.L. (1995) Application of Silica Gel to Metal Ion Sorption: Static and Dynamic Removal of Uranyl Ions. Environmental Technology, 16, 101-114. https://doi.org/10.1080/09593331608616251
[7]
Inukai, Y., Tanaka, Y., Matsuda, T., Mihara, N., Yamada, K., Nambu, N., Itoh, O., Doi, T., Kaida, Y. and Yasuda, S. (2004) Removal of Boron(III) by N-Methylglucamine-Type Cellulose Derivatives with Higher Adsorption Rate. Analytica Chimica Acta, 511, 261-265. https://doi.org/10.1016/j.aca.2004.01.054
[8]
Inukai, Y., Kaida, Y. and Yasuda, S. (1997) Selective Adsorbents for Germanium(IV) Derived from Chitosan. Analytica Chimica Acta, 343, 275-279. https://doi.org/10.1016/S0003-2670(97)00009-3
[9]
Kim, B.R., Snoeyink, V.L. and Saunders, F.M. (1976) Adsorption of Organic Compounds by Synthetic Resins. Journal of the Water Pollution Control Federation, 48, 120-133. https://doi.org/10.1252/jcej.17.204
[10]
Goto, S., Goto, M. and Uchiyama, S. (1984) Adsorption Equilibria of Phenol on Anion Exchange Resins in Aqueous Solution. Journal of Chemical Engineering of Japan, 17, 204-205.
[11]
Parrino, F. and Palmisano, L. (Eds.) (2021) Titanium Dioxide TiO2 and Its Applications. Elsevier, Amsterdam.
[12]
Wang, Y., Li, J., Wang, L., Xue, T. and Qi, T. (2010) Preparation of Rutile Titanium Dioxide White Pigment via Doping and Calcination of Metatitanic Acid Obtained by the NaOH Molten Salt Method. Industrial & Engineering Chemistry Research, 49, 7693-7696. https://doi.org/10.1021/ie1007147
[13]
Tian, C., Huang, S. and Yang, Y. (2013) Anatase TiO2 White Pigment Production from Unenriched Industrial Titanyl Sulfate Solution via Short Sulfate Process. Dyes and Pigments, 96, 609-613. https://doi.org/10.1016/j.dyepig.2012.09.016
[14]
Li, J., Wan, H., Ye, Y., Zhou, H. and Chen, J. (2012) One-Step Process to Fabrication of Transparent Superhydrophobic SiO2 Paper. Applied Surface Science, 261, 470-472. https://doi.org/10.1016/j.apsusc.2012.08.034
[15]
Zhang, M., Wang, C., Wang, S., Shi, Y. and Li, J. (2012) Fabrication of Coral-Like Superhydrophobic Coating on Filter Paper for Water-Oil Separation. Applied Surface Science, 261, 764-769. https://doi.org/10.1016/j.apsusc.2012.08.097
[16]
Suzuki, J., Takegahara, Y., Oikawa, Y., Aomi, Y. and Sawada, H. (2018) Preparation of Fluoroalkyl End-Capped Oligomer/Cyclodextrin Polymer Composites: Development of Fluorinated Composite Material Having a Higher Adsorption Ability toward Organic Molecules. Journal of Encapsulation and Adsorption Sciences, 8, 117-138.
https://doi.org/10.4236/jeas.2018.82006
[17]
Sawada, H., Chiba, M., Honma, G., Yamashita, K. and Suzuki, J. (2020) Preparation of Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomer/Micro-Sized Silica Composites Possessing Superoleophilic/Superhydrophobic Characteristic: Application to Selective Removal of Aromatic Compounds from Aqueous Methanol Solution by Using These Composites. Journal of Sol-Gel Science and Technology, 96, 636-648. https://doi.org/10.1007/s10971-020-05351-7
[18]
Sawada, H., Ikematsu, Y., Kawase, T. and Hayakawa, Y. (1996) Synthesis and Surface Properties of Novel Fluoroalkylated Flip-Flop-Type Silane Coupling Agents. Langmuir, 12, 3529-3530. https://doi.org/10.1021/la951041p
[19]
Sawada, H. and Nakayama, M.J. (1991) Synthesis of Fluorine-Containing Organosilicon Oligomers. Journal of the Chemical Society, Chemical Communications, No. 10, 677-678. https://doi.org/10.1039/c39910000677
[20]
Kota, A.K., Li, Y., Marby, J.M. and Tuteja, A. (2012) Hierarchically Structured Superoleophobic Surfaces with Ultralow Contact Angle Hysteresis. Advanced Materials, 24, 5838-5843. https://doi.org/10.1002/adma.201202554
[21]
Deng, X., Mammen, L., Butt, H.-J. and Vollmer, D. (2012) Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating. Science, 335, 67-70. https://doi.org/10.1126/science.1207115
[22]
Yao, X., Song, Y. and Jiang, L. (2011) Applications of Bio-Inspired Special Wettable Surfaces. Advanced Materials, 23, 719-734. https://doi.org/10.1002/adma.201002689
[23]
Zhang, D., Liu, F., Zhang, M., Gao, Z. and Wang, C. (2015) Novel Superhydrophobic and Superoleophilic Sawdust as a Selective Oil Sorbent for Oil Spill Cleanup. Chemical Engineering Research and Design, 102, 35-41. https://doi.org/10.1016/j.cherd.2015.06.014
[24]
Zhang, M., Wang, C., Wang, S., Shi, Y. and Li, J. (2013) Fabrication of Superhydrophobic Cotton Textiles for Water-Oil Separation Based on Drop-Coating Route. Carbohydrate Polymers, 97, 59-64. https://doi.org/10.1016/j.carbpol.2012.08.118
[25]
Arbatan, T., Zhang, L., Fang, X.-Y. and Shen, W. (2012) Cellulose Nanofibers as Binder for Fabrication of Superhydrophobic Paper. Chemical Engineering Journal, 210, 74-79. https://doi.org/10.1016/j.cej.2012.08.074
[26]
Si, Y. and Guo, Z. (2015) Superwetting Materials of Oil-Water Emulsion Separation. Chemistry Letters, 44, 874-883. https://doi.org/10.1246/cl.150223
[27]
Liu, K., Tian, Y. and Jiang, L. (2013) Bio-Inspired Superoleophobic and Smart Materials: Design, Fabrication, and Application. Progress in Materials Science, 58, 503-564.
https://doi.org/10.1016/j.pmatsci.2012.11.001
[28]
Darmanin, T. and Guittard, F. (2014) Wettability of Conducting Polymers: From Superhydrophilicity to Superoleophobicity. Progress in Polymer Science, 39, 656-682. https://doi.org/10.1016/j.progpolymsci.2013.10.003
[29]
El-Gawad, H.S.A. (2014) Oil and Grease Removal from Industrial Wastewater Using New Utility Approach. Advances in Environmental Chemistry, 2014, Article ID: 916878. https://doi.org/10.1155/2014/916878
[30]
da Costa Cunha, G., Pinho, N.C., I.Silva, A.A., Siva, L.S., Costa, J.A.S., da Silva, C.M.P., Romao, L.P.C. (2019) Removal of Heavy Crude Oil from Water Surfaces Using a Magnetic Inorganic-Organic Hybrid Powder and Membrane System. Journal of Environmental Management, 247, 9-18. https://doi.org/10.1016/j.jenvman.2019.06.050
[31]
Gkogkou, D., Rizogianni, S., Tziasiou, C., Gouma, V., Pourna, A.D., Giokas, D.L., Manos, M.J. (2021) Highly Efficient Removal of Crude Oil and Dissolved Hydrocarbons from Water Using Superhydrophobic Cotton Filters. Journal of Environmental Chemical Engineering, 9, Article ID: 106170. https://doi.org/10.1016/j.jece.2021.106170
[32]
Wang, J., Zhang, X., Lu, H., Fu, Y., Xu, M., Jiang, X. and Wu, J. (2021) Superhydrophobic Nylon Fabric with Kaolin Coating for Oil Removal under Harsh Water Environments. Applied Clay Science, 214, Article ID: 106294. https://doi.org/10.1016/j.clay.2021.106294
[33]
Wang, Y., Yan, J., Wang, J., Zhang, X., Wei, L., Du, Y., Yu, B. and Ye, S. (2020) Superhydrophobic Metal Organic Framework Doped Polycarbonate Porous Monolith for Efficient Selective Removal oil From Water. Chemosphere, 260, Article ID: 127583. https://doi.org/10.1016/j.chemosphere.2020.127583
[34]
Wu, J., Yin, K., Li, M., Xiao, S., Wu, Z., Wang, K., Duan, J.-A. and He, J. (2020) Femtosecond Laser Manipulating Underoil Surface Wettability for Water Removal from Oil. Colloid Surfaces A, 601, Article ID: 125030. https://doi.org/10.1016/j.colsurfa.2020.125030
[35]
Tsai, Y.-T., Maggay, I.V., Venault, A. and Lin, Y.-F. (2021) Fluorine-Free and Hydrophobic/Oleophilic PMMA/PDMS Electrospun Nanofibrous Membranes for Gravity-Driven Removal of Water from Oil-Rich Emulsions. Separation and Purification Technology, 279, Article ID: 119720. https://doi.org/10.1016/j.seppur.2021.119720
[36]
Molla, S.H., Masliyah, J.H. and Bhattacharjee, S. (2005) Simulations of a Dielectrophoretic Membrane Filtration Process for Removal of Water Droplets from Water-in-Oil Emulsions. Journal of Colloid and Interface Science, 287, 338-350. https://doi.org/10.1016/j.jcis.2004.06.096
[37]
Petchsoongsakul, N., Ngaosuwan, K., Kiatkittipong, W., Wongsawaeng, D. and Assabumrungrat, S. (2020) Different Water Removal Methods for Facilitating Biodiesel Production from Low-Cost Waste Cooking Oil Containing High Water Content in Hybridized Reactive Distillation. Renewable Energy, 162, 1906-1918. https://doi.org/10.1016/j.renene.2020.09.115
