Synthetic wood adhesives, consisting of urea-formaldehyde resins (UF), phenol-formaldehyde resins (PF), melamine-formaldehyde resins (MF), and polyurethane resins, are widely used. For UF and MF, most investigations are concerned with reducing free formaldehyde content; for PF, most studies focused on finding new alternative chemicals to replace phenol. These adhesives come under the Carcinogenic, Mutagenic, and Reprotoxic chemicals (CMR) category. Due to global energy issues and dependency on petroleum sources, the focus has shifted to look for alternative and renewable raw material sources for wood adhesives. Conventionally available wood adhesives are polyvinyl alcohol (PVA) stabilized, with drawbacks like poor water resistance, poor heat resistance, low-temperature workability, and it’s based on petroleum resources. Polyvinyl acetate (PVAc) is non-resistant to moisture polymer, and if such adhesive joints are exploited in a moist environment, its strength substantially decreases. Sufficiently moisture-resistant adhesive joints are obtained by modifying PVAc dispersion with special compounds like reactive comonomer, Silanes, and modified PVA. To improve the workability at low temperature, Vinyl acetate (VAc) is copolymerized with specific comonomers like butyl acetate without affecting the performance properties. Here, we aim to present an overview of the research trend of PVAc-based adhesives in the wood industry. The review summarizes the current state of research PVAc-based adhesives.
References
[1]
Jakes, J.E., Frihart, C.R., Hunt, C.G., Yelle, D.J., Plaza, N.Z., Lorenz, L., Grigsby, W., Ching, D.J., Kamke, F., Gleber, S.-C., Vogt, S. and Xiao, X. (2019) X-Ray Methods to Observe and Quantify Adhesive Penetration into Wood. Journal of Materials Science, 54, 705-718. https://doi.org/10.1007/s10853-018-2783-5
[2]
ülker, O. (2016) Wood Adhesives and Bonding Theory. In: Rudawska, A., Ed., Adhesives—Applications and Properties, InTech, London. https://doi.org/10.5772/65759
[3]
Kaboorani, A. and Riedl, B. (2011) Improving Performance of Polyvinyl Acetate (PVA) as a Binder for Wood by Combination with Melamine Based Adhesives. International Journal of Adhesion and Adhesives, 31, 605-611. https://doi.org/10.1016/j.ijadhadh.2011.06.007
[4]
Vnučec, D., Goršek, A., Kutnar, A. and Mikuljan, M. (2015) Thermal Modification of Soy Proteins in the Vacuum Chamber and Wood Adhesion. Wood Science and Technology, 49, 225-239. https://doi.org/10.1007/s00226-014-0685-5
[5]
Ciannamea, E.M., Stefani, P.M. and Ruseckaite, R.A. (2010) Medium-Density Particleboards from Modified Rice Husks and Soybean Protein Concentrate-Based Adhesives. Bioresource Technology, 101, 818-825. https://doi.org/10.1016/j.biortech.2009.08.084
[6]
Navarrete, P., Pizzi, A., Bertaud, F. and Rigolet, S. (2011) Condensed Tannin Reactivity Inhibition by Internal Rearrangements: Detection by CP-MAS 13C NMR. Maderas. Ciencia y Tecnología, 13, 59-68. https://doi.org/10.4067/S0718-221X2011000100006
[7]
Kim, S. (2009) Environment-Friendly Adhesives for Surface Bonding of Wood-Based Flooring Using Natural Tannin to Reduce Formaldehyde and TVOC Emission. Bioresource Technology, 100, 744-748. https://doi.org/10.1016/j.biortech.2008.06.062
[8]
Pizzi, A. (2006) Recent Developments in Eco-Efficient Bio-Based Adhesives for Wood Bonding: Opportunities and Issues. Journal of Adhesion Science and Technology, 20, 829-846. https://doi.org/10.1163/156856106777638635
[9]
Effendi, A., Gerhauser, H. and Bridgwater, A.V. (2008) Production of Renewable Phenolic Resins by Thermochemical Conversion of Biomass: A Review. Renewable & Sustainable Energy Reviews, 12, 2092-2116. https://doi.org/10.1016/j.rser.2007.04.008
[10]
Bradshaw, I.J. and Kennedy, J.F. (1985) Starch: Chemistry and Technology, 2nd Edition edited by R. L. Whistler, J. N. BeMiller and E. F. Paschall, Academic Press, Orlando, Florida, 1984. pp. 736, price ￡53.00. ISBN 0-12-746270-8. British Polymer Journal, 17, 377-378. https://doi.org/10.1002/pi.4980170413
[11]
Wang, Z., Li, Z., Gu, Z., Hong, Y. and Cheng, L. (2012) Preparation, Characterization and Properties of Starch-Based Wood Adhesive. Carbohydrate Polymers, 88, 699-706. https://doi.org/10.1016/j.carbpol.2012.01.023
[12]
Athawale, V.D. and Lele, V. (2000) Thermal Studies on Granular Maize Starch and its Graft Copolymers with Vinyl Monomers. Starch, 52, 205-213. https://doi.org/10.1002/1521-379X(200007)52:6/7<205::AID-STAR205>3.0.CO;2-3
[13]
Goñi, I., Gurruchaga, M., Valero, M. and Guzman, G.M. (1983) Graft Polymerization of Acrylic Monomers onto Starch Fractions. I. Effect of Reaction Time on Grafting Methyl Methacrylate onto Amylase. Journal of Polymer Science: Polymer Chemistry Edition, 21, 2573-2580. https://doi.org/10.1002/pol.1983.170210837
[14]
Gurruchaga, M., Goñi, I., Valero, M. and Guzmán, G.M. (1992) Graft copoLymerization of Hydroxylic Methacrylates and Ethyl Acrylate onto Amylopectin. Polymer (Guildf), 33, 2860-2862. https://doi.org/10.1016/0032-3861(92)90467-B
[15]
Kaewtatip, K. and Tanrattanakul, V. (2008) Preparation of Cassava Starch Grafted with Polystyrene by Suspension Polymerization. Carbohydrate Polymers, 73, 647-655. https://doi.org/10.1016/j.carbpol.2008.01.006
[16]
Kim, S. and Kim, H.-J. (2006) Thermal Stability and Viscoelastic Properties of MF/PVAc Hybrid Resins on the Adhesion for Engineered Flooring in under Heating System; ONDOL. Thermochimica Acta, 444, 134-140. https://doi.org/10.1016/j.tca.2006.03.009
[17]
Meshram, M.W., Patil, V.V., Mhaske, S.T. and Thorat, B.N. (2009) Graft Copolymers of Starch and Its Application in Textiles. Carbohydrate Polymers, 75, 71-78. https://doi.org/10.1016/j.carbpol.2008.06.012
[18]
Atanase, L.I., Bistac, S. and Riess, G. (2015) Effect of Poly(vinyl alcohol-co-vinyl acetate) Copolymer Blockiness on the Dynamic Interfacial Tension and Dilational Viscoelasticity of Polymer-Anionic Surfactant Complex at the Water-1-Chlorobutane Interface. Soft Matter, 11, 2665-2672. https://doi.org/10.1039/C4SM02766C
[19]
Gadhave, R.V., Mahanwar, P.A. and Gadekar, P.T. (2017) Starch-Based Adhesives for Wood/Wood Composite Bonding: Review. Open Journal of Polymer Chemistry, 7, 19-32. https://doi.org/10.4236/ojpchem.2017.72002
Ranade, A., D’Souza, N.A. and Gnade, B. (2002) Exfoliated and Intercalated Polyamide-Imide Nanocomposites with Montmorillonite. Polymer (Guildf), 43, 3759-3766. https://doi.org/10.1016/S0032-3861(02)00106-4
[22]
Stefani, P.M., Peña, C., Ruseckaite, R.A., Piter, J.C. and Mondragon, I. (2008) Processing Conditions Analysis of Eucalyptus globulus Plywood Bonded with Resol-Tannin Adhesives. Bioresource Technology, 99, 5977-5980. https://doi.org/10.1016/j.biortech.2007.10.013
[23]
Roffael, E., Dix, B. and Okum, J. (2000) Use of Spruce Tannin as a Binder in Particleboards and Medium Density Fiberboards (MDF). Holz als Roh- und Werkstoff, 58, 301-305. https://doi.org/10.1007/s001070050432
[24]
Nuryawan, A., Ridwansyah, Alamsyah, E.M. and Widyorini, R. (2020) Starch Based Adhesives Made from Durian Seed through Dextrinization. IOP Conference Series: Materials Science and Engineering, 801, Article ID: 012088. https://doi.org/10.1088/1757-899X/801/1/012088
[25]
Li, Z., Wang, J., Li, C., Gu, Z., Cheng, L. and Hong, Y. (2015) Effects of Montmorillonite Addition on the Performance of Starch-Based Wood Adhesive. Carbohydrate Polymers, 115, 394-400. https://doi.org/10.1016/j.carbpol.2014.08.106
[26]
Kinloch, A.J. (1987) Adhesion and Adhesives. Springer Netherlands, Dordrecht. https://doi.org/10.1007/978-94-015-7764-9
[27]
Lerner, F. and Alon, M. (1987) Fractionation of Partly Hydrolyzed Polyvinyl Acetate. Journal of Polymer Science Part A: Polymer Chemistry, 25, 181-189. https://doi.org/10.1002/pola.1987.080250115
[28]
Wang, Z., Gu, Z., Hong, Y., Cheng, L. and Li, Z. (2011) Bonding Strength and Water Resistance of Starch-Based Wood Adhesive Improved by Silica Nanoparticles. Carbohydrate Polymers, 86, 72-76. https://doi.org/10.1016/j.carbpol.2011.04.003
[29]
Zeng, Y., Xu, P., Yang, W., Chu, H., Wang, W., Dong, W., Chen, M., Bai, H. and Ma, P. (2021) Soy Protein-Based Adhesive with Superior Bonding Strength and Water Resistance by Designing Densely Crosslinking Networks. European Polymer Journal, 142, Article ID: 110128. https://doi.org/10.1016/j.eurpolymj.2020.110128
[30]
Morales, R., Martínez, K.D., Ruiz-Henestrosa, V.M.P. and Pilosof, A.M.R. (2015) Modification of Foaming Properties of Soy Protein Isolate by High Ultrasound Intensity: Particle Size Effect. Ultrasonics Sonochemistry, 26, 48-55. https://doi.org/10.1016/j.ultsonch.2015.01.011
[31]
Hettiarachchy, N.S., Kalapathy, U. and Myers, D.J. (1995) Alkali-Modified Soy Protein with Improved Adhesive and Hydrophobic Properties. Journal of the American Oil Chemists’ Society, 72, 1461-1464. https://doi.org/10.1007/BF02577838
[32]
Gadhave, R.V., Mahanwar, P.A. and Gadekar, P.T. (2019) Study on Various Compositions of Polyvinyl Alcohol and Starch Blends by Cross-Linking with Glyoxal. Open Journal of Polymer Chemistry, 9, 76-85. https://doi.org/10.4236/ojpchem.2019.94007
[33]
Moubarik, A., Allal, A., Pizzi, A., Charrier, F. and Charrier, B. (2010) Preparation and Mechanical Characterization of Particleboard Made from Maritime Pine and Glued with Bio-Adhesives Based on Cornstarch and Tannins. Maderas. Ciencia y Tecnología, 12, 189-197. https://doi.org/10.4067/S0718-221X2010000300004
[34]
Weakley, F.B., Carr, M.E. and Mehltretter, C.L. (1972) Dialdehyde Starch in Paper Coatings Containing Soy Flour-Isolated Soy Protein Adhesive. Starch, 24, 191-194. https://doi.org/10.1002/star.19720240604
[35]
Wu, Y.B., Lv, C.F. and Han, M.N. (2009) Synthesis and Performance Study of Polybasic Starch Graft Copolymerization Function Materials. Advanced Materials Research, 79-82, 43-46. https://doi.org/10.4028/www.scientific.net/AMR.79-82.43
[36]
Skeist, I., Ed. (1990) Handbook of Adhesives. Springer US, Boston, MA. https://doi.org/10.1007/978-1-4613-0671-9
[37]
Huang, J. and Li, K. (2008) A New Soy Flour-Based Adhesive for Making Interior Type II Plywood. Journal of the American Oil Chemists’ Society, 85, 63-70. https://doi.org/10.1007/s11746-007-1162-1
[38]
Sotayo, A., Bradley, D.F., Bather, M., Oudjene, M., El-Houjeyri, I. and Guan, Z. (2020) Development and Structural Behaviour of Adhesive Free Laminated Timber Beams and Cross Laminated Panels. Construction and Building Materials, 259, Article ID: 119821. https://doi.org/10.1016/j.conbuildmat.2020.119821
[39]
Li, X., Guan, P. and Liu, Y. (n.d.) Environmentally Friendly Starch-Modified Polyvinyl Alcohol Adhesives for Construction and Preparation Method Thereof. CN103897639.
[40]
Bangham, D.H. and Razouk, R.I. (1937) Adsorption and the Wettability of Solid Surfaces. Transactions of the Faraday Society, 33, 1459-1463. https://doi.org/10.1039/tf9373301459
[41]
Gu, J.Y., Zuo, Y.F., Zhang, Y.H., Tan, H.Y., Zhu, L.B. and Shen, J. (2010) Preparation of Plywood Using Starch Adhesives Modified with Isocyanate. Applied Mechanics and Materials, 26-28, 1065-1068. https://doi.org/10.4028/www.scientific.net/AMM.26-28.1065
[42]
Gao, Z., Wang, W., Zhao, Z. and Guo, M. (2011) Novel Whey Protein-Based Aqueous Polymer-Isocyanate Adhesive for Glulam. Journal of Applied Polymer Science, 120, 220-225. https://doi.org/10.1002/app.33025
[43]
Özcan, C., Uysal, B., Kurt, Ş. and Esen, R. (2013) Effect of Dowels and Adhesive Types on Withdrawal Strength in Particleboard and MDF. Journal of Adhesion Science and Technology, 27, 843-854. https://doi.org/10.1080/01694243.2012.727157
[44]
Wang, Z., Gu, Z., Li, Z., Hong, Y. and Cheng, L. (2013) Effects of Emulsifier on the Bonding Performance and Freeze-Thaw Stability of Starch-Based Wood Adhesive. Cellulose, 20, 2583-2590. https://doi.org/10.1007/s10570-013-9984-5
[45]
Lu, D., Xiao, C. and Sun, F. (2012) Controlled Grafting of Poly(vinyl acetate) onto Starch via RAFT Polymerization. Journal of Applied Polymer Science, 124, 3450-3455. https://doi.org/10.1002/app.35423
[46]
Kim, S. and Kim, H.-J. (2006) Study of Miscibility of Melamine-Formaldehyde Resin and Poly(vinyl acetate) Blends for Use as Adhesives in Engineered Flooring. Journal of Adhesion Science and Technology, 20, 209-219. https://doi.org/10.1163/156856106775897739
[47]
Gadhave, R.V., Srivastava, S., Mahanwar, P.A. and Gadekar, P.T. (2019) Lignin: Renewable Raw Material for Adhesive. Open Journal of Polymer Chemistry, 9, 27-38. https://doi.org/10.4236/ojpchem.2019.92003
Qiao, L. and Easteal, A.J. (2001) Aspects of the Performance of PVAc Adhesives in Wood Joints. Pigment & Resin Technology, 30, 79-87. https://doi.org/10.1108/03699420110381599
[50]
Cui, H.-W., Fang, Q. and Du, G.-B. (2014) Dynamic Mechanical and Thermal Kinetics of Polyvinyl Acetate Type Emulsions from Vinyl Acetate, N-Hydroxymethyl Acrylamide, and Montmorillonite. Advances in Polymer Technology, 33, Article ID: 21393. https://doi.org/10.1002/adv.21393
[51]
Chiozza, F. and Pizzo, B. (2016) Innovation in Poly(vinyl acetate) Water Resistant D3 Glues Used in Wood Industry. International Journal of Adhesion and Adhesives, 70, 102-109. https://doi.org/10.1016/j.ijadhadh.2016.06.003
[52]
Qiao, L., Coveny, P.K. and Easteal, A.J. (2002) Modifications of Poly(vinyl alcohol) for Use in Poly(vinyl acetate) Emulsion Wood Adhesives. Pigment & Resin Technology, 31, 88-95. https://doi.org/10.1108/03699420210420378
[53]
Gonzalez, G.S.M., Dimonie, V.L., Sudol, E.D., Yue, H.J., Klein, A. and El-Aasser, M.S. (1996) Characterization of Poly(vinyl alcohol) during the Emulsion Polymerization of Vinyl Acetate Using Poly(vinyl alcohol) as Emulsifier. Journal of Polymer Science Part A: Polymer Chemistry, 34, 849-862. https://doi.org/10.1002/(SICI)1099-0518(19960415)34:5<849::AID-POLA14>3.0.CO;2-I
[54]
Nakamae, M., Yuki, K., Sato, T. and Maruyama, H. (1999) Preparation of Polymer Emulsions Using a Poly(vinyl alcohol) as Protective Colloid. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 153, 367-372. https://doi.org/10.1016/S0927-7757(98)00458-0
[55]
Fagbemi, O.D. and Sithole, B. (2021) Evaluation of Waste Chicken Feather Protein Hydrolysate as a Bio-Based Binder for Particleboard Production. Current Research in Green and Sustainable Chemistry, 4, Article ID: 100168. https://doi.org/10.1016/j.crgsc.2021.100168
[56]
Mori, A., Kitayama, T., Takatani, M. and Okamoto, T. (2004) A Honeymoon-Type Adhesive for Wood Products Based on Acetoacetylated Poly(vinyl alcohol) and Diamines: Effect of Diamines and Degree of Acetoacetylation. Journal of Applied Polymer Science, 91, 2966-2972. https://doi.org/10.1002/app.13491
[57]
Fang, Q., Cui, H.-W. and Du, G.-B. (2013) Preparation and Characterization of PVAc-NMA-MMT. Journal of Thermoplastic Composite Materials, 26, 1393-1406. https://doi.org/10.1177/0892705712461644
[58]
Cui, H.-W. and Du, G.-B. (2013) Development of Novel Polymers Prepared by Vinyl Acetate and N-Hydroxymethyl Acrylamide. Journal of Thermoplastic Composite Materials, 26, 762-776. https://doi.org/10.1177/0892705711429165
[59]
Kaboorani, A. and Riedl, B. (2011) Effects of Adding Nano-Clay on Performance of Polyvinyl Acetate (PVA) as a Wood Adhesive. Composites Part A: Applied Science and Manufacturing, 42, 1031-1039. https://doi.org/10.1016/j.compositesa.2011.04.007
[60]
Mahrdt, E., Pinkl, S., Schmidberger, C., van Herwijnen, H.W.G., Veigel, S. and Gindl-Altmutter, W. (2016) Effect of Addition of Microfibrillated Cellulose to Urea-Formaldehyde on Selected Adhesive Characteristics and Distribution in Particle Board. Cellulose, 23, 571-580. https://doi.org/10.1007/s10570-015-0818-5
[61]
Veigel, S., Rathke, J., Weigl, M. and Gindl-Altmutter, W. (2012) Particle Board and Oriented Strand Board Prepared with Nanocellulose-Reinforced Adhesive. Journal of Nanomaterials, 2012, Article ID: 158503. https://doi.org/10.1155/2012/158503
[62]
Gadhave, R.V., Mahanwar, P.A., Gadekar, P.T. and Kasbe, P.S. (2020) A Study on the Effect of Starch-Polyvinyl Alcohol Blends by Addition of Citric Acid and Boric Acid for Enhancement in Performance Properties of Polyvinyl Acetate-Based Wood Adhesive. Journal of the Indian Academy of Wood Science, 17, 9-20. https://doi.org/10.1007/s13196-019-00249-6
[63]
Bonnefond, A., Reyes, Y., Peruzzo, P., Ronne, E., Fare, J., Paulis, M. and Leiza, J.R. (2013) Effect of the Incorporation of Modified Silicas on the Final Properties of Wood Adhesives. Macromolecular Reaction Engineering, 7, 527-537. https://doi.org/10.1002/mren.201300117
[64]
Ma, C.-C.M., Wu, H.-D., Chu, P.P. and Tseng, H.-T. (1997) Prediction of Thermodynamic Properties of Novolak-Type Phenolic Resin and Aliphatic Polyester Blends: Painter-Coleman Association Model Study of Compositional Homogeneity. Macromolecules, 30, 5443-5449. https://doi.org/10.1021/ma961251o
[65]
Gardner, D.J., Oporto, G.S., Mills, R. and Samir, M.A.S.A. (2008) Adhesion and Surface Issues in Cellulose and Nanocellulose. Journal of Adhesion Science and Technology, 22, 545-567. https://doi.org/10.1163/156856108X295509
[66]
Kim, S. and Kim, H.-J. (2005) Effect of Addition of Polyvinyl Acetate to Melamine-Formaldehyde Resin on the Adhesion and Formaldehyde Emission in Engineered Flooring. International Journal of Adhesion and Adhesives, 25, 456-461. https://doi.org/10.1016/j.ijadhadh.2005.01.001
[67]
Petkovi, G., Preproti, S.P. and Bani, D. (2017) Evaluation of Finished Product Quality Depeding on Paper Properties and Binding Technique. Politehnika i Dizajn, 5, 237-247.
[68]
Wen, N., Tang, Q., Chen, M. and Wu, L. (2008) Synthesis of PVAc/SiO2 Latices Stabilized by Silica Nanoparticles. Journal of Colloid and Interface Science, 320, 152-158. https://doi.org/10.1016/j.jcis.2007.11.059
Willett, J.L. and Finkenstadt, V.L. (2006) Reactive Extrusion of Starch-Polyacrylamide Graft Copolymers Using Various Starches. Journal of Polymers and the Environment, 14, 125-129. https://doi.org/10.1007/s10924-006-0002-y
[71]
Thomson, P. (2014) Book Binding Tutorial: Glues—Tips, Techniques, Types & Recipes. iBookBinding, Bookbinding Tutorials & Resources. https://www.ibookbinding.com/blog/bookbinding-gluing-tips-techniques-types-info/
[72]
Rebsamen, W. (1983) Adhesive Binding Methods and Techniques. In Book Production Industry, March 1978.
[73]
Paris, J. (2000) Adhesives for Paper, Board and Foils. International Journal of Adhesion and Adhesives, 20, 89-90. https://doi.org/10.1016/S0143-7496(99)00052-4
[74]
Packham, D.E., Ed. (2005) Handbook of Adhesion. John Wiley & Sons, Ltd., Chichester. https://doi.org/10.1002/0470014229
[75]
Kiatkamjornwong, S., Mongkolsawat, K. and Sonsuk, M. (2002) Synthesis and Property Characterization of Cassava Starch Grafted Poly[acrylamide-co-(maleic acid)] Superabsorbent via γ-Irradiation. Polymer (Guildf), 43, 3915-3924. https://doi.org/10.1016/S0032-3861(02)00224-0
[76]
Grüneberger, F., Künniger, T., Zimmermann, T. and Arnold, M. (2014) Rheology of Nanofibrillated Cellulose/Acrylate Systems for Coating Applications. Cellulose, 21, 1313-1326. https://doi.org/10.1007/s10570-014-0248-9
[77]
Liu, X., Fan, X.-D., Tang, M.-F. and Nie, Y. (2008) Synthesis and Characterization of Core-Shell Acrylate Based Latex and Study of Its Reactive Blends. International Journal of Molecular Sciences, 9, 342-354. https://doi.org/10.3390/ijms9030342
[78]
Liu, X., Zhang, X., Long, K., Zhu, X., Yang, J., Wu, Y., Luo, S. and Yang, S. (2012) PVA Wood Adhesive Modified with Sodium Silicate Cross-Linked Copolymer. Proceedings of 2012 International Conference on Biobase Material Science and Engineering, Changsha, 21-23 October 2012, 108-111. https://doi.org/10.1109/BMSE.2012.6466192
[79]
Voitovich, V.A. (2010) Curing Agents of Silicate Based Adhesives. Polymer Science, Series D, 3, 174-176. https://doi.org/10.1134/S1995421210030032
[80]
Huang, M.-W., Kuo, S.-W., Wu, H.-D., Chang, F.-C. and Fang, S.-Y. (2002) Miscibility and Hydrogen Bonding in Blends of Poly(vinyl acetate) with Phenolic Resin. Polymer (Guildf), 43, 2479-2487. https://doi.org/10.1016/S0032-3861(02)00007-1
[81]
López-Suevos, F. and Frazier, C.E. (2006) Fracture Cleavage Analysis of PVAc Latex Adhesives: Influence of Phenolic Additives. Holzforschung, 60, 313-317. https://doi.org/10.1515/HF.2006.050
[82]
López-Suevos, F. and Frazier, C.E. (2006) Rheology of Latex Films Bonded to Wood: Influence of Cross-Linking. Holzforschung, 60, 47-52. https://doi.org/10.1515/HF.2006.009
[83]
Fanta, G.F., Felker, F.C. and Shogren, R.L. (2004) Graft Polymerization of Acrylonitrile onto Spherocrystals Formed from Jet Cooked Cornstarch. Carbohydrate Polymers, 56, 77-84. https://doi.org/10.1016/j.carbpol.2003.12.004
[84]
Jorfi, M. and Foster, E.J. (2015) Recent Advances in Nanocellulose for Biomedical Applications. Journal of Applied Polymer Science, 132. https://doi.org/10.1002/app.41719
[85]
Lei, H., Du, G., Pizzi, A. and Celzard, A. (2008) Influence of Nanoclay on Urea-Formaldehyde Resins for Wood Adhesives and Its Model. Journal of Applied Polymer Science, 109, 2442-2451. https://doi.org/10.1002/app.28359
[86]
Trache, D., Tarchoun, A.F., Derradji, M., Hamidon, T.S., Masruchin, N., Brosse, N. and Hussin, M.H. (2020) Nanocellulose: From Fundamentals to Advanced Applications. Frontiers in Chemistry, 8, Article 392. https://doi.org/10.3389/fchem.2020.00392
[87]
Jiang, G. and Cai, L. (n.d.) Montmorillonite-Modified PVAc Adhesive, and Preparation Method Thereof. CN109796915.
[88]
Xu, M. (n.d.) Polyvinyl Acetate Emulsion Adhesive Incremental Additive and Its Manufacture Process. CN102660204.
[89]
Taghiyari, H.R., Majidi, R. and Jahangiri, A. (2016) Adsorption of Nanowollastonite on Cellulose Surface: Effects on Physical and Mechanical Properties of Medium-Density Fiberboard (MDF). Cerne, 22, 215-222. https://doi.org/10.1590/0104776020162222146
[90]
Liu, J., Howard, G.D., Lewis, S.H., Barros, M.D. and Stansbury, J.W. (2012) A Study of Shrinkage Stress Reduction and Mechanical Properties of Nanogel-Modified Resin Systems. European Polymer Journal, 48, 1819-1828. https://doi.org/10.1016/j.eurpolymj.2012.08.009
[91]
Stöckel, F., Konnerth, J., Moser, J., Kantner, W. and Gindl-Altmutter, W. (2012) Micromechanical Properties of the Interphase in pMDI and UF Bond Lines. Wood Science and Technology, 46, 611-620. https://doi.org/10.1007/s00226-011-0432-0
[92]
Frihart, C.R. (2009) Adhesive Groups and How They Relate to the Durability of Bonded Wood. Journal of Adhesion Science and Technology, 23, 601-617. https://doi.org/10.1163/156856108X379137
[93]
Gaaz, T., Sulong, A., Akhtar, M., Kadhum, A., Mohamad, A. and Al-Amiery, A. (2015) Properties and Applications of Polyvinyl Alcohol, Halloysite Nanotubes and Their Nanocomposites. Molecules, 20, 22833-22847. https://doi.org/10.3390/molecules201219884
[94]
Lou, Y. and Shang, S. (n.d.) One Kind of Nanosilica-Containing Reinforced Modified Polyvinyl Acetate Emulsion Adhesive for Pencil and Preparation Method Thereof. CN104974690.
[95]
Chen, L., Xiong, Z., Xiong, H., Wang, Z., Din, Z., Nawaz, A., Wang, P. and Hu, C. (2018) Effects of Nano-TiO2 on Bonding Performance, Structure Stability and Film-Forming Properties of Starch-g-VAc Based Wood Adhesive. Carbohydrate Polymers, 200, 477-486. https://doi.org/10.1016/j.carbpol.2018.08.023
[96]
Mapari, S., Mestry, S. and Mhaske, S.T. (2021) Developments in Pressure-Sensitive Adhesives: A Review. Polymer Bulletin, 78, 4075-4108. https://doi.org/10.1007/s00289-020-03305-1
[97]
Gadhave, R.V., Mahanwar, P.A. and Gadekar, P.T. (2017) Factor Affecting Gel Time/Process-Ability of Urea Formaldehyde Resin Based Wood Adhesives. Open Journal of Polymer Chemistry, 7, 33-42. https://doi.org/10.4236/ojpchem.2017.72003
[98]
Jiang, W., Tomppo, L., Pakarinen, T., Sirviö, J.A., Liimatainen, H. and Haapala, A.T. (2018) Effect of Cellulose Nanofibrils on the Bond Strength of Polyvinyl Acetate and Starch Adhesives for Wood. BioResources, 13, 2283-2292. https://doi.org/10.15376/biores.13.2.2283-2292
[99]
Fanta, G.F., Burr, R.C., Doane, W.M. and Russell, C.R. (1979) Graft Polymerization of Vinyl Acetate onto Starch. Saponification to Starch-g-Poly(vinyl alcohol). Journal of Applied Polymer Science, 23, 229-240. https://doi.org/10.1002/app.1979.070230121
[100]
Din, Z.U., Xiong, H., Wang, Z., Chen, L., Ullah, I., Fei, P. and Ahmad, N. (2018) Effects of Different Emulsifiers on the Bonding Performance, Freeze-Thaw Stability and Retrogradation Behavior of the Resulting High Amylose Starch-Based Wood Adhesive. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 538, 192-201. https://doi.org/10.1016/j.colsurfa.2017.11.002
[101]
Matveev, Y., van Soest, J.J., Nieman, C., Wasserman, L., Protserov, V., Ezernitskaja, M. and Yuryev, V. (2001) The Relationship between Thermodynamic and Structural Properties of Low and High Amylose Maize Starches. Carbohydrate Polymers, 44, 151-160. https://doi.org/10.1016/S0144-8617(00)00211-3
[102]
Chen, J. and Chen, J. (2001) Starch-Based White Adhesive Emulsion. CN1283661.
[103]
Liu, L. (n.d.) Preparation of Starch-Modified Latex for Latex-Based Adhesive. CN101993671.
[104]
Ali, S.F.A. (2014) Biodegradation Properties of Poly-ε-Caprolactone, Starch and Cellulose Acetate Butyrate Composites. Journal of Polymers and the Environment, 22, 359-364. https://doi.org/10.1007/s10924-014-0675-6
[105]
Gu, Y., Cheng, L., Gu, Z., Hong, Y., Li, Z. and Li, C. (2019) Preparation, Characterization and Properties of Starch-Based Adhesive for Wood-Based Panels. International Journal of Biological Macromolecules, 134, 247-254. https://doi.org/10.1016/j.ijbiomac.2019.04.088
Zhang, Y., Pang, B., Yang, S., Fang, W., Yang, S., Yuan, T.-Q. and Sun, R.-C. (2018) Improvement in Wood Bonding Strength of Poly(vinyl acetate-butyl acrylate) Emulsion by Controlling the Amount of Redox Initiator. Materials (Basel), 11, Article 89. https://doi.org/10.3390/ma11010089
[108]
Averous, L. (2000) Properties of Thermoplastic Blends: Starch-Polycaprolactone. Polymer (Guildf), 41, 4157-4167. https://doi.org/10.1016/S0032-3861(99)00636-9
[109]
Agarwal, M., Koelling, K.W. and Chalmers, J.J. (1998) Characterization of the Degradation of Polylactic Acid Polymer in a Solid Substrate Environment. Biotechnology Progress, 14, 517-526. https://doi.org/10.1021/bp980015p
[110]
Moon, R.J., Martini, A., Nairn, J., Simonsen, J. and Youngblood, J. (2011) Cellulose Nanomaterials Review: Structure, Properties and Nanocomposites. Chemical Society Reviews, 40, 3941-3994. https://doi.org/10.1039/c0cs00108b
[111]
Khan, U., May, P., Porwal, H., Nawaz, K. and Coleman, J.N. (2013) Improved Adhesive Strength and Toughness of Polyvinyl Acetate Glue on Addition of Small Quantities of Graphene. ACS Applied Materials & Interfaces, 5, 1423-1428. https://doi.org/10.1021/am302864f
[112]
Kajtna, J. and Šebenik, U. (2017) Novel Acrylic/Nanocellulose Microsphere with Improved Adhesive Properties. International Journal of Adhesion and Adhesives, 74, 100-106. https://doi.org/10.1016/j.ijadhadh.2016.11.013
[113]
Boujemaoui, A., Mazières, S., Malmström, E., Destarac, M. and Carlmark, A. (2016) SI-RAFT/MADIX Polymerization of Vinyl Acetate on Cellulose Nanocrystals for Nanocomposite Applications. Polymer (Guildf), 99, 240-249. https://doi.org/10.1016/j.polymer.2016.07.013
[114]
Kaboorani, A., Riedl, B., Blanchet, P., Fellin, M., Hosseinaei, O. and Wang, S. (2012) Nanocrystalline Cellulose (NCC): A Renewable Nano-Material for Polyvinyl Acetate (PVA) Adhesive. European Polymer Journal, 48, 1829-1837. https://doi.org/10.1016/j.eurpolymj.2012.08.008
[115]
Chaabouni, O. and Boufi, S. (2017) Cellulose Nanofibrils/Polyvinyl Acetate Nanocomposite Adhesives with Improved Mechanical Properties. Carbohydrate Polymers, 156, 64-70. https://doi.org/10.1016/j.carbpol.2016.09.016
[116]
Aydemir, D., Gündüz, G., Aşık, N. and Wang, A. (2016) The Effects of Poly(vinyl acetate) Filled with Nanoclay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood. Drvna Industrija, 67, 17-24. https://doi.org/10.5552/drind.2016.1441
[117]
Ben Mabrouk, A., Dufresne, A. and Boufi, S. (2020) Cellulose Nanocrystal as Ecofriendly Stabilizer for Emulsion Polymerization and Its Application for Waterborne Adhesive. Carbohydrate Polymers, 229, Article ID: 115504. https://doi.org/10.1016/j.carbpol.2019.115504
[118]
Dhawale, P.V., Vineeth, S.K., Gadhave, R.V. and Mahanwar, P.A. (2021) Cellulose Stabilized Polyvinyl Acetate Emulsion: Review. Open Journal of Organic Polymer Materials, 11, 51-66. https://doi.org/10.4236/ojopm.2021.112002
[119]
Wang, S., Chen, L. and Tong, Y. (2006) Structure-Property Relationship in Chitosan-Based Biopolymer/Montmorillonite Nanocomposites. Journal of Polymer Science Part A: Polymer Chemistry, 44, 686-696. https://doi.org/10.1002/pola.20941
[120]
Mancini, E., Antonelli, M.G., Zobel, P.B. and Sasso, M. (2019) Characterization and Analytical Parametrization of Composite in Cellulose Fibre and PVA Matrix. Composites Part B: Engineering, 172, 496-505. https://doi.org/10.1016/j.compositesb.2019.05.093
[121]
Rhim, J.-W. and Ng, P.K.W. (2007) Natural Biopolymer-Based Nanocomposite Films for Packaging Applications. Critical Reviews in Food Science and Nutrition, 47, 411-433. https://doi.org/10.1080/10408390600846366
[122]
Dastjerdi, Z., Cranston, E.D. and Dubé, M.A. (2017) Synthesis of Poly(n-butyl acrylate/methyl methacrylate)/CNC Latex Nanocomposites via In Situ Emulsion Polymerization. Macromolecular Reaction Engineering, 11, Article ID: 1700013. https://doi.org/10.1002/mren.201700013
[123]
Guilbert, S., Cuq, B. and Gontard, N. (1997) Recent Innovations in Edible and/or Biodegradable Packaging Materials. Food Additives & Contaminants, 14, 741-751. https://doi.org/10.1080/02652039709374585
[124]
Kong, F., Wang, S., Price, J.T., Konduri, M.K.R. and Fatehi, P. (2015) Water Soluble Kraft Lignin-Acrylic Acid Copolymer: Synthesis and Characterization. Green Chemistry, 17, 4355-4366. https://doi.org/10.1039/C5GC00228A
[125]
Wang, S., Sun, Y., Kong, F., Yang, G. and Fatehi, P. (2016) Preparation and Characterization of Lignin-Acrylamide Copolymer as a Paper Strength Additive. BioResources, 11, 1765-1783. https://doi.org/10.15376/biores.11.1.1765-1783
[126]
Abdollahi, M., Pourmahdi, M. and Nasiri, A.R. (2018) Synthesis and Characterization of Lignosulfonate/Acrylamide Graft Copolymers and Their Application in Environmentally Friendly Water-Based Drilling Fluid. Journal of Petroleum Science and Engineering, 171, 484-494. https://doi.org/10.1016/j.petrol.2018.07.065
[127]
Fornes, T.D. and Paul, D.R. (2003) Modeling Properties of Nylon 6/Clay Nanocomposites Using Composite Theories. Polymer (Guildf), 44, 4993-5013. https://doi.org/10.1016/S0032-3861(03)00471-3
[128]
Liu, H. and Chung, H. (2016) Self-Healing Properties of Lignin-Containing Nanocomposite: Synthesis of Lignin-Graft-Poly(5-acetylaminopentyl acrylate) via RAFT and Click Chemistry. Macromolecules, 49, 7246-7256. https://doi.org/10.1021/acs.macromol.6b01028
[129]
Liu, Z., Xu, D., Xu, L., Kong, F., Wang, S. and Yang, G. (2018) Preparation and Characterization of Softwood Kraft Lignin Copolymers as a Paper Strength Additive. Polymers (Basel), 10, Article 743. https://doi.org/10.3390/polym10070743
[130]
Liu, H. and Chung, H. (2017) Lignin-Based Polymers via Graft Copolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 55, 3515-3528. https://doi.org/10.1002/pola.28744
[131]
Zhang, N., Wang, S., Gibril, M.E. and Kong, F. (2020) The Copolymer of Polyvinyl Acetate Containing Lignin-Vinyl Acetate Monomer: Synthesis and Characterization. European Polymer Journal, 123, Article ID: 109411. https://doi.org/10.1016/j.eurpolymj.2019.109411
[132]
Don, T.-M., King, C.-F. and Chiu, W.-Y. (2002) Preparation of Chitosan-Graft-Poly(vinyl acetate) Copolymers and Their Adsorption of Copper Ion. Polymer Journal, 34, 418-425. https://doi.org/10.1295/polymj.34.418
[133]
Qua, E.H., Hornsby, P.R., Sharma, H.S.S., Lyons, G. and McCall, R.D. (2009) Preparation and Characterization of Poly(vinyl alcohol) Nanocomposites Made from Cellulose Nanofibers. Journal of Applied Polymer Science, 113, 2238-2247. https://doi.org/10.1002/app.30116
[134]
Nishiyama, Y., Sugiyama, J., Chanzy, H. and Langan, P. (2003) Crystal Structure and Hydrogen Bonding System in Cellulose Iα from Synchrotron X-Ray and Neutron Fiber Diffraction. Journal of the American Chemical Society, 125, 14300-14306. https://doi.org/10.1021/ja037055w
[135]
Jiménez Saelices, C., Save, M. and Capron, I. (2019) Synthesis of Latex Stabilized by Unmodified Cellulose Nanocrystals: The Effect of Monomers on Particle Size. Polymer Chemistry, 10, 727-737. https://doi.org/10.1039/C8PY01575A
[136]
Zhao, R., Torley, P. and Halley, P.J. (2008) Emerging Biodegradable Materials: Starch- and Protein-Based Bio-Nanocomposites. Journal of Materials Science, 43, 3058-3071. https://doi.org/10.1007/s10853-007-2434-8
[137]
Zeng Q.H., Yu A.B., Lu, G.Q.(M.) and Paul, D.R. (2005) Clay-Based Polymer Nanocomposites: Research and Commercial Development. Journal of Nanoscience and Nanotechnology, 5, 1574-1592. https://doi.org/10.1166/jnn.2005.411
[138]
Dennis, H.R., Hunter, D.L., Chang, D., Kim, S., White, J.L., Cho, J.W. and Paul, D.R. (2001) Effect of Melt Processing Conditions on the Extent of Exfoliation in Organoclay-Based Nanocomposites. Polymer (Guildf), 42, 9513-9522. https://doi.org/10.1016/S0032-3861(01)00473-6
[139]
Salvini, A., Saija, L.M., Finocchiaro, S., Gianni, G., Giannelli, C. and Tondi, G. (2009) A New Methodology in the Study of PVAc-Based Adhesive Formulations. Journal of Applied Polymer Science, 114, 3841-3854. https://doi.org/10.1002/app.31032
[140]
Zhang, Y.-R., Wang, X.-L., Zhao, G.-M. and Wang, Y.-Z. (2013) Influence of Oxidized Starch on the Properties of Thermoplastic Starch. Carbohydrate Polymers, 96, 358-364. https://doi.org/10.1016/j.carbpol.2013.03.093
[141]
Takizawa, F.F., de Oliveira da Silva, G., Konkel, F.E. and Demiate, I.M. (2004) Characterization of Tropical Starches Modified with Potassium Permanganate and Lactic Acid. Brazilian Archives of Biology and Technology, 47, 921-931. https://doi.org/10.1590/S1516-89132004000600012
[142]
Brown, N.R., Loferski, J.R. and Frazier, C.E. (2007) Cross-Linking Poly(vinyl acetate-co-N-methylolacrylamide) Latex Adhesive Performance Part II: Fracture Mechanics and Microscopic Durability Studies. International Journal of Adhesion and Adhesives, 27, 554-561. https://doi.org/10.1016/j.ijadhadh.2006.10.003
[143]
Sangseethong, K., Termvejsayanon, N. and Sriroth, K. (2010) Characterization of Physicochemical Properties of Hypochlorite- and Peroxide-Oxidized Cassava Starches. Carbohydrate Polymers, 82, 446-453. https://doi.org/10.1016/j.carbpol.2010.05.003
[144]
Mohsen-Nia, M. and Mohammad Doulabi, F.S. (2011) Synthesis and Characterization of Polyvinyl Acetate/Montmorillonite Nanocomposite by in Situ Emulsion Polymerization Technique. Polymer Bulletin, 66, 1255-1265. https://doi.org/10.1007/s00289-010-0399-2
[145]
Salvini, A., Saija, L.M., Lugli, M., Cipriani, G. and Giannelli, C. (2010) Synthesis of Modified Poly(vinyl acetate) Adhesives. Journal of Adhesion Science and Technology, 24, 1629-1651. https://doi.org/10.1163/016942410X507731
[146]
Zou, H., Wu, S. and Shen, J. (2008) Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications. Chemical Reviews, 108, 3893-3957. https://doi.org/10.1021/cr068035q
[147]
Zecha, H. (n.d.) Heat Resistant Emulsion Polymer Dispersion, Manufacture of Aqueous Dispersion, and Adhesive Formulation. EP2138548.
[148]
Brown, N.R. and Frazier, C.E. (2007) Cross-Linking Poly[(vinyl acetate)-co-N-me-thylolacrylamide] Latex Adhesive Performance Part I: N-Methylolacrylamide (NMA) Distribution. International Journal of Adhesion and Adhesives, 27, 547-553. https://doi.org/10.1016/j.ijadhadh.2006.10.002
[149]
Liu, Y., Zang, Y.X., Wang, X.H. and Dong, L.M. (2019) Preparation and Cross-Linking Properties of VAc/DAAM Copolymer Emulsion. Materials Science Forum, 953, 141-146. https://doi.org/10.4028/www.scientific.net/MSF.953.141
[150]
Ouzas, A., Niinivaara, E., Cranston, E.D. and Dubé, M.A. (2018) In Situ Semibatch Emulsion Polymerization of 2-Ethyl Hexyl Acrylate/n-Butyl Acrylate/Methyl Methacrylate/Cellulose Nanocrystal Nanocomposites for Adhesive Applications. Macromolecular Reaction Engineering, 12, Article ID: 1700068. https://doi.org/10.1002/mren.201700068
[151]
Vikman, M., Vartiainen, J., Tsitko, I. and Korhonen, P. (2015) Biodegradability and Compostability of Nanofibrillar Cellulose-Based Products. Journal of Polymers and the Environment, 23, 206-215. https://doi.org/10.1007/s10924-014-0694-3
[152]
Geng, S., Shah, F.U., Liu, P., Antzutkin, O.N. and Oksman, K. (2017) Plasticizing and Crosslinking Effects of Borate Additives on the Structure and Properties of Poly(vinyl acetate). RSC Advances, 7, 7483-7491. https://doi.org/10.1039/C6RA28574K
[153]
Chu, Y., Cheng, F., Wang, Z., Liu, C. and Liu, M. (n.d.) N-Methylolacrylamide-Modified Water-Resistant Polyvinyl Acetate Adhesive for Wood and Its Preparation Method. CN104371605.
[154]
Ferdosian, F., Pan, Z., Gao, G. and Zhao, B. (2017) Bio-Based Adhesives and Evaluation for Wood Composites Application. Polymers (Basel), 9, Article 70. https://doi.org/10.3390/polym9020070
[155]
Mudge, G. and Hespe, P.R. (1990) Water-Resistant Vinyl Polymer Woodworking Adhesives. EP394774.
[156]
Jyothi, A.N. and Carvalho, A.J.F. (2013) Starch-g-Copolymers: Synthesis, Properties and Applications. In: Kalia, S. and Sabaa, M., Eds., Polysaccharide Based Graft Copolymers, Springer Berlin Heidelberg, Berlin, Heidelberg, 59-109. https://doi.org/10.1007/978-3-642-36566-9_3
[157]
Lanthong, P., Nuisin, R. and Kiatkamjornwong, S. (2006) Graft Copolymerization, Characterization, and Degradation of Cassava Starch-g-Acrylamide/Itaconic Acid Superabsorbents. Carbohydrate Polymers, 66, 229-245. https://doi.org/10.1016/j.carbpol.2006.03.006
[158]
Schroegel, O., Bauers, P. and Pankow, F. (2016) Aqueous Polymer Dispersions for Adhesives. DE102015200498.
[159]
Kalapathy, U., Hettiarachchy, N.S., Myers, D. and Hanna, M.A. (1995) Modification of Soy Proteins and Their Adhesive Properties on Woods. Journal of the American Oil Chemists’ Society, 72, 507-510. https://doi.org/10.1007/BF02638849
[160]
Zecha, H. and Kuenstle, H. (2007) Vinyl Ester Based Polymer Latex Composition and Process of Making the Same. US20070088120.
[161]
Luo, Z., Liu, P., Xu, W., Fu, J., Xu, L. and Song, J. (2014) Production of Water-Proof Heat-Resistant Flame-Retardant Veneering Adhesive for Furniture Panel. CN103725228.
[162]
Shimizu, H., Iwasaki, K., Yanaida, K. and Oshima, S. (1998) Vinyl Acetate Copolymer-Based Aqueous Adhesives and Their Manufacture. JP10036801.
[163]
Qiao, Z., Gu, J., Zuo, Y., Tan, H. and Zhang, Y. (2014) The Effect of Carboxymethyl Cellulose Addition on the Properties of Starch-Based Wood Adhesive. BioResources, 9, 6117-6129. https://doi.org/10.15376/biores.9.4.6117-6129
Herrmann, F. (1973) Poly(vinyl acetate) Coating and Adhesive Compositions. DE2158604.
[169]
Bhattacharyya, S.N. and Maldas, D. (1984) Graft Copolymerization onto Cellulosics. Progress in Polymer Science, 10, 171-270. https://doi.org/10.1016/0079-6700(84)90002-9
[170]
Zecha, R. and Weissgerber, H. (2008) Formaldehyde-Free Emulsion Polymer Dispersion Composition Including Polyvinyl Alcohol as Colloidal Stabilizer Providing Improved Heat Resistance. EP2000485.
[171]
Xu, W., An, Q., Hao, L., Zhang, D. and Zhang, M. (2013) Synthesis and Characterization of Self-Crosslinking Fluorinated Polyacrylate Soap-Free Latices with Core-Shell Structure. Applied Surface Science, 268, 373-380. https://doi.org/10.1016/j.apsusc.2012.12.104
[172]
Agirre, A., Weitzel, H.-P., Hergeth, W.-D. and Asua, J.M. (2015) Process Intensification of VAc-VeoVa10 Latex Production. Chemical Engineering Journal, 266, 34-47. https://doi.org/10.1016/j.cej.2014.12.053
[173]
Abad, C., De La Cal, J.C. and Asua, J.M. (1995) Emulsion Copolymerization of Vinyl Esters in Continuous Reactors: Comparison between Loop and Continuous Stirred Tank Reactors. Journal of Applied Polymer Science, 56, 419-424. https://doi.org/10.1002/app.1995.070560402
[174]
Tanimoto, N. and Inomata, S. (2001) Aqueous Emulsions with Good Water Resistance and Storage Stability for Adhesives. JP2001106855.
[175]
Kushida, M. (n.d.) Method for Manufacturing Water-Based Adhesive with Excellent Water Resistance Property. JP5869165.
[176]
Saito, M. and Shibuya, M. (n.d.) Storage-Stable Water-Resistant Vinyl Polymer Emulsions Having Stable Adhesive Strength. JP11092609.
[177]
Prabhu, R., Jagtap, R. and Digar, M. (2020) Study on Incorporating Wattle Tannin in Polyvinyl Acetate Emulsion and Its Effect on Properties for Wood Bonding Application. SN Applied Sciences, 2, Article No. 1722. https://doi.org/10.1007/s42452-020-03516-1
[178]
Tsai, G.-D., Lin, J.-J. and Fan, L.-S. (n.d.) Water-Resistant Polyvinyl Acetate Aqueous Emulsion Used as Adhesive for Wood Material. US20040082706.
[179]
Kushida, M. (n.d.) Water-Based Adhesive with Good Water Resistance. JP2017095552.
[180]
Orford, P.D., Ring, S.G., Carroll, V., Miles, M.J. and Morris, V.J. (1987) The Effect of Concentration and Botanical Source on the Gelation and Retrogradation of Starch. Journal of the Science of Food and Agriculture, 39, 169-177. https://doi.org/10.1002/jsfa.2740390210
[181]
Zhu, M., Qiao, W., Liu, H. and Sun, Y. (2008) Synthesis of a Novel Polymerizable Surfactant and Its Application in the Emulsion Polymerization of Vinyl Acetate, Butyl Acrylate, Veova 10, and Hexafluorobutyl Methacrylate. Journal of Applied Polymer Science, 107, 624-628. https://doi.org/10.1002/app.27123
[182]
Zuber, M., Zia, K.M., Bhatti, I.A., Jamil, T., Fazal-ur-Rehman and Rizwan, A. (2012) Modification of Cellulosic Fabric Using Polyvinyl Alcohol, Part-II: Colorfastness Properties. Carbohydrate Polymers, 87, 2439-2446. https://doi.org/10.1016/j.carbpol.2011.11.014
[183]
Lu, S., Duan, M. and Lin, S. (2003) Synthesis of Superabsorbent Starch-Graft-Poly(potassium acrylate-co-acrylamide) and Its Properties. Journal of Applied Polymer Science, 88, 1536-1542. https://doi.org/10.1002/app.12025
[184]
Oh, J.K., Wu, J., Winnik, M.A., Craun, G.P., Rademacher, J. and Farwaha, R. (2002) Emulsion Copolymerization of Vinyl Acetate and Butyl Acrylate in the Presence of Fluorescent Dyes. Journal of Polymer Science Part A: Polymer Chemistry, 40, 1594-1607. https://doi.org/10.1002/pola.10216
[185]
Noro, K. (1970) Emulsion Polymerisation of Vinyl Acetate in Relation to the Chemical Structure of Polyvinyl Alcohol. British Polymer Journal, 2, 128-134. https://doi.org/10.1002/pi.4980020206
[186]
Schlappa, S., Brenker, L.J., Bressel, L., Hass, R. and Münzberg, M. (2021) Process Characterization of Polyvinyl Acetate Emulsions Applying Inline Photon Density Wave Spectroscopy at High Solid Contents. Polymers (Basel), 13, Article 669. https://doi.org/10.3390/polym13040669
[187]
Asai, M., Yano, D., Mitsuda, M., Kaede, T., Ishii, K. and Matsumoto, N. (n.d.) Plasticizer-Free Adhesive Emulsion Compositions with Low Film-Forming Temperature. JP2003176468.
[188]
Bugada, D.C. and Rudin, A. (1984) Characterization of Poly(vinyl alcohol—acetate) by 13C n.m.r. and Thermal Analyses. Polymer (Guildf), 25, 1759-1766. https://doi.org/10.1016/0032-3861(84)90248-9
[189]
Atanase, L. and Riess, G. (2011) Thermal Cloud Point Fractionation of Poly(vinyl alcohol-co-vinyl acetate): Partition of Nanogels in the Fractions. Polymers (Basel), 3, 1065-1075. https://doi.org/10.3390/polym3031065
[190]
Atanase, L.I. and Riess, G. (2010) Poly(Vinyl alcohol-co-vinyl acetate) Complex Formation with Anionic Surfactants Particle Size of Nanogels and Their Disaggregation with Sodium Dodecyl Sulfate. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 355, 29-36. https://doi.org/10.1016/j.colsurfa.2009.11.024
[191]
Zecha, H. and Weitzel, H.-P. (n.d.) Method for Producing Vinyl Ester Polymers Having Specifically Settable Dispersity and Low Polydispersity. US 9,650,507 B2.
[192]
Matsumoto, M. (n.d.) Plasticizer-Free Vinyl Acetate Polymer Adhesive Compositions with Low Residual Monomer Content, and Their Manufacture. JP2006291043.
[193]
Liu, J. and Hoffmann, H. (2004) Hydrogels in Aqueous Phases of Polyvinylalcohol (PVA), Surfactants and Clay Minerals. Colloid and Polymer Science, 283, 24-32. https://doi.org/10.1007/s00396-004-1081-8
[194]
Sato, M., Matsumoto, K., Nishimura, M. and Yano, A. (2005) Plasticizer-Free Polymer Emulsion Adhesive Compositions with Good Stability at Low Temperature and Their Manufacture. JP2005097416.
