Development and Testing of a Method to Estimate the Mineral Composition of Ore from Chemical Assays with a View toward Geometallurgy: Application to an Iron Ore Concentrator
For complex orebodies in which the valuable metal is carried by several minerals that respond differently to the concentration process, an ore block model should not be characterized solely with elemental assays, as this information is not sufficient to anticipate the mill performances. Data from an iron ore concentrator is used to demonstrate the idea. A method is then proposed to estimate the mineral contents of ore samples from elemental assays. The method can readily be extended to combine the estimation of the mineral contents in the feed of the mill with an estimation of the recovery of these minerals into the products of the concentrator. These mineral recoveries can subsequently be incorporated into a block model to predict the concentrator response to the processing of an ore block.
References
[1]
Lishchuk, V., Koch, P.H., Ghorbani, Y. and Butcher, A.R. (2020) Towards Integrated Geometallurgical Approach: Critical Review of Current Practices and Future Trends. Minerals Engineering, 145, Article ID: 106072. https://doi.org/10.1016/j.mineng.2019.106072
[2]
Rincon, J., Gaydardzhiev, S. and Stamenov, L. (2019) Coupling Comminution Indices and Mineralogical Features as an Approach to a Geometallurgical Characterization of a Copper Ore. Minerals Engineering, 130, 57-66. https://doi.org/10.1016/j.mineng.2018.10.007
[3]
Suazo, C.J., Kracht, W. and Alruiz, O.M. (2010) Geometallurgical Modelling of the Collahuasi Flotation Circuit. Minerals Engineering, 23, 137-142. https://doi.org/10.1016/j.mineng.2009.11.005
[4]
Allaire, A., Leblanc, I., Richard, P.L., Girard, M. and Roberge, P.R. (2019) Bloom Lake Mine Feasibility Study Phase 2. BBA, Montréal.
[5]
Lavoie, F. and Verret, F.-O. (2021) Bloom Lake Flowsheet Improvement and Commissioning. Proceedings of the 53rd Annual Canadian Mineral Processors’ Conference, Ottawa, 19-21 January 2021, 102-129.
[6]
Wills, B.A. and Napier-Munn, T. (2006) Wills’ Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery. 8th Edition, Butterworth-Heinemann, Waltham, 637.
[7]
Lévesque, S., Couet, F., Pérez-Barnuevo, L. and Hennessey, C. (2016) Mineralogical Tools for Ore Characterization-Key Data at All Steps of Iron Ore Concentration. Proceedings of the XXVIII International Mineral Processing Congress (IMPC 2016), Quebec City, 11-15 September 2016, 831-843.
[8]
Morrison, R.D. (2008) An Introduction to Metal Balancing and Reconciliation. Julius Kruttschnitt Mineral Research Centre, Indooroopilly.
[9]
Pérez-Barnuevo, L., Lévesque, S. and Bazin, C. (2018) Automated Recognition of Drill Core Textures: A Geometallurgical Tool for Mineral Processing Prediction. Minerals Engineering, 118, 87-96. https://doi.org/10.1016/j.mineng.2017.12.015
[10]
Rapiscan® Systems (2022) Satmagan 135. https://www.rapiscansystems.com/en/products/satmagan-135
[11]
Weissenborn, P.K., Dunn, J.G. and Warren, L.J. (1994) Quantitative Thermogravimetric Analysis of Haematite, Goethite and Kaolinite in Western Australian Iron Ores. Thermochimica Acta, 239, 147-156. https://doi.org/10.1016/0040-6031(94)87063-2
[12]
Whiten, B. (2007) Calculation of Mineral Composition from Chemical Assays. Mineral Processing and Extractive Metallurgy Review, 29, 83-97. https://doi.org/10.1080/08827500701257860
[13]
Viczian, I. and Földvári, M. (2011) Handbook of the Thermogravimetric System of Minerals and Its Use in Geological Practice: Occasional Papers of the Geological Institute of Hungary. Geological Institute of Hungary, Budapest.
[14]
Press, W.H., Teukolsky, S.A., Vetterling, W.T. and Flannery, B.P. (2007) Numerical recipes: The Art of Scientific Computing. 3rd Edition, Cambridge University Press, Cambridge.
[15]
Sadeghi, M., Hodouin, D. and Bazin, C. (2018) Mineral Processing Plant Data Reconciliation Including Mineral Mass Balance Constraints. Minerals Engineering, 123, 117-127. https://doi.org/10.1016/j.mineng.2018.04.023
[16]
Bazin, C., Sadeghi, M. and Roy, J. (2016) Tracking Mineral Contents of the Ore from Daily Production Samples. Proceedings of the 47th Canadian Mineral Processors’ Annual Conference, Ottawa, 18-21 January 2016, 32-49.
[17]
Sadeghi, M. and Bazin, C. (2020) The Use of Process Analysis and Simulation to Identify Paths to Improve the Operation of an Iron Ore Gravity Concentration Circuit. Advances in Chemical Engineering and Science, 10, 149-170. https://doi.org/10.4236/aces.2020.103011
[18]
Bazin, C., Payenzo, G.M., Desnoyers, M., Gosselin, C. and Chevalier, G. (2012) The Use of Simulation for Process Diagnosis: Application to a Gravity Separator. International Journal of Mineral Processing, 104-105, 11-16. https://doi.org/10.1016/j.minpro.2011.11.009
[19]
Praes, P.E., de Albuquerque, R.O. and Luz, A.F.O. (2013) Recovery of Iron Ore Tailings by Column Flotation. Journal of Minerals and Materials Characterization and Engineering, 1, 212-216. https://doi.org/10.4236/jmmce.2013.15033
