|
Smart Grid 2022
35kV电力电缆快插接头关键内部结构设计研究
|
Abstract:
在35kV电力电缆快插接头结构设计中,接头内部电场主要靠两端应力锥结构和中间内屏蔽层结构进行处理,避免接头内部出现局部电场强度过高,导致接头高压击穿。本文通过maxwell有限元分析方法,仿真出应力锥和内屏蔽层在不同的设计参数下,接头内部的电场大小及分布情况,找出应力锥和内屏蔽层设计的最优解,为将来此类产品提供设计选择。
In the structural design of 35kV power cable quick-plug joint, the internal electric field of the joint is mainly handled by the stress cone structure at both ends and the inner shielding layer structure in the middle to avoid local high electric field intensity inside the joint, resulting in high voltage breakdown of the joint. In this paper, the maxwell finite element analysis method is used to simulate the magnitude and distribution of the electric field inside the joint under different design parameters of the stress cone and the inner shielding layer, and find the optimal solution for the design of the stress cone and the inner shielding layer, which is the best solution for the future. Products offer design options.
[1] | 李国倡, 梁箫剑, 魏艳慧, 苏国强, 雷清泉. 配电电缆附件复合绝缘界面缺陷类型和位置对电场分布的影响研究[J]. 电工技术学报, 2022, 37(11): 2707-2715. |
[2] | 刘英, 苏宇, 李文沛. 10kV XLPE电缆接头的电场模拟方法研究[J]. 高压电器, 2016, 52(4): 30-35. |
[3] | 蒋晓娟, 梁惟钢, 夏俊峰, 孙建生. 35kV电力电缆冷缩式中间接头典型缺陷电场计算及故障分析[J]. 绝缘材料, 2015(11): 59-63+68. |
[4] | 孔德武, 周明阳, 徐玮, 赵毅. 电缆附件的电场数值计算和优化设计[J]. 电线电缆, 1997(3): 7-10. |
[5] | 余海涛, 邵可玉, 罗俊华. 用有限元法优化高压电缆参数[J]. 高电压技术, 2004, 30(3): 3-4+8. |