Based on the Dikken analytical calculation method of wellbore pressure loss under single-phase fluid and turbulent flow conditions, the correlation model between horizontal well output and horizontal section length and horizontal section distributed pressure difference is constructed. The influence degree of wellbore pressure loss on daily oil production of horizontal well, horizontal section pressure and production effect of horizontal well under different horizontal well lengths is analyzed, which provides certain reference for the design of horizontal well length and well layout.
References
[1]
Stone, T.W., Edmunds, N.R. and Kristoff, B.J. (1989) A Comprehensive Wellbore/Reservoir Simulator. SPE Symposium on Reservoir Simulation, Houston, February 1989, 18419. https://doi.org/10.2118/18419-MS
[2]
Permadi, P. (1998) Ef-fect of Drainage Area and Producing Rate on Horizontal-Well Oil Recovery in Bottom. SPE India Oil and Gas Conference and Exhibition, New Delhi, February 1998, 39557. https://doi.org/10.2118/39557-MS
[3]
Ozkan, E., Sarica, C. and Haci, M. (1999) Influence of Pressure Drop along the Wellbore on Horizontal Well Productivity. SPE September 1999, 57687.
[4]
Collins, D.A., Nghiem, L.X., Agarwal, R.K., et al. (1991) Field-Scale Simulation of Horizontal Wells with Hybrid Grids. SPE Symposium on Reservoir Simulation, Anaheim, February 1991, 21218. https://doi.org/10.2118/21218-MS
[5]
Fan, Z.F. and Fan, H.C. (1997) A Study on Design Method of Optimal Horizontal Wellbore Length. Acta Petrolei Sinica, 18, 8.
[6]
Giger, F.M. (1985) Horizontal Well Production Techniques in Heterogeneous Reservoirs. SPE Middle East Oil Technical Conference and Exhibition, Bahrain, March 1985, 13710.
[7]
Joshi, S.D. (1988) Production Forecasting Methods for Horizontal Wells. SPE International Meeting on Petroleum Engineering, Tianjin, November 1988, 17580.
[8]
Joshi, S.D. (1990) Methods Calculate Area Drained by Horizontal Wells. Oil and Gas Journal, 17, 9.
[9]
Karcher, B.J., Giger, F.M. and Combe, J. (1986) Some Practical Formulas to Predict Horizontal Well Behavior. SPE Annual Technical Conference and Exhibition, New Orleans, October 1986, 15430.
[10]
Fan, Z.F., Song, W.J., Zhou, J.T., et al. (1995) A Study of Determining the Optimal Position of Perforated Interval in a Vertical Well and That of a Horizontal Well. PED.
[11]
Dikken, B.J. (1990) Pressure Drop in Horizontal Wells and Its Effect on Production Performance. Journal of Petroleum Technology, 42, 1426-1433. https://doi.org/10.2118/19824-PA