To shorten the existing box culvert demolition construction period and ensure the normal operation of the railway, the jacking-out construction method was adopted. The ABAQUS finite element software was used to establish a three-dimensional model of the box culvert and soil body of the relying project, and three excavation thickness (0m, 1？m, 2？m) were used as the main variation parameters for numerical analysis and research, and the change law of the box culvert itself and soil body stress during the culvert jacking out process was obtained.？The results show that the jacking force-displacement curves of the three working conditions can be divided into two stages, and the jacking force reaches the maximum value at the moment when the static friction turns into sliding friction at the end of the first stage. The stress distribution at the bottom slab of the box culvert in the jacking process is approximately normal, and the stress decreases with the increase of the roadbed excavation thickness. The increase of the roadbed excavation thickness can reduce the soil pressure on the side of the box culvert and effectively reduce the deformation of the roadbed in the jacking-out process. The deformation of the roadbed during the jacking process can be reduced by increasing the thickness of the roadbed excavation.
References
[1]
Wang, G.Q., Ding, X.H. and Xie, B. (2022) Protective Demolition Technology of Existing Continuous Box Culverts under Busy Trunk Lines—An Example of Linshu Road under Railway Interchange Project. Engineering Technology Research, 7, 76-80. https://doi.org/10.19537/j.cnki.2096-2789.2022.06.023
[2]
Xie, G.H. and Chen, W.R. (2020) Underwater Cutting Technology of Old Bridge Pile Foundation. Highway, 65, 180-184.
[3]
Liu, Z.J., Lei, B. and Ye, K. (2018) Modular Demolition of Large Reinforced Concrete Walls by Rope Saw Method. Construction Technology, 47, 1145-1149.
[4]
Xie, S.L. and Ma, Z.F. (2018) Construction of Temporary Consolidation System and Rope Saw Removal Technology for Large-Span Continuous Girder Bridges. Highway Engineering, 43, 131-135.
[5]
Ma, X.W. (2022) Construction Measurement Technology for Jacking of Large-Section Inclined Box Bridges under the Longhai Railway. Railway Construction Technology, 4, 118-122.
[6]
Shang, P.P. (2021) Research on Line Reinforcement Technology for Double-Hole Frame Bridges under Heavy Railway Jacking Construction Conditions. Railway Construction, 61, 39-43.
[7]
Zhang, B.L. and Li, F.Y. (2022) Numerical Analysis of the Structural Properties of Girdling Beam for a Square Column Used in Bridge Jacking Construction. Mathematical Problems in Engineering, 2022, Article ID: 7481764.
https://doi.org/10.1155/2022/7481764
[8]
Gong, J.W., Zhang, K. and Qi, P.L. (2021) Numerical Analysis on Surface Settlement in Parallel Rectangular Pipe Jacking Construction. Journal of Physics: Conference Series, 2044, Article ID: 012174.
https://doi.org/10.1088/1742-6596/2044/1/012174
[9]
Abuhajar, O., El Naggar, H. and Newson, T. (2016) Numerical Modeling of Soil and Surface Foundation Pressure Effects on Buried Box Culvert Behavior. Journal of Geotechnical and Geoenvironmental Engineering, 142, Article 04016072/
[10]
Guo, R., Nian, T.F., Wang, X.Q., et al. (2020) Friction Coefficient and Stress-Strain on a Soil-Buried Box Culvert Jacking in Highway Construction. Advances in Structural Engineering, 23, 1880-1889. https://doi.org/10.1177/1369433220901819
[11]
GB 50010-2010 (2010) Code for the Design of Concrete Structures. China Standard Press, Beijing.
[12]
Si, H.B. and Cai, Z.Y. (2011) Study on the Establishment of a Soil Ontological Model Library Based on ABAQUS. Geotechnics, 32, 599-603.
https://doi.org/10.16285/j.rsm.2011.02.049
[13]
Liu, S.T. and Cheng, P.F. (2010) A Principal Structure Model Based on ABAQUS Numerical Analysis of Soils. Low Temperature Construction Technology, 32, 90-92.
[14]
Liu, Y., Zhang, M.L., Xin, Y.B. and Chen, W. (2022) Key Construction Techniques for Diagonal Jacking of Box Culverts with Shallow Overburden and Large Intersection Angles. Engineering Construction, 54, 46-49+62.
https://doi.org/10.13402/j.gcjs.2022.01.009
[15]
Li, P.N., Liu, X., Dai, Z.Y., Wang, Q. and Yuan, T.S. (2021) Stability Analysis of Braced Structures under Jacking Construction of Large Span Steel Truss Bridges. IOP Conference Series: Earth and Environmental Science, 861, Article ID: 072064.
https://doi.org/10.1088/1755-1315/861/7/072064
[16]
Chen, W.L., Du, H. and He, W. (2021) System Conversion and Deformation Monitoring in Overhead Jacking Construction of Highways under Railways. Chinese and Foreign Highways, 41, 183-187.
https://doi.org/10.14048/j.issn.1671-2579.2021.04.037
[17]
Wang, S.W., Song, X.D. and Qu, B. (2021) Design and Jacking Construction of Double-Deck Frame Bridge under Railway. Railway Architecture, 61, 41-45.
