|
含铁污泥制备聚合硫酸铁的研究
|
Abstract:
本文主要论述了使用机械加工产生的含铁污泥制备聚合硫酸铁的技术研究,具体研究硫酸浸溶液中铁浓度以及制备的聚合硫酸铁的性能,考察酸浸时、固液比、酸使用量和温度对浸出液中铁浓度的影响;双氧水和硝酸使用量对制备的聚合硫酸铁的性能影响。确定酸浸和制备反应的最佳条件。
This article mainly discusses the technological research on preparing polymeric ferric sulfate from iron-containing sludge generated by mechanical machining. It specifically investigates the concentration of iron in sulfuric acid leaching solution and the performance of the prepared polyferric sulfate. It examines the impacts of acid leaching time, solid-liquid ratio, acid dosage and temperature on the concentration of iron in the leaching solution. It also explores the effects of hydrogen peroxide and nitric acid dosage on the performance of the prepared polyferric sulfate. The optimal conditions for acid leaching and preparation reaction are determined.
[1] | 张丽清, 刘新锋, 周华锋, 等. 由工业废料铁泥制备Fe2SO4?7H2O的研究[J]. 化学工业与工程, 2011, 28(1): 35-38. |
[2] | 潘碌亭, 吴锦峰. 聚合硫酸铁制备技术的研究与进展[J]. 工业水处理, 2009, 29(9): 1-5. |
[3] | 何琳, 向群, 崔益顺. 聚合硫酸铁的合成工艺研究[J]. 化学工程与装备, 2008, 20(5): 15-17. |
[4] | Li, L., Fan, M.H., Brown, R.C., et al. (2009) Production of a New Wastewater Treatment Coagulant from Fly Ash with Concomitant Flue Gas Scrubbing. Journal of Hazardous Materials, 162, 1430-1437.
https://doi.org/10.1016/j.jhazmat.2008.06.035 |
[5] | 唐剑, 邱运仁, 等. 聚合硫酸铁的制备及改性研究进展[J]. 化学工程师, 2009(2): 34-37. |
[6] | 陈满红, 池毓务, 聚合硫酸铁的制备工艺改进[J]. 科技风, 2011(3): 229+231. |
[7] | Dousma, J., De Brugn, P.L. (1996) Hydrolysis-Precipitation Studies of Iron Solutions. I. Model for Hy-drolysis and Precipitation from Fe(III) Nitrate Solutions. Journal of Colloid and Interface Science, 56, 527-539.
https://doi.org/10.1016/0021-9797(76)90119-3 |